データ・AIのスキル

Analyzes CUT&RUN (Skene Henikoff 2017) and CUT&Tag (Kaya-Okur 2019) chromatin profiling data. Handles SEACR vs MACS2 peak calling (with the btaf375 2025 benchmark guidance), pA-MNase vs pA-Tn5 vs pAG-Tn5 chimera differences, E. coli spike-in carryover normalization, IgG-only control logic (no input), characteristic fragment-size signatures (25-75 bp for CUT&Tag), and lower depth requirements (5M reads typical vs 25M for ChIP). Use when calling peaks from CUT&RUN/CUT&Tag, scaling by E. coli spike-in carryover, choosing SEACR norm mode, or comparing CUT&RUN/Tag results to traditional ChIP.

日本語の概要は準備中です。原文の説明を表示しています。

Identifies differentially bound ChIP-seq regions between conditions using DiffBind, csaw (sliding windows), DESeq2/edgeR/PyDESeq2 on count matrices, NormR (control-aware), or MAnorm2. Distinguishes three distinct normalization problems (composition bias, trended bias, global shifts) and matches each to its appropriate fix including spike-in scaling. Use when comparing ChIP-seq binding between experimental conditions, choosing normalization for global vs local changes, integrating spike-in data, or reconciling DiffBind/DESeq2 disagreement.

日本語の概要は準備中です。原文の説明を表示しています。

Normalizes ChIP-seq data using exogenous spike-in (ChIP-Rx with Drosophila chromatin per Orlando 2014 / Egan 2016; E. coli carryover for CUT&RUN/CUT&Tag). Distinguishes RRPM from Rx-Input scaling, integrates with DiffBind / DESeq2 / edgeR / csaw via sizeFactors and DiffBind library-size vectors, and applies the Patel et al 2024 *Nat Biotechnol* review's failure-mode framework to validate that normalization is correctly applied at the read level (not peak counts). Use when global signal shifts are expected (HDACi, BETi, EZH2i, dosage, target knockdown), when ChIPseqSpikeInFree detects post-hoc shifts, or when validating internal-control regions before publication.

日本語の概要は準備中です。原文の説明を表示しています。

Reads, validates, and prepares CDISC SDTM and ADaM clinical trial data for analysis. Covers SDTM domain joins (DM, AE, EX, VS, LB, DS), ADaM architecture (ADSL, BDS, OCCDS, ADTTE) with traceability, treatment-emergent AE conventions, baseline derivation, SUPPQUAL/NSV handling, Define-XML 2.1, and Pinnacle 21 / CORE validation. Use when working with clinical trial datasets in CDISC SDTM/ADaM format, preparing analysis-ready data, or validating for regulatory submission.

日本語の概要は準備中です。原文の説明を表示しています。

Calls ChIP-seq peaks with MACS3, MACS2, HOMER, or SPP across narrow (TF) and broad (histone) modes. Handles input control matching, fragment-size modeling vs --nomodel, effective genome size, ENCODE-style IDR vs naive overlap, hyper-ChIPable artifacts, and aligner-specific shifts. Use when calling peaks from ChIP-seq alignments, choosing between narrow vs broad mode for a histone mark, deciding model vs nomodel for low-depth data, applying ENCODE pseudoreplicate IDR, or reconciling MACS vs HOMER vs SPP results.

日本語の概要は準備中です。原文の説明を表示しています。

Performs gene-level association from GWAS summary statistics via genetically predicted tissue expression using FUSION, PrediXcan, S-PrediXcan, S-MultiXcan, UTMOST, MOSTWAS, kTWAS, EpiXcan, TIGAR-V2, and probabilistic fine-mapping with FOCUS and MA-FOCUS. Use when running TWAS from GWAS sumstats, prioritising candidate causal genes from a GWAS lead locus, picking single-tissue vs cross-tissue models, identifying LD-induced TWAS false positives, choosing ancestry-matched prediction weights, fine-mapping co-regulated TWAS hits, or triangulating TWAS with cis-eQTL Mendelian randomization and colocalization to nominate a causal gene.

日本語の概要は準備中です。原文の説明を表示しています。

Computes and interprets treatment effect measures (OR, RR, RD, HR, NNT) with calibrated confidence intervals (Wilson, Newcombe, Miettinen-Nurminen, MOVER, profile likelihood, Bender NNT) and reports marginal vs conditional estimands per FDA 2023 covariate adjustment guidance. Use when reporting treatment effects in confirmatory trials, comparing effect sizes across studies, or constructing forest plots.

日本語の概要は準備中です。原文の説明を表示しています。

Performs logistic regression for clinical trial outcomes (binary, ordinal, multinomial) with marginal-vs-conditional estimand reporting per FDA 2023 covariate adjustment guidance, g-computation/standardisation for marginal effects, modified Poisson for RR, Brant test for proportional odds, Firth penalty for separation, and Hauck-Donner detection. Use when modeling binary or ordinal endpoints in confirmatory or exploratory clinical trials.

日本語の概要は準備中です。原文の説明を表示しています。

Standardizes molecular structures using ChEMBL chembl_structure_pipeline and RDKit rdMolStandardize covering sanitization, salt/solvent stripping, neutralization, tautomer canonicalization, stereochemistry standardization, mixture handling, and isotope normalization. Explicitly compares ChEMBL pipeline, canSARchem, and PubChem standardization choices. Use when preparing libraries for QSAR training, joining datasets across sources, deduplicating compound collections, or building canonical compound registries.

日本語の概要は準備中です。原文の説明を表示しています。

Calculates molecular fingerprints (ECFP/Morgan, FCFP, MACCS, RDKit, AtomPair, TopologicalTorsion, Avalon, MAP4, MHFP6) and physicochemical descriptors (Lipinski, QED, TPSA, Crippen LogP, 3D shape) with explicit choice tables, bit vs count semantics, and partial-charge model selection. Use when featurizing molecules for similarity, QSAR, virtual screening, or ML, or selecting the correct fingerprint for a chemotype-aware task.

日本語の概要は準備中です。原文の説明を表示しています。

Performs ML-based protein-ligand pose prediction and scoring using DiffDock-L (diffusion-based), Boltz-1 / Boltz-2 (foundation model with affinity), Chai-1, AlphaFold3 ligand, EquiBind, TANKBind, NeuralPLexer, and hybrid workflows (DiffDock pose + GNINA rescore + PoseBusters QC). Explicit handling of when ML beats classical docking, when classical beats ML, the PB-invalid pose problem, and rescoring as the standard production hybrid. Use when modern docking is needed: foundation-model ligand-pose prediction, AI rescoring of classical poses, or scaffold-hopping in cross-docking scenarios.

日本語の概要は準備中です。原文の説明を表示しています。

Visualizes ChIP-seq data using deepTools (computeMatrix, plotHeatmap, plotProfile, bamCoverage, bamCompare), pyGenomeTracks (modern INI-driven track plots), Gviz (R browser-style), EnrichedHeatmap (ComplexHeatmap-based), ChIPseeker tag heatmaps, and IGV batch screenshots. Handles bigWig normalization choices (CPM, BPM, RPGC, spike-in scaled), bamCompare operations (log2 ratio, subtract, SES), k-means clustering of heatmaps for biological subgrouping, and spike-in-scaled tracks for global-shift experiments. Use when generating publication-quality ChIP-seq signal heatmaps, profile plots, genome-browser tracks, or comparing samples visually.

日本語の概要は準備中です。原文の説明を表示しています。

Segments the genome into chromatin states from combinatorial histone modification and chromatin factor ChIP-seq data. Uses ChromHMM (multivariate HMM on binarized signal, v1.27), Segway (Dynamic Bayesian Network on continuous signal), EpiSegMix (flexible-distribution HMM with duration modeling, 2024), EpiLogos (multi-biosample visualization), IDEAS (cell-type-aware joint), and full-stack ChromHMM (Vu Ernst 2022) for cross-cell-type segmentations. Handles state-count selection (15 vs 18 vs 25 states), binarization choice, OverlapEnrichment / NeighborhoodEnrichment downstream analysis, and cross-biosample integration. Use when learning chromatin states from a histone mark panel, characterizing learned states by genomic feature enrichment, or comparing chromatin landscapes across cell types.

日本語の概要は準備中です。原文の説明を表示しています。

Process and analyze single-cell ATAC-seq data with Signac, ArchR, SnapATAC2, or Cell Ranger ATAC. Use when handling 10X scATAC or 10X Multiome (paired RNA+ATAC) data, performing per-cell QC, choosing between ArchR/Signac/SnapATAC2 ecosystems, building per-cluster consensus peaksets, integrating with paired scRNA-seq, doublet detection (AMULET vs ArchR vs scDblFinder), or running pseudobulk differential accessibility per cluster.

日本語の概要は準備中です。原文の説明を表示しています。

Validate alignment quality with insert size distribution, proper pairing rates, GC bias, strand balance, and other post-alignment metrics. Use when verifying alignment data quality before variant calling or quantification.

日本語の概要は準備中です。原文の説明を表示しています。

Build a differential-ready consensus peakset from per-replicate ATAC-seq peaks using iterative overlap removal, fixed-width re-centering, and majority-rule overlap. Use when generating a stable peak coordinate system for downstream differential accessibility, ML feature engineering, cross-sample comparison, or fixed-width peak counts; covers Corces 2018 iterative overlap (501 bp), DiffBind summit re-centering, and ENCODE consistency rules.

日本語の概要は準備中です。原文の説明を表示しています。

Calculate alignment statistics including sequence identity, conservation scores, substitution matrices, and similarity metrics. Use when comparing alignment quality, measuring sequence divergence, and analyzing evolutionary patterns.

日本語の概要は準備中です。原文の説明を表示しています。

Generate alignment statistics using samtools flagstat, stats, depth, coverage, and mosdepth. Use when assessing alignment quality, calculating coverage, or generating QC reports.

日本語の概要は準備中です。原文の説明を表示しています。

集群数据管理 Skill —— 涵盖数据使用规范、压缩优化、数据共享（ACL）、文件扫描与清理、文件完整性校验、genozip 基因组压缩等全流程。Use when the user asks about: managing data on the HPC cluster, compressing genomic files (fq/bam/vcf), sharing data between users/groups, scanning for large files or cleaning up disk space, checking file integrity (md5/gzip/bam), using genozip, checking disk quota, or any data lifecycle management task on the NCPGR HPC cluster.

日本語の概要は準備中です。原文の説明を表示しています。

Parse and analyze multiple sequence alignments using Biopython. Extract sequences, identify conserved regions, analyze gaps, work with annotations, and manipulate alignment data for downstream analysis. Use when parsing or manipulating multiple sequence alignments.

日本語の概要は準備中です。原文の説明を表示しています。

Detects differential alternative splicing between conditions using rMATS-turbo (binomial LRT on junction counts), leafcutter (Dirichlet-multinomial GLM on intron clusters), MAJIQ V3 deltapsi/HET (Bayesian posterior on LSVs), SUPPA2 (empirical-null on TPM-derived PSI), or Shiba (junction-imbalance-corrected, 2025 SOTA at low coverage). Reports FDR-corrected significance and delta PSI effect sizes. Tools differ in statistical model, annotation dependence, calibration regime, and replicate-count requirements. Use when comparing splicing patterns between treatment groups, tissues, or disease states.

日本語の概要は準備中です。原文の説明を表示しています。

Detects aberrant splicing in single rare-disease patients vs a control panel using FRASER 2.0 (Bioconductor; Beta-binomial autoencoder on Intron Jaccard Index, default delta cutoff 0.1, q hyperparameter), OUTRIDER (gene-level outlier expression via autoencoder denoising), LeafcutterMD (Dirichlet-multinomial outlier mode of LeafCutter for annotation-free junctions), and DROP (Snakemake pipeline integrating FRASER2 + OUTRIDER + monoallelic expression for clinical diagnostics). The statistical model is fundamentally different from differential splicing — single-sample-vs-cohort outlier detection rather than two-group comparison. Standard tool in EU rare-disease (Solve-RD) and NIH UDN programs. Use when applying RNA-seq to undiagnosed Mendelian disease, validating predicted splice variants in clinical samples, or detecting cryptic splicing in disease tissue.

日本語の概要は準備中です。原文の説明を表示しています。

Perform multiple sequence alignment using MAFFT, MUSCLE5, ClustalOmega, or T-Coffee. Guides tool and algorithm selection based on dataset size, sequence divergence, and downstream application. Use when aligning three or more homologous sequences for phylogenetics, conservation analysis, or evolutionary studies.

日本語の概要は準備中です。原文の説明を表示しています。

Generate pileup data for variant calling using samtools mpileup and pysam. Use when preparing data for variant calling, analyzing per-position read data, or calculating allele frequencies.

日本語の概要は準備中です。原文の説明を表示しています。