データ・AIのスキル

Find Earth2Studio models, data sources, and examples for a weather/climate use case. Do NOT use for writing inference code, downloading data, or installation.

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill when the user is doing hands-on NVMe-over-Fabrics storage-target work on a BlueField DPU or ConnectX NIC with DOCA STA — standing up a doca_sta DOCA Core context that accelerates the target-side NVMe-oF data path over RDMA, defining doca_sta_subsystem targets (NQN + namespaces) backed by local NVMe-PCI backend disks (doca_sta_be), checking device support via doca_sta_cap_is_supported, sizing the per-connection I/O queues, or debugging DOCA_ERROR_* from a STA call. Trigger even when the user does not say "DOCA STA" — typical implicit phrasings include "my NVMe-oF Connect never completes", "Identify Controller times out over RoCE", "16 I/O queues at depth 1024 — does this BlueField support that", "offload the nvmf target onto the DPU", or "DOCA_ERROR_IO_FAILED on an NVMe read". Refuse and route elsewhere for DOCA install, raw RDMA data movement, raw packet I/O, flow-rule programming, or initiator-side / host NVMe stack work — those belong to other skills.

日本語の概要は準備中です。原文の説明を表示しています。

Expand workflow HDF5 demonstrations with action jitter, optionally scoped to node segments. Use for synthetic variants; do not use to collect data, alter state directly, or generate new images.

日本語の概要は準備中です。原文の説明を表示しています。

Replay a workflow HDF5 episode through its original Scene. Use for visual trajectory and recording verification; do not use for policy evaluation or LeRobot data.

日本語の概要は準備中です。原文の説明を表示しています。

Create and validate Earth2Studio data source wrappers (DataSource, ForecastSource, DataFrameSource, ForecastFrameSource) from remote stores. Do NOT use for fetching data with existing sources, model inference, or installation tasks.

日本語の概要は準備中です。原文の説明を表示しています。

Serve and visually inspect a converted LeRobot dataset in the browser. Use for videos and state/action timelines; do not use for raw workflow HDF5 or incomplete conversion output.

日本語の概要は準備中です。原文の説明を表示しています。

Grade or filter workflow HDF5 episodes with an OpenAI-compatible vision model. Use for visual success labels; do not use for replay, policy evaluation, or recordings without frames.

日本語の概要は準備中です。原文の説明を表示しています。

Create Earth2Studio prognostic (time-stepping forecast) model wrappers. Do NOT use for diagnostic models, data sources, or installation.

日本語の概要は準備中です。原文の説明を表示しています。

Build deterministic forecast scripts with Earth2Studio (model, data source, IO, inference). Do NOT use for ensemble, diagnostics, data-only fetch, or install.

日本語の概要は準備中です。原文の説明を表示しています。

Convert workflow HDF5 recordings to LeRobot datasets for training or browser inspection. Use for conversion; do not use for replay, augmentation, or raw-data repair.

日本語の概要は準備中です。原文の説明を表示しています。

Record demonstrations through a workflow's teleop Task into workflow HDF5. Use for keyboard, leader, VR, or bus input; do not use for policy evaluation or autonomous rule-based Tasks.

日本語の概要は準備中です。原文の説明を表示しています。

Fetch weather/climate data via Earth2Studio data sources for specific variables and times. Do NOT use for inference pipelines, model discovery, or installation.

日本語の概要は準備中です。原文の説明を表示しています。

RDMA data movement on NVIDIA BlueField/ConnectX NICs (RoCE/InfiniBand) with DOCA RDMA, instead of hand-written libibverbs/rdma_cm. Use when the user moves data between processes or hosts over the NIC, or hits "one-sided read returns permission denied", "completions never arrive after submit", "connection callback never fires", atomic compare-and-swap over RoCE, or DOCA_ERROR_FULL on the send queue under burst, even without naming DOCA RDMA. Covers bringing up an RDMA context on a doca_dev, connection methods (RDMA CM, bridge/OOB, or gRPC exchange of doca_rdma_export()), the eleven task types (Send/Receive/Send-Imm, Read/Write/Write-Imm, Atomic CmpSwap/FetchAdd, Get/Set/Add Remote Sync Event), matching mmap + RDMA permissions, queue and connection sizing, doca_rdma_cap_* queries, and DOCA_ERROR_* from RDMA calls. Raw QP/verbs control belongs to doca-verbs. Refuse and route elsewhere for general RDMA / ibverbs theory (queue pairs, MRs, RoCE vs IB), installing DOCA itself, or non-RDMA DOCA libraries.

日本語の概要は準備中です。原文の説明を表示しています。

DOCA Rivermax (doca_rmax) receive streams for timing-precise media over IP (SMPTE ST 2110 video / audio, market data, scientific feeds) on a BlueField DPU or ConnectX host, once the Rivermax SDK and its license are installed; getting the SDK or license is doca-setup / doca-public-knowledge-map territory. Trigger on "ST 2110 receive isn't getting frames", "sub-microsecond jitter on my media receiver", "NOT_SUPPORTED from doca_rmax_init", "no recv events after stream start", or "license check failing on a media receiver", even without naming Rivermax. Covers doca_rmax_in_stream sessions, the SDK + license precondition check, doca_rmax_get_*_supported capability queries, pairing with doca-eth queues and doca-flow steering, and DOCA_ERROR_* from Rivermax calls. Refuse and route elsewhere for programming the underlying queue (doca-eth), steering rules (doca-flow), PTP / clock sync (doca-firefly), or best-effort packet I/O.

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill when the user has an existing DPDK application and is adding DOCA capabilities in-place — most commonly DOCA Flow hardware steering — without rewriting the data-plane in DOCA-native form: binding a DPDK port id to a `doca_dev` (`doca_dpdk_port_probe` / `doca_dpdk_port_as_dev`), converting `rte_mbuf` ↔ `doca_buf`, querying `doca_dpdk_cap_is_rep_port_supported`, or debugging `DOCA_ERROR_*` from a bridge call. Trigger even without "DOCA DPDK Bridge": "how do I add DOCA Flow to my DPDK app", "make a DPDK port visible to DOCA", "the bridge loads but every operation returns errors", "pkg-config --exists doca-dpdk-bridge fails", or "DOCA_ERROR_NOT_FOUND on port registration". Route elsewhere for fresh DOCA-native packet I/O (doca-eth), flow-rule programming (doca-flow), DOCA or DPDK install (doca-setup), or RDMA data movement (doca-rdma).

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill for hands-on DOCA Ethernet packet-queue work on a BlueField DPU or ConnectX NIC — bringing up a `doca_eth_rxq` or `doca_eth_txq` on a port / representor / SF, picking among the four `enum doca_eth_rxq_type` values (`_REGULAR` / `_CYCLIC` / `_MANAGED_MEMPOOL` / `_SHARED_MEMPOOL`), sizing burst or scatter-gather length against the `_cap_*` queries, submitting `doca_eth_txq_task_send` / `_lso_send` (carrying packet `doca_buf`s — no `doca_eth_frame` struct exists), or debugging DOCA_ERROR_* from an Ethernet call. `doca_eth_rxq` and `doca_eth_txq` are two Core contexts; one `doca_ctx_start()` does not cover both. Trigger on implicit phrasings: "my RX queue is up but no packets arrive", "send-task returns AGAIN at line rate", "which queue type for fixed-MTU ingress", "device open fails without sudo", or "is L3 checksum offload available here". Refuse and route elsewhere for installing DOCA, flow-rule / steering programming, host↔DPU control messaging, or RDMA data movement.

日本語の概要は準備中です。原文の説明を表示しています。

Hardware compression offload with DOCA Compress on a BlueField DPU, ConnectX NIC, or host: DEFLATE compress and decompress, plus LZ4 decompress (stream and block; LZ4 encode is NOT supported), instead of CPU zlib / zstd. Trigger on "offload this gzip", "decompress incoming network data on the NIC", "compress task returns INVALID_VALUE on alloc_init", "submitted a task but no completion arrives", or "decompress LZ4 on the BlueField", even without naming DOCA Compress. Covers enabling compress-deflate, decompress-deflate, decompress-lz4-stream and decompress-lz4-block tasks on a doca_compress context, sizing source / destination doca_buf against the per-task cap query, mmap permissions, offload vs CPU decisions, a round-trip smoke, and DOCA_ERROR_* from Compress calls. Refuse and route elsewhere for zstd / Snappy / brotli, LZ4 encode (a CPU LZ4 library), pure mmap-to-mmap copies (doca-dma), or DOCA Core lifecycle internals.

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill when the user is doing hands-on DOCA Management programming against BlueField / ConnectX devices — standing up a management or representor context (doca_mgmt_dev_ctx / doca_mgmt_dev_rep_ctx), querying device caps (data-direct, caps-general), toggling congestion-control global status, modifying diagnostics-data, setting ICM quotas, or issuing a raw firmware command via doca_mgmt_raw_cmd with the right scope (CONFIGURATION / DEBUG_READ_ONLY / DEBUG_WRITE / DEBUG_WRITE_FULL). Trigger even when the user does not say "DOCA Management" — typical implicit phrasings include "fleet tool that walks every BlueField and reads device state", "toggle data-direct on a VF", "set an ICM quota per representor", "send a raw firmware command from C", "DOCA_ERROR_IO_FAILED from raw_cmd", or "fwctl ioctl is failing". Refuse and route elsewhere for mlxconfig direct operation, BFB / firmware reflash, streaming telemetry, doca_caps CLI snapshots, or DOCA install itself — those belong to other skills.

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill when the user is doing hands-on DOCA DPA host-side work on a BlueField — creating the `doca_dpa` Core context, loading a DPACC-compiled DPA app image (`doca_dpa_app`), creating DPA threads, launching kernels via `doca_dpa_kernel_launch_update_*`, draining `doca_dpa_completion`, running `doca_dpa_cap_*` discovery, choosing between the DPA comm component (inter-DPA messaging) and the DPA verbs component (in-kernel RDMA), or debugging `DOCA_ERROR_*` from `doca_dpa_*`. Trigger even without "DOCA DPA" or "Data-Path Accelerator": "run compute on the DPA from my host", "DPA kernel hangs, no completion", "DOCA_ERROR_DRIVER on launch", "DOCA/DPACC version skew", or "does this BlueField expose a DPA". Route elsewhere for DPA-side kernel programming itself, DPACC compiler internals, host↔DPU messaging (doca-comch), host-side RDMA (doca-rdma), and GPU-initiated networking (doca-gpunetio).

日本語の概要は準備中です。原文の説明を表示しています。

Use when the user wants to create a dataset, generate synthetic data, or build a data generation pipeline.

日本語の概要は準備中です。原文の説明を表示しています。

NVIDIA DeepStream SDK development with Python pyservicemaker API. Use when building video analytics pipelines, GStreamer-based video processing, TensorRT inference integration, object detection/tracking, or Kafka/message broker integration.

日本語の概要は準備中です。原文の説明を表示しています。

Continue KERMT pretraining on a custom SMILES corpus with a grover_base, cmim, or hybrid checkpoint. Use a local checkpoint or optionally download a pinned Hugging Face model bundle using HF_TOKEN if configured. Run containerized training and write model bundles, prepared data, logs, and checkpoints to user-selected host directories.

日本語の概要は準備中です。原文の説明を表示しています。

Run predictions with a finetuned KERMT checkpoint on a SMILES-only CSV. The skill validates that the input ckpt has task FFN heads (refuses pretrain ckpts with a redirect to kermt-finetune), validates the CSV, prepares the data (clean + rdkit_2d features), then launches main.py predict inside the kermt container (blocking, minutes-scale).

日本語の概要は準備中です。原文の説明を表示しています。

NOTE: molecule and target inputs and your NGC_API_KEY are transmitted to external NVIDIA-hosted API endpoints on every call. Use local NIM containers for confidential or proprietary data. Run a complete computational drug discovery pipeline using NVIDIA BioNeMo NIMs: generate drug-like molecules with GenMol, dock them to a protein target with DiffDock, then predict binding affinity with Boltz2. Use this skill whenever the user wants to generate and screen small molecule drug candidates, perform hit discovery, optimize leads against a protein target, or do virtual screening combining molecule generation, docking, and affinity prediction. Triggers on: drug discovery pipeline, hit discovery, lead optimization, virtual screening, molecule generation, molecular docking, binding affinity, GenMol, DiffDock, Boltz2, SMILES, SAFE notation, NIM microservice. This is a multi-step pipeline composing three BioNeMo NIMs.

日本語の概要は準備中です。原文の説明を表示しています。