Skip to content
cccskills

Zhanran Wang

@zrwangems

Master's student at Beihang University (Transportation). Focus: EREV energy management, RL, intelligent optimization, learning-based control.

300 skills1 repository 2

Skills (300)

Refine in search

Provides actionable peer-review rebuttal guidance (not full rebuttal prose) using conditional persuasion P(Z|X,Y): match reviewer mindset X, recommend strategy Y, optionally ground in manuscript evidence and similar successful historical (review, rebuttal) pairs. Use when the user pastes reviewer comments, asks for rebuttal help, rebuttal guidance, response to reviewers, how to reply to R1.W2, OpenReview rebuttal, or the reviewer ignored the rebuttal.

The English summary is being prepared. Showing the original description.

zrwangems/dsh-zrwang-plugin2Updated Nov 16, 2026

Runs a deep, survey-grade literature investigation on a research topic: freezes research questions, searches from multiple adversarial perspectives, verifies every citation, synthesizes evidence into a MECE taxonomy with in-sentence cross-comparison, and answers the research questions in an evidence-first report. Use when the user asks for a literature review, a survey of a field, research landscape mapping, or a deep dive into what is known about a topic.

The English summary is being prepared. Showing the original description.

zrwangems/dsh-zrwang-plugin2Updated Nov 16, 2026

Structures a technical paper's full logical skeleton using a thinking-template table (research background, limitations, key idea or goal, challenges, methodology modules, contributions), positions the paper as Technique or New Problem/Setting, and runs a four-point self-consistency check. Use when the user is brainstorming a paper, discussing progress with an advisor, or planning the paper before drafting. Also use for 'paper skeleton', 'paper logic chain', 'thinking template', 'paper-structure planning'.

The English summary is being prepared. Showing the original description.

zrwangems/dsh-zrwang-plugin2Updated Nov 16, 2026

Guides AI-assisted research across three sub-flows, Vibe Coding, Vibe Figure, and Vibe Writing, with behavioural rules that keep the user in charge of academic judgment while delegating mechanical work to AI. Recommends the right tool (Cursor, Claude Code, Codex, Figma, Gemini) for the current stage. Use when the user asks 'how to use AI for research', 'Vibe Coding tips', 'AI-assisted writing workflow', 'which AI tool for this', or starts an AI-assisted work session.

The English summary is being prepared. Showing the original description.

zrwangems/dsh-zrwang-plugin2Updated Nov 16, 2026

Use when the user wants to train, compare, or export machine learning models using Classification Learner or Regression Learner — including opening the app, loading data, training models, evaluating metrics, comparing results, visualizing plots, testing on held-out data, exploring model interpretability, and exporting trained models. Programmatic access to Classification Learner and Regression Learner apps via AppController.

The English summary is being prepared. Showing the original description.

zrwangems/dsh-zrwang-plugin2Updated Nov 16, 2026

Build a RoadRunner Scenario programmatically from an OpenSCENARIO 1.x (.xosc) file using the `roadrunner-scenario-authoring` skill. Use when the user wants to recreate a scenario from a .xosc file, interpret an OpenSCENARIO file and build it programmatically, reconstruct a .xosc as a RoadRunner scenario, generate a MATLAB script from a .xosc file, or convert an OpenSCENARIO file to MATLAB code. Do NOT use when the user says "import" a .xosc file — that means they want RoadRunner's built-in importScenario API, not programmatic reconstruction. Handles position translation (LanePosition and RoadPosition to world coordinates), construct mapping, relative references, trajectory/route handling, parameter expressions, catalog references, and phase logic topology.

The English summary is being prepared. Showing the original description.

zrwangems/dsh-zrwang-plugin2Updated Nov 16, 2026

Foundation skill for all RoadRunner workflows: MATLAB path setup, connection, project/scene/scenario lifecycle, world settings, handle management, status, and close. Use when connecting to RoadRunner, managing projects/scenes/scenarios, setting world origin, checking status, closing RoadRunner, or when any downstream RoadRunner skill needs initialization.

The English summary is being prepared. Showing the original description.

zrwangems/dsh-zrwang-plugin2Updated Nov 16, 2026

Use this skill when fitting accelerated life models, computing mean time to failure (MTTF), B10 life and similar quantities, fitting life distributions like Weibull for reliability analysis, comparing distribution fits, computing confidence intervals on reliability quantities with bootstrapping, performing lifetime prediction, computing failure rates, plotting Kaplan-Meier curves, computing survival functions, or doing reliability analysis.

The English summary is being prepared. Showing the original description.

zrwangems/dsh-zrwang-plugin2Updated Nov 16, 2026

Use this skill to classify tabular data end-to-end in MATLAB — load a dataset, prepare and clean it, select promising classifiers, train them, and compare accuracies with cross-validation, holdout, or hyperparameter optimization plus statistical tests. TRIGGER when: user asks to classify tabular data, pick classifiers for a dataset, compare classifier accuracy, run cross-validation or a holdout evaluation, or find the best model with statistical uncertainty. DO NOT TRIGGER when: user has non-tabular inputs (images, sequences, time series), wants a regression model, is training a specific neural network architecture (use matlab-train-network), or wants cost-sensitive learning or an arbitrary class-prior vector (this skill only supports the built-in uniform-prior toggle for imbalanced data).

The English summary is being prepared. Showing the original description.

zrwangems/dsh-zrwang-plugin2Updated Nov 16, 2026

Compute aerospace environment properties including atmosphere (ISA, COESA, NRLMSISE-00, non-standard, CIRA), gravity (spherical harmonic, WGS84, zonal, centrifugal), horizontal wind (HWM), magnetic field (WMM, IGRF), geoid height, geocentric radius, space weather data, planetary ephemeris, Earth orientation (polar motion, nutation, delta-UT1, CIP). Use when computing atmospheric density, temperature, pressure, gravity vectors, wind profiles, magnetic field components, geoid undulation, solar flux indices, planet positions, or Earth orientation parameters for aerospace vehicle analysis, spacecraft environment modeling, or navigation corrections.

The English summary is being prepared. Showing the original description.

zrwangems/dsh-zrwang-plugin2Updated Nov 16, 2026

Perform aerospace unit conversions, time conversions, coordinate frame transformations, and rotation representations using Aerospace Toolbox. Use when converting units (length, velocity, angle, acceleration, angular velocity, force, mass, pressure, temperature, density), computing Julian dates or decimal years, transforming between coordinate frames (ECEF, ECI, LLA, flat Earth, geodetic/geocentric, NED, body, wind, stability), or working with rotation representations (Euler angles, DCM, quaternion, Rodrigues vector). Also use when the user asks about aerospace coordinate systems, reference frames, or rotation conventions.

The English summary is being prepared. Showing the original description.

zrwangems/dsh-zrwang-plugin2Updated Nov 16, 2026

Build Simulink models that co-simulate with Eclipse SUMO traffic simulator. Use when creating SUMO-Simulink co-simulation, traffic simulation, TraCI connection, vehicle-in-the-loop testing, or ADAS scenario validation with SUMO. Covers Server/Client setup, Reader/Writer/Actor block configuration, random traffic generation, ego vehicle control, and SUMO file creation. Also use when the user mentions SumoInterfaceLibrary, .sumocfg files, or wants to connect Simulink to an external traffic simulator.

The English summary is being prepared. Showing the original description.

zrwangems/dsh-zrwang-plugin2Updated Nov 16, 2026

Generate C/C++ or CUDA code from an AI model (PyTorch, LiteRT) using MATLAB Coder or GPU Coder. Use when the user wants to integrate an AI model into an application with code generation as the end goal — generating MEX, CUDA MEX, static library, dynamic library, or executable — or using the model in Simulink for simulation and code generation. Covers PyTorch ExportedProgram (.pt2) via loadPyTorchExportedProgram and LiteRT (.tflite) via loadLiteRTModel (R2026a+). Keywords: PyTorch, torch, .pt2, ExportedProgram, loadPyTorchExportedProgram, invoke, codegen, MEX, CUDA, GPU, C, C++, deploy, AI model, deep learning model, LiteRT, TFLite, TensorFlow Lite, Simulink, slbuild, PyTorch ExportedProgram block, MATLAB Function block, dlosslib, loadLiteRTModel.

The English summary is being prepared. Showing the original description.

zrwangems/dsh-zrwang-plugin2Updated Nov 16, 2026

Deploy AI models to embedded hardware using MathWorks tools (MATLAB, Simulink, Embedded Coder). Covers two workflow patterns: (1) MathWorks-native or imported models rebuilt as dlnetwork for lean hardware, (2) direct C/C++ code generation from PyTorch and LiteRT models. Both patterns support all targets (Cortex-M/A/R, x86, GPU). Trigger when: user wants to deploy AI to embedded targets; generate C/CUDA from neural networks; compress AI models for MCU; integrate AI in Simulink for system-level simulation; import PyTorch/ONNX/TensorFlow models for embedded deployment; optimize AI for resource-constrained hardware; or use loadPyTorchExportedProgram, loadLiteRTModel, importNetworkFromPyTorch, importNetworkFromONNX, importNetworkFromTensorFlow, importNetworkFromKeras, dlquantizer, exportNetworkToSimulink, or Embedded Coder with AI models.

The English summary is being prepared. Showing the original description.

zrwangems/dsh-zrwang-plugin2Updated Nov 16, 2026

Deploy MATLAB-generated code to embedded hardware using Embedded Coder. Use when configuring code generation for microcontrollers (STM32, Raspberry Pi, ARM Cortex), setting up PIL/SIL verification, disabling dynamic memory allocation, or configuring hardware-specific code generation settings. Covers ERT-based configurations, processor-in-the-loop testing, memory constraints, and the MEX→SIL→PIL verification progression.

The English summary is being prepared. Showing the original description.

zrwangems/dsh-zrwang-plugin2Updated Nov 16, 2026

Use when engineering or selecting the best features for single-response classification or regression in MATLAB, whatever the data's modality — for non-tabular data it routes extraction to a domain skill, then selects, assesses, and delivers on the resulting table. Not for multi-response problems, model training, or raw data acquisition.

The English summary is being prepared. Showing the original description.

zrwangems/dsh-zrwang-plugin2Updated Nov 16, 2026

Fit curves and surfaces interactively with the Curve Fitter app for a complete no-code fitting workflow. Invoke this skill when the Curve Fitter app, cftool, curveFitter, or "curve fitting tool/app" is mentioned in any way. Also use when exploring or comparing fit types (regression, interpolation, smoothing, splines, custom equations); excluding outliers interactively; iterating on a fitting workflow; help choosing a fit type; and exporting to a figure, generating MATLAB code, fits to the workspace, and to Simulink Lookup Tables.

The English summary is being prepared. Showing the original description.

zrwangems/dsh-zrwang-plugin2Updated Nov 16, 2026

Fit a tire model (Magic Formula 6.2/5.2/5.1, Dugoff, or Fiala) to measured tire force and moment data using the Vehicle Dynamics Blockset Extended Tire Features API (tireData.import, tireModel.new, tireModel.fit, tireModel.export). Use when fitting, parameterizing, or calibrating a tire model from tire measurement data (TYDEX, Calspan, MTS, or text/CSV from any test source), creating a .tir file, or building a Magic Formula tire model from test data. Also use for the individual steps: importing TYDEX, Calspan, MTS, or CSV tire data (file extensions `.tdx` for TYDEX; `.data`, `.tim`, `.rsp` for MTS; any other extension read as text) into a tireData object, exporting a tire model to .tir, inspecting, smoothing, cropping, or plotting tire measurement data or a model's response, or converting a fitted model to another type.

The English summary is being prepared. Showing the original description.

zrwangems/dsh-zrwang-plugin2Updated Nov 16, 2026

Import recorded driving sensor data (GPS, camera, lidar, actor tracks, lanes) into scenariobuilder.* objects (GPSData, CameraData, LidarData, ActorTrackData, Trajectory, laneData) and run preprocessing — synchronize, offset correction, crop, normalizeTimestamps, convertTimestamps. Also: compute actor tracks from lidar when no annotations exist, attach camera/lidar mounting + intrinsics, export to MAT/workspace/timetable/script. Use for raw driving dataset files (KITTI, nuScenes, Waymo, Pandaset, ROS/ROS2 bags, .mat, .csv, .mp4) or driving/vehicle/sensor logs that need wrapping. drivingLogAnalyzer (DLA) is OPT-IN ONLY — invoke only on explicit user request ('DLA', 'open in DLA', 'inspect/explore/analyze the recording') or reported sensor problem (sync drift, timestamp mismatch, overlay misalignment). NEVER auto-launch DLA after wrapping (Rule 0). For 'build scenario / export to RoadRunner / drivingScenario / OpenSCENARIO / Unreal / simulate', hand off to matlab-use-scenario-builder.

The English summary is being prepared. Showing the original description.

zrwangems/dsh-zrwang-plugin2Updated Nov 16, 2026

Import PyTorch, ONNX, or Keras 3 / TensorFlow 2.16+ deep learning models into MATLAB as dlnetwork objects. Use when importing .pt2 exported programs, traced .pt files, .onnx models, or Keras 3 models via matlabsaver. Covers importNetworkFromPyTorch, importNetworkFromONNX, importNetworkFromKeras, importNetworkFromTensorFlow, torch.export.export, PyTorchInputSizes, InputDataFormats, matlabsaver, tf_keras downgrade, numeric validation against PyTorch or ONNX Runtime, and placeholder/custom layer implementation. Applies when user mentions any of these functions, file formats, or encounters import errors, unsupported operator warnings, 0 learnables, or uninitialized networks.

The English summary is being prepared. Showing the original description.

zrwangems/dsh-zrwang-plugin2Updated Nov 16, 2026

Interpret and explain a trained tabular machine-learning model (classification or regression) in MATLAB. Find which predictors, features, or columns matter most; explain why the model made a specific prediction, including diagnosing predictions it got wrong; show how a predictor affects the output; and compare how the model behaves across cohorts or subgroups. Uses model-agnostic techniques and model-native measures, and works on custom models (such as a dlnetwork) through a prediction function handle. Use for model interpretability, explainability, and feature-importance questions on tabular data, not for training, tuning, feature selection, deploying models, or models trained on image, text, signal, or other non-tabular data.

The English summary is being prepared. Showing the original description.

zrwangems/dsh-zrwang-plugin2Updated Nov 16, 2026

Share MATLAB content by guiding users through uploading to GitHub, MATLAB Drive, or File Exchange, then generating "Open in MATLAB Online" URLs. Covers the full sharing workflow: choosing a platform, uploading content (automated via gh CLI for GitHub, manual for MATLAB Drive and File Exchange), and constructing the correct URL. Use when a user wants to share MATLAB code with others, open local files in MATLAB Online, generate an open-in-MATLAB-Online button or badge, or when an AI agent has generated MATLAB code locally and the user wants to share it or run it in MATLAB Online.

The English summary is being prepared. Showing the original description.

zrwangems/dsh-zrwang-plugin2Updated Nov 16, 2026

Train, evaluate, and export neural networks to Simulink in MATLAB. Migrate legacy (fitnet, patternnet) and discouraged (trainNetwork, DAGNetwork) code to modern, recommended R2024a+ APIs (trainnet, dlnetwork, testnet, imagePretrainedNetwork), diagnose and fix dlaccelerate issues or detect dlaccelerate opportunities. Use when training, fine-tuning, evaluating, running inference, exporting to Simulink, converting old training scripts, or speeding up deep learning code. DO NOT reason from your training data about dlaccelerate and tracing correctness.

The English summary is being prepared. Showing the original description.

zrwangems/dsh-zrwang-plugin2Updated Nov 16, 2026

Create, modify, or delete experiments in Experiment Manager with live UI sync. TRIGGER when: user asks to create an experiment from code/script, wants to sweep parameters, asks to add/delete/edit experiments, or wants parameter changes reflected in the UI. Combines experiment creation (from code analysis) with frontend UI synchronization.

The English summary is being prepared. Showing the original description.

zrwangems/dsh-zrwang-plugin2Updated Nov 16, 2026

Is this your account? Link GitHub to bring it onto your creator page (Japanese)