データ・AIのスキル

Load and preprocess imaging mass cytometry (IMC) and MIBI data from raw MCD/TXT through hot-pixel removal, spillover compensation, and variance-stabilizing transformation, covering readimc/steinbock ingestion, NNLS spillover compensation (CATALYST), IMC-Denoise, and the IMC arcsinh-cofactor question. Use when starting analysis from raw MCD files, building per-channel TIFF stacks, compensating channel spillover, choosing an arcsinh cofactor, or preparing single-cell intensities for phenotyping.

日本語の概要は準備中です。原文の説明を表示しています。

Handles BED-format genomic intervals (BED3 through BED12, narrowPeak/broadPeak) and the coordinate-system substrate the whole interval category rests on, with bedtools (CLI) and pybedtools/pyranges/pandas (Python). Covers the 0-based half-open vs 1-based-closed convention boundary and the start-1/end-unchanged conversion, the silent failures (chrom-name mismatch, CRLF, lexicographic-vs-version sort under -sorted), genome/chrom.sizes generation, sorting contracts, BED12 block invariants, validation, makewindows, cross-assembly liftover (liftOver/CrossMap), and BED<->VCF/BAM/FASTA conversion. Use when reading, creating, validating, sorting, lifting between genome builds, or converting interval files, preparing inputs for bedtools/tabix/bigBed, or debugging an off-by-one or empty-overlap result.

日本語の概要は準備中です。原文の説明を表示しています。

Assembles a genome de novo from Illumina short reads with SPAdes (isolate/careful/sc/meta/plasmid/rna modes), MEGAHIT (low-memory, huge datasets), Unicycler (bacterial finishing/hybrid), MaSuRCA (large hybrid), ABySS (Bloom-filter), and Platanus (heterozygous diploids), using multi-k de Bruijn graphs. Covers the repeat-resolution limit, why N50 plateaus at the genome not the depth, GenomeScope2 k-mer profiling first, the heterozygosity/haplotig trap, error-correction erasing rare alleles, GC dropout, and NG50/auN/BUSCO reporting. Use when assembling a bacterial isolate, fungal, small-eukaryotic, single-cell, or metagenome genome from Illumina reads, or when deciding whether short reads can even produce the assembly being asked for.

日本語の概要は準備中です。原文の説明を表示しています。

Identifies differential m6A methylation between conditions from MeRIP-seq paired IP/input data using exomePeak2 (GC-bias-aware differential via its bam_ip/bam_input control + bam_treated_ip/bam_treated_input treatment arms), QNB beta-binomial, MeTDiff HMM, and RADAR, plus the paired-symmetric edgeR/DESeq2-on-peak-counts route when batch/lot covariates need fixed-effect handling that exomePeak2's API does not accept. Covers paired vs unpaired vs interaction designs, batch confounding and per-lot meta-analysis, the stoichiometry-vs-expression-vs-IP-efficiency confound, and effect-size filtering against under-powered N=2 designs. Use when comparing m6A across two or more conditions, choosing between exomePeak2/QNB/RADAR/MeTDiff for a design, handling batch confounding when exomePeak2's API is too rigid, distinguishing real hyper/hypo-methylation from expression shifts, applying effect-size thresholds, or planning orthogonal stoichiometry validation (GLORI/SAC-seq/m6Anet mod_ratio).

日本語の概要は準備中です。原文の説明を表示しています。

Assigns pathogen lineages (SARS-CoV-2 Pangolin UShER mode; Nextclade clade + QC; pango-designation alias resolution) and tracks variant frequencies over time using Nextstrain (Augur + Auspice), wastewater deconvolution (Freyja, COJAC, alcov, lineagespot), lineage-fitness modelling (multinomial logistic), and recombinant detection (3SEQ, RDP4, Bolotie). Covers Pangolin pangolin-data and Nextclade dataset version pinning (mandatory; lineage-defining mutations change with dataset), Freyja barcode forward-only date constraint, ARTIC primer scheme churn (V3/V4/V4.1/V5.3.2/Midnight) with dropout regions, and recombinant X-prefix designation lag. Use when assigning Pango lineages and Nextclade clades to viral consensus sequences, building Nextstrain Augur surveillance pipelines, deconvolving wastewater into lineage frequencies with Freyja, tracking lineage frequencies over time, handling ARTIC primer dropouts, or running surveillance for SARS-CoV-2/influenza/Mpox/RSV/H5N1/measles.

日本語の概要は準備中です。原文の説明を表示しています。

Defines cell populations in flow and spectral cytometry through manual gates (rectangle, polygon, quadrant, boolean) and reproducible automated gating (openCyto gating templates, flowDensity data-driven thresholds, flowClust model-based gates), organized as a hierarchical GatingSet (flowWorkspace) and round-tripped with FlowJo via CytoML. Covers the canonical gate order (time -> debris -> singlets -> live -> lineage), FMO-vs-isotype boundary setting, gate-order dependence and recompute semantics, rare-event/MRD gating, and per-population statistics. Use when building a gating strategy, automating a manual FlowJo scheme across samples, choosing manual vs data-driven gates, or extracting population frequencies.

日本語の概要は準備中です。原文の説明を表示しています。

Visualises RNA-modification data with transcript-feature metagene plots (Guitar GuitarPlot; MetaPlotR; deepTools computeMatrix scale-regions), peak-centred heatmaps (ComplexHeatmap; deepTools plotHeatmap), IP-vs-input paired browser tracks (log2 IP/input bigWig via deepTools bamCompare; pyGenomeTracks; Gviz; IGV/UCSC track hubs), DRACH sequence-logo plots (ggseqlogo; MEME), feature-distribution stacked bars, and volcano/MA plots for differential modification. Establishes stop-codon enrichment in the metagene plot as the biological QC anchor for any MeRIP dataset (Dominissini 2012; Meyer 2012). Use when producing the canonical metagene plot with stop-codon enrichment as a QC anchor, building paired IP/input genome-browser tracks at single-locus resolution, plotting peak-centred heatmaps clustered by condition, summarising peak distribution across transcript features, generating DRACH motif logos as sanity checks, rendering volcano plots of differential m6A, or reproducing the stop-codon enrichment plot.

日本語の概要は準備中です。原文の説明を表示しています。

Corrects fluorophore spillover (conventional compensation) or spectral overlap (spectral unmixing) and applies variance-stabilizing transforms (logicle/biexponential, arcsinh, log) for flow and mass cytometry. Covers spillover-matrix estimation from single-stain controls, AutoSpill, the spillover spreading matrix and why panel design (not compensation) bounds resolution, compensate-then-transform ordering, and arcsinh cofactor choice (5 for CyTOF, ~150 for fluorescence, per-channel via flowVS). Use when correcting spectral overlap, preparing data for gating/clustering, choosing logicle vs arcsinh, deciding a cofactor, or distinguishing compensation from spectral unmixing.

日本語の概要は準備中です。原文の説明を表示しています。

Infer gene regulatory networks from bulk or general expression data with mutual-information (ARACNe) and tree-ensemble (GENIE3, GRNBoost2) methods, and infer transcription-factor protein activity from regulons with VIPER and msVIPER. Covers the activity-not-edges paradigm, the undirected-association caveat, the DREAM5 wisdom-of-crowds and method-complementarity result, AUPRC-over-AUROC evaluation, and gold-standard incompleteness. Use when inferring a regulatory network from a bulk expression matrix, finding master regulators, or scoring TF activity from a signature. For single-cell motif-pruned regulons see scenic-regulons; for co-expression modules see coexpression-networks.

日本語の概要は準備中です。原文の説明を表示しています。

Reads, inspects, and writes Flow Cytometry Standard (FCS) files from conventional, spectral, and mass cytometry (CyTOF), and parses FlowJo/Cytobank/Diva workspaces. Covers FCS 2.0/3.0/3.1/3.2 internals ($PnE linear-vs-log, $DATATYPE, $SPILLOVER vs SPILL vs $COMP, $TIMESTEP), channel/parameter metadata, the silent linearize/truncate defaults, and R (flowCore, flowWorkspace, CytoML) plus Python (FlowKit, readfcs) readers. Use when loading flow or mass cytometry data, mapping detector channels to antibodies, extracting the event matrix, choosing a reader, or bridging FCS to the scanpy/AnnData ecosystem before preprocessing.

日本語の概要は準備中です。原文の説明を表示しています。

Bead-based signal normalization and cross-batch harmonization for CyTOF and high-parameter cytometry - EQ four-element bead normalization of instrument sensitivity drift (CATALYST normCytof, premessa), and reference-anchor cross-batch normalization (CytoNorm, per-cluster quantile splines). Covers the distinction between within-run drift correction and between-batch correction, the mandatory anchor/reference sample, why normalization is per-cluster with many quantiles, and the over-correction risk. Use when correcting CyTOF signal drift, harmonizing multi-batch or multi-site studies, or deciding whether to normalize data versus model batch in the design.

日本語の概要は準備中です。原文の説明を表示しています。

Normalizes and transforms RNA-seq count matrices for DE, visualization, clustering, and ML. Covers between-sample (TMM, TMMwsp, RLE/median-of-ratios, upper quartile), within-sample (TPM, FPKM/RPKM), variance-stabilizing (VST, rlog, log-CPM), GC-content correction (cqn, EDASeq), and single-cell (scran deconvolution, scanpy normalize_total). Encodes the composition-bias rationale, the "most genes not DE" assumption and its catastrophic failure modes (MYC amplification, apoptosis, viral host shutoff, prokaryotic stress), the "lengthScaledTPM is not TPM" naming trap, the "TPM is not for DE" rule, the blind=TRUE vs FALSE decision, ERCC spike-in normalization (SBN), and the single-cell zero-inflation breakdown of TMM/RLE. Use when choosing or applying normalization, debugging shifted-MA-plot diagnostics, handling zero-heavy single-cell data, or correcting GC bias.

日本語の概要は準備中です。原文の説明を表示しています。

Calls m6A peaks from MeRIP-seq / m6A-seq paired IP-vs-input data using exomePeak2 (transcript-aware, GC-bias-corrected Poisson GLM), MeTPeak (HMM over sliding windows), MACS3/MACS2 with --nomodel --broad --keep-dup all (genome-wide broad alternative), and DRACH motif enrichment via HOMER or ggseqlogo as a sanity check (NOT a filter). Covers BED12 vs narrowPeak output, exonic vs intronic peak handling, multi-tool reconciliation (intersection vs union), the m6A-vs-m6Am ambiguity at 5'UTR peaks that antibody methods cannot resolve, and orthogonal validation (miCLIP/GLORI/m6A-SAC-seq/m6Anet). Use when calling peaks from paired IP/input genome BAMs, choosing exomePeak2 (transcript-aware default) vs MACS3 (broad genomic) vs MeTPeak (HMM-smoothed low-coverage), confirming DRACH enrichment as a sanity check on the peak set, reconciling differing peak sets across tools, validating MeRIP peaks against single-base methods, interpreting 5' peaks where m6Am contamination is possible, or recommending a consensus strategy.

日本語の概要は準備中です。原文の説明を表示しています。

Infers person-to-person transmission from pathogen genomes using outbreaker2, TransPhylo, phybreak, BadTrIP, SCOTTI, BEASTLIER, and SNP-distance / cluster-picker approaches (HIV-TRACE for HIV; transcluster). Defines outbreak clusters using pathogen-specific SNP thresholds (NOT a universal cutoff -- TB <=12 SNPs; MRSA <=15; C. difficile <=2; Klebsiella <=21), models within-host diversity and transmission bottlenecks, integrates contact-tracing data, distinguishes generation from serial interval, and attributes source via Bayesian source attribution (islandR). Use when investigating outbreaks for who-infected-whom, defining SNP-cluster outbreak definitions, accounting for unsampled intermediates, choosing between outbreaker2 (rich epi data) and TransPhylo (genomic-only after a dated phylogeny), running source attribution between host populations, calling HIV-TRACE thresholds appropriate to the local subtype, or distinguishing recent transmission from reactivation in TB or chronic HIV.

日本語の概要は準備中です。原文の説明を表示しています。

Assigns isolate identity at the right resolution for the question -- ANI/Mash species triage, 7-locus MLST historical comparability, cgMLST/wgMLST outbreak resolution (chewBBACA, BIGSdb, Ridom SeqSphere, EnteroBase HierCC), in-silico serotyping (SISTR/SeqSero2 Salmonella, SerotypeFinder E. coli, Kaptive Klebsiella, SeroBA pneumococcus, spa+SCCmec S. aureus), and lineage callers (TB-Profiler/Mykrobe barcode for MTBC, Pangolin + Nextclade for SARS-CoV-2, PopPUNK GPSC for S. pneumoniae). Use when typing bacterial isolates for surveillance or outbreak investigation, choosing between cgMLST allele distance and core-SNP distance for cluster definition, harmonising calls across schemas/database versions, assigning MTBC lineage with the Napier 90-SNP barcode, calling Salmonella serovar via SISTR with monophasic Typhimurium awareness, running Pangolin UShER mode with pangolin-data version pinning, or selecting a typing resolution to match the surveillance question.

日本語の概要は準備中です。原文の説明を表示しています。

Build publication-quality figures in R with ggplot2 using the grammar of graphics (data + aesthetics + geometries + scales + facets + themes) with CVD-safe palettes, cairo_pdf TrueType embedding, programmatic aes via tidy evaluation, and the theme_classic publication baseline. Use when producing static figures in R for papers, presentations, or reports.

日本語の概要は準備中です。原文の説明を表示しています。

Build Sankey, alluvial, river, and CONSORT-style flow diagrams to visualize cohort transitions, cell-state changes, or pipeline filtering using ggalluvial, networkD3, plotly, and consort. Use when showing how entities move between categories across timepoints (cell states, drug response classes, patient flow through a trial) or filtering pipelines (variants filtered through QC stages).

日本語の概要は準備中です。原文の説明を表示しています。

Compose multi-panel publication figures with patchwork, cowplot, gridExtra (R), or matplotlib GridSpec/subfigures (Python) including shared axes/legends/guides collection, panel labels in Nature/Cell convention, and journal-spec sizing. Covers patchwork ≥1.2.0 axes='collect' feature, Type-42 font embedding, and the cairo_pdf save path. Use when composing 2+ subpanels into a single figure for journal submission.

日本語の概要は準備中です。原文の説明を表示しています。

Add p-value brackets, significance asterisks, and effect-size annotations to distribution plots using ggpubr, ggsignif, and statannotations with correct test selection (parametric vs non-parametric vs paired), multiple-testing adjustment, and rendering of negative results. Use when a boxplot/violin/raincloud needs in-figure statistical comparisons between groups.

日本語の概要は準備中です。原文の説明を表示しています。

Visualize biological networks (PPI, gene-regulatory, co-expression, pathway) with layout algorithm choice (ForceAtlas2, Fruchterman-Reingold, Kamada-Kawai, hive plots), edge bundling, community-based coloring, and reproducible seeds using NetworkX, PyVis, igraph, and Cytoscape automation. Use when rendering biological networks for static publication, interactive HTML exploration, or Cytoscape-format export.

日本語の概要は準備中です。原文の説明を表示しています。

Download raw sequencing reads from NCBI SRA using sra-tools (prefetch, fasterq-dump, vdb-validate) or the ENA mirror. Use when pulling FASTQ for SRR/ERR/DRR accessions, deciding between SRA-direct, ENA mirror, or AWS/GCP cloud mirror (STRIDES), handling --include-technical for 10x and other single-cell records, validating with MD5/vdb-validate, navigating SRR/SRX/SRS/SRP/PRJNA hierarchy, or finding accessions via pysradb. Encodes SRA cloud-egress economics, the fasterq-dump uncompressed-scratch trap, and the --max-size default that silently truncates large prefetches.

日本語の概要は準備中です。原文の説明を表示しています。

Build UpSet plots to visualize set intersections beyond 4 sets (where Venn fails) using ComplexUpset (modern, ggplot2-grammar) or the unmaintained UpSetR, with explicit cardinality vs degree sorting, attribute panels, and query highlighting. Use when comparing overlap across many gene sets, peak sets, variant lists, or any set membership matrix where Venn diagrams become illegible.

日本語の概要は準備中です。原文の説明を表示しています。

Build OncoPrint and co-mutation matrix plots from somatic-variant cohorts using ComplexHeatmap, maftools, and comut.py with alteration-type stacking, sample ordering by mutational burden, mutual-exclusivity overlays, and clinical annotation tracks. Use when visualizing per-sample mutation patterns across recurrent driver genes, comparing alteration classes, or identifying mutually-exclusive / co-occurring driver pairs.

日本語の概要は準備中です。原文の説明を表示しています。

Build genome-browser-style multi-track figures with pyGenomeTracks (config-driven), Gviz (R), and IGV batch screenshotting. Covers BigWig coverage tracks, BED/peak overlays, gene-model rendering, Hi-C matrix tracks, BedPE link arcs, spike-in-aware normalization, and the bamCoverage --normalizeUsing trap. Use when producing publication figures of genomic loci with stacked aligned tracks (coverage, peaks, genes, interactions) for ChIP-seq, ATAC-seq, RNA-seq, Hi-C, or generic locus visualization.

日本語の概要は準備中です。原文の説明を表示しています。