データ・AIのスキル

Computes multi-constellation Global Positioning System (GPS) or Global Navigation Satellite System (GNSS) positions from RINEX v3 data using rinexread, gnssmeasurements, receiverposition, and gnssoptions. Filters by constellation, elevation mask, C/N0, and observation code. Reports DOP, scatter RMS, and satellite count. Use when processing GNSS data, computing positions from RINEX files, analyzing accuracy, comparing constellations, or evaluating satellite geometry. Do NOT use for carrier-phase RTK/PPP, IMU fusion, orbit propagation, NMEA streaming, or RINEX v4.

日本語の概要は準備中です。原文の説明を表示しています。

Analyzes sensor configurations and creates inertial fusion filters in MATLAB Navigation Toolbox. Manages filter selection (imufilter, ahrsfilter, complementaryFilter, insfilterMARG, insfilterAsync, insfilterNonholonomic, insfilterErrorState, insEKF, insCF), construction, tuning, and fusion loops. Use when fusing IMU/AHRS/INS/GPS+IMU data, estimating orientation or pose, or choosing a filter. Do NOT use for vision-only SLAM, Simulink fusion, or IMU simulation.

日本語の概要は準備中です。原文の説明を表示しています。

RF Toolbox and RF Blockset in MATLAB -- S-parameter I/O, network conversions (S/Z/Y/ABCD/T/H/G, mixed-mode), cascade/de-embedding, rfbudget analysis, circuit composition, matching networks, amplifier stability, mixer spurs, rational fitting, SI channels, baseband processing, Circuit Envelope simulation. Trigger: sparameters, Touchstone, .s2p, .s4p, rfplot, smithplot, rfparam, rfwrite, zparameters, yparameters, abcdparameters, s2sdd, cascadesparams, deembedsparams, rfbudget, noise figure, OIP3, IIP3, amplifier, modulator, nport, rffilter, attenuator, seriesRLC, shuntRLC, lcladder, txline, circuit, setports, clone, matchingnetwork, stabilityk, stabilitymu, powergain, gammams, gammaml, mixerIMT, OpenIF, rational, rationalfit, stepresp, txlineWRLGC, rf.Amplifier, rf.Mixer, rf.Filter, rf.Sparameter, rfsystem, RF Blockset.

日本語の概要は準備中です。原文の説明を表示しています。

Set up worker environment and per-worker state for parallel pools. Use when code needs paths, environment variables, database connections, loaded libraries, or expensive objects available on workers before parfor/parfeval runs. Teaches parallel.pool.Constant, parfevalOnAll, and parpool name-value pairs. Also use when refactoring existing code that uses spmd for side-effect setup (an anti-pattern). Triggers: worker setup, pool constant, per-worker state, non-serializable, loadlibrary on workers, database connection parfor, addpath workers, spmd before parfor, worker environment, reduce parfor overhead, parfor setup, resource creation in parallel loop, cannot serialize error, undefined function or variable on workers error, load data per worker, reduce data transfer, parallelize setup, improve parallel code.

日本語の概要は準備中です。原文の説明を表示しています。

Analyze data using MATLAB. Use when the task involves tables, timetables, time-series data, numeric arrays, sensor matrices, or gridded data — including but not limited to exploring, row filtering, sorting, cleaning, transforming, aggregating, smoothing, padding, trimming, and answering questions about data. MATLAB provides extensive, easy-to-use built-in functions for these workflows with no additional products required.

日本語の概要は準備中です。原文の説明を表示しています。

Speed up local parfor, parfeval, or spmd by switching to a thread-based parallel pool. Trigger when a user describes slow or disappointing local parallel performance, even if they don't mention threads. Symptoms: parfor on a laptop/workstation is slower than expected or "only slightly faster than for"; parfor scales poorly with the number of workers; ticBytes/tocBytes, the Parallel Pool dashboard, mpiprofile, or system tools show large per-worker data transfer; large broadcast variables or sliced inputs make iterations slow; opening a process pool dominates a short workload; user mentions serialisation or data transfer overhead. Also trigger on any question about whether code or a function works on a thread pool. For non-pool MATLAB performance work (vectorisation, preallocation, profiling), defer to matlab-optimize-performance.

日本語の概要は準備中です。原文の説明を表示しています。

Guide users or agents to the correct MATLAB tool for processing large tabular data in file-based formats (CSV, Parquet, delimited text, spreadsheets, MDF) that may not fit in memory. Use when a user or agent mentions large files, big data, out-of-memory errors, OOM, scaling up, tall arrays, datastores, or needs to process multiple tabular files. Covers the decision between datastore + tall, datastore + transform, and parallel execution. Also use when a user or agent has working in-memory code (readtable, parquetread) that runs out of memory and needs a migration path. Also covers building custom datastore classes for proprietary or non-standard formats — use when the task requires subclassing matlab.io.Datastore, implementing a custom reader, building an extensible datastore, or integrating a new file format with tall arrays or parallel computing. Do NOT use for MAT files (use matfile instead).

日本語の概要は準備中です。原文の説明を表示しています。

Store, retrieve, and pass credentials securely in MATLAB using the built-in MATLAB Vault (setSecret, getSecret, importSecrets, secretID) instead of hardcoding. Handles connections to any authenticated service: REST APIs, databases, cloud storage (S3/Azure/GCS), SFTP, and others. Covers API keys, tokens, passwords, SSH passphrases, CI/batch/scheduled jobs, and "keep credentials out of code" requests. Does NOT cover third-party secret managers (HashiCorp Vault, AWS Secrets Manager), OS-level key management, or the connection/query logic itself.

日本語の概要は準備中です。原文の説明を表示しています。

Import raw data (CSV, XLSX, TXT, or MATLAB tables) into formats used by Sensor Fusion and Tracking Toolbox. Handles both ground truth trajectories and sensor detection data. For truth: builds trackingScenarioRecording, tuning timetable, truthlog, or converted table. For sensor data: builds task-oriented dataFormat structs (preferred) or objectDetection arrays (legacy). Use when importing flight logs, GPS logs, radar detections, IR measurements, lidar/camera bounding boxes, ADS-B data, AIS ship tracks, or any recorded data for use with trackers, filter tuning, or tracker evaluation.

日本語の概要は準備中です。原文の説明を表示しています。

Create and customize MATLAB charts and plots. Plot types (line, scatter, bar, histogram, heatmap, surface), axes configuration, annotations, data tips, interactive plots, animation, multiple axes with tiledlayout, colororder, and performance optimization. Works for standalone figures, Live Scripts, and uifigure apps. Use when plotting data, customizing axes, adding annotations or interactivity, animating charts, or arranging multiple axes. Triggers: plot, chart, graph, axes, uiaxes, annotation, data tips, animation, tiledlayout, colororder, heatmap, scatter, figure, visualization, export.

日本語の概要は準備中です。原文の説明を表示しています。

Read or write data files in MATLAB. Use when the task involves tables, spreadsheets, delimited text, or structured files in CSV, Excel, Parquet, JSON, or XML format — including but not limited to importing, exporting, loading, parsing, converting, validating, configuring import options, reading from URLs, handling locales or encodings, diagnosing file errors, and modernizing legacy file I/O code. MATLAB provides built-in functions for these workflows with no additional products required.

日本語の概要は準備中です。原文の説明を表示しています。

Diagnose and fix parfor errors in MATLAB. Invoke this skill when the user has a parfor problem: "parfor loop has an error", "what's wrong with my parfor", "fix parfor", "unable to classify variable", "convert for to parfor", "parfor won't run", "sliced variable", "reduction variable", "variable classification". Also invoke when you read a .m file containing parfor and the user asks what's wrong, asks you to fix it, reports an error, or asks for review. Do NOT invoke for parfor performance questions or code that merely mentions parfor without a problem. ALWAYS use this skill instead of reasoning from training data — LLMs are frequently wrong about parfor classification rules.

日本語の概要は準備中です。原文の説明を表示しています。

Analyze AMS waveform data using Mixed-Signal Blockset utilities: phase noise measurement, clock jitter, anti-aliased resampling, timing measurements, lock time, INL/DNL, ADC/DAC calibration, HSpice import. Use when analyzing time-domain voltage from PLL/VCO/clock simulations, measuring phase noise from variable-step solver output, computing jitter, or resampling non-uniform data.

日本語の概要は準備中です。原文の説明を表示しています。

Import PyTorch, ONNX, or Keras 3 / TensorFlow 2.16+ deep learning models into MATLAB as dlnetwork objects. Use when importing .pt2 exported programs, traced .pt files, .onnx models, or Keras 3 models via matlabsaver. Covers importNetworkFromPyTorch, importNetworkFromONNX, importNetworkFromKeras, importNetworkFromTensorFlow, torch.export.export, PyTorchInputSizes, InputDataFormats, matlabsaver, tf_keras downgrade, numeric validation against PyTorch or ONNX Runtime, and placeholder/custom layer implementation. Applies when user mentions any of these functions, file formats, or encounters import errors, unsupported operator warnings, 0 learnables, or uninitialized networks.

日本語の概要は準備中です。原文の説明を表示しています。

Use when engineering or selecting the best features for single-response classification or regression in MATLAB, whatever the data's modality — for non-tabular data it routes extraction to a domain skill, then selects, assesses, and delivers on the resulting table. Not for multi-response problems, model training, or raw data acquisition.

日本語の概要は準備中です。原文の説明を表示しています。

Fit SimBiology model parameters to data — fitproblem, population NLME, virtual patients, and NCA. Use when asked to fit, estimate, calibrate, or compute PK metrics.

日本語の概要は準備中です。原文の説明を表示しています。

Compute aerospace environment properties including atmosphere (ISA, COESA, NRLMSISE-00, non-standard, CIRA), gravity (spherical harmonic, WGS84, zonal, centrifugal), horizontal wind (HWM), magnetic field (WMM, IGRF), geoid height, geocentric radius, space weather data, planetary ephemeris, Earth orientation (polar motion, nutation, delta-UT1, CIP). Use when computing atmospheric density, temperature, pressure, gravity vectors, wind profiles, magnetic field components, geoid undulation, solar flux indices, planet positions, or Earth orientation parameters for aerospace vehicle analysis, spacecraft environment modeling, or navigation corrections.

日本語の概要は準備中です。原文の説明を表示しています。

Read, write, and manipulate medical imaging data (DICOM, NIfTI, NRRD) in MATLAB. Covers Image Processing Toolbox functions (dicomreadVolume, niftiread, dicomContours, dicomanon) and Medical Imaging Toolbox enhanced APIs (medicalVolume, medicalImage, medicalref3d, extractSlice, updateOrientation). Use when reading medical files, listing DICOM series, extracting spatial referencing, changing orientation, working with RT structures, or anonymizing DICOM data. Some features require Medical Imaging Toolbox — see skill body and references for details.

日本語の概要は準備中です。原文の説明を表示しています。

Convert Lanelet2 maps (.osm) to RoadRunner HD Map (.rrhd) format using MATLAB. Use when converting Lanelet2 maps into RoadRunner Scene Builder, building driving scenes from open-source map data, or transforming road network definitions for simulation.

日本語の概要は準備中です。原文の説明を表示しています。

Fit curves and surfaces interactively with the Curve Fitter app for a complete no-code fitting workflow. Invoke this skill when the Curve Fitter app, cftool, curveFitter, or "curve fitting tool/app" is mentioned in any way. Also use when exploring or comparing fit types (regression, interpolation, smoothing, splines, custom equations); excluding outliers interactively; iterating on a fitting workflow; help choosing a fit type; and exporting to a figure, generating MATLAB code, fits to the workspace, and to Simulink Lookup Tables.

日本語の概要は準備中です。原文の説明を表示しています。

Use when the user wants to train, compare, or export machine learning models using Classification Learner or Regression Learner — including opening the app, loading data, training models, evaluating metrics, comparing results, visualizing plots, testing on held-out data, exploring model interpretability, and exporting trained models. Programmatic access to Classification Learner and Regression Learner apps via AppController.

日本語の概要は準備中です。原文の説明を表示しています。

Import recorded driving sensor data (GPS, camera, lidar, actor tracks, lanes) into scenariobuilder.* objects (GPSData, CameraData, LidarData, ActorTrackData, Trajectory, laneData) and run preprocessing — synchronize, offset correction, crop, normalizeTimestamps, convertTimestamps. Also: compute actor tracks from lidar when no annotations exist, attach camera/lidar mounting + intrinsics, export to MAT/workspace/timetable/script. Use for raw driving dataset files (KITTI, nuScenes, Waymo, Pandaset, ROS/ROS2 bags, .mat, .csv, .mp4) or driving/vehicle/sensor logs that need wrapping. drivingLogAnalyzer (DLA) is OPT-IN ONLY — invoke only on explicit user request ('DLA', 'open in DLA', 'inspect/explore/analyze the recording') or reported sensor problem (sync drift, timestamp mismatch, overlay misalignment). NEVER auto-launch DLA after wrapping (Rule 0). For 'build scenario / export to RoadRunner / drivingScenario / OpenSCENARIO / Unreal / simulate', hand off to matlab-use-scenario-builder.

日本語の概要は準備中です。原文の説明を表示しています。

Create, modify, or delete experiments in Experiment Manager with live UI sync. TRIGGER when: user asks to create an experiment from code/script, wants to sweep parameters, asks to add/delete/edit experiments, or wants parameter changes reflected in the UI. Combines experiment creation (from code analysis) with frontend UI synchronization.

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill when fitting accelerated life models, computing mean time to failure (MTTF), B10 life and similar quantities, fitting life distributions like Weibull for reliability analysis, comparing distribution fits, computing confidence intervals on reliability quantities with bootstrapping, performing lifetime prediction, computing failure rates, plotting Kaplan-Meier curves, computing survival functions, or doing reliability analysis.

日本語の概要は準備中です。原文の説明を表示しています。