Browse skills

Use this skill when the user asks to summarize, or asks why Simulink Coverage objectives are missing, unsatisfied, or uncovered on a coverage result they already have — why specific decision, condition, MCDC, relational-boundary, or saturation/overflow outcomes weren't exercised, whether uncovered logic is dead code, or how to close the gap (a test, a coverage filter, or a design change). It reads an existing cvdata, .cvt file, sim-with-coverage output, or Simulink Test result; it never runs cvsim to collect coverage.

The English summary is being prepared. Showing the original description.

Common steps for building multi-layer system architecture models using System Composer. Use when implementing architecture models or when interacting with interface dictionaries, allocation sets, stereotypes, and requirements for architecture components.

The English summary is being prepared. Showing the original description.

Generates draft requirements from Simulink models. Use when drafting or updating requirement artifacts from a model. Prefers Requirements Toolbox (.slreqx) when available; falls back to structured YAML.

The English summary is being prepared. Showing the original description.

Build motor control solutions using Motor Control Blockset for PMSM, induction motors, BLDC, and SynRM. Implement field oriented control, sensorless FOC, six-step control, speed control, current control, and torque control. Configure SVPWM, flux weakening, MTPA, MTPV, control of non-linear motors, inverter control, and motor parameter estimation. Compose motor drive models, tune gains, and generate embedded code.

The English summary is being prepared. Showing the original description.

Use this skill when the user asks to check Simulink model compliance against a standard (MISRA, MAB, JMAAB, ISO, DO, IEC, EN, CERT C/CWE, AUTOSAR, Simulink Code Inspector (SLCI)), wants to run Model Advisor checks, or needs a compliance report with fix suggestions. For JMAAB/MAB, supplement deterministic checks with agentic review of uncheckable guidelines.

The English summary is being prepared. Showing the original description.

Building or editing Simulink (.slx) models that stream signals in frames using DSP System Toolbox — audio, vibration, radar, comms. Use when the prompt names a Simulink block (Discrete FIR Filter, Buffer, Unbuffer, Rate Transition, Downsample, Upsample, Sample-Rate Converter, FIR Decimation, Time Scope, Spectrum Analyzer, From Multimedia File) or an action (frame-based processing, InputProcessing, buffering, overlap, windowing, STFT, short-time Fourier, decimate, downsample, upsample, resample, multirate, anti-aliasing, tunable filter). Prevents silent numerical errors from sample-vs-frame mismatch, wrong block choice, or missing anti-aliasing.

The English summary is being prepared. Showing the original description.

Use this skill when authoring, reworking, or validating a Classic AUTOSAR software component (SWC) in Simulink, including autosar.api mappings, runnables, timing events, sender-receiver ports, client-server operations, IRVs, BSW service callers, and component ARXML updates.

The English summary is being prepared. Showing the original description.

Find, show, open, or identify shipped MathWorks example models that demonstrate a concept, block, or application domain, and return the command to open them.

The English summary is being prepared. Showing the original description.

Synthesize new waveforms from scratch for Simulink inports using createInputDataset. Use ONLY when the user asks to generate, create, or synthesize signals (step, ramp, sine, chirp, pulse, noise) to populate a Dataset for External Inputs or Signal Editor. Covers timeseries and timetable formats with correct data type, interpolation, units, and dimensions. Also covers function-call and trigger inport timing setup. Do NOT use when the user wants to load, import, or read existing data from files (MAT, CSV, spreadsheet) — even if that data will be used as model input. Do NOT use for running simulations or plotting outputs.

The English summary is being prepared. Showing the original description.

Builds and edits Simulink, System Composer, Stateflow, and Simscape models. Use when modifying model structure, parameters, ports, connections, or Stateflow chart internals.

The English summary is being prepared. Showing the original description.

Import data into the Simulation Data Inspector (SDI) from MAT, CSV, or Excel files, from workspace variables, or from a Simulink simulation. Use when the user wants to view a logged file in SDI, load a bench-test log, or verify what a just-completed `Simulink.sdi.createRun` or `sim(model)` produced. Covers the `'file'`, `'vars'`, and `'namevalue'` sources of `createRun`, the auto-populate behavior after `sim()`, and post-import verification. Not for comparing existing runs (use `Simulink.sdi.compareRuns`); not for streaming data live during a running simulation (use `Simulink.sdi.createRunOrAddToStreamedRun` — a separate API); and not for authoring Gherkin or Simulink Test test cases, assertions, or regression tests (use `testing-simulink-models`). Do not activate on test-authoring or verification prompts even when no test-authoring skill is available — say so and stop.

The English summary is being prepared. Showing the original description.

Guide users through creating and managing .satk/block-policy.json for controlling which blocks the agent can use, which are excluded, and which block parameters the agent should not modify. Use when setting up block usage policy for a project.

The English summary is being prepared. Showing the original description.

Customize A2L (ASAP2) files generated from Simulink models using coder.asap2 and coder.mapping APIs. Use this skill when adding COMPU_METHODs, creating GROUPs, converting STD_AXIS to COM_AXIS, adding BIT_OPERATIONs, creating VARIANT_CODING, excluding measurements or struct elements, removing DEFAULT_EVENT_LIST, or any A2L customization for calibration tool compatibility (INCA, CANape). Also use when the user mentions ASAP2, ECU calibration data, A2L export.

The English summary is being prepared. Showing the original description.

Linearize Simulink models. Use when obtaining linear time invariant or linear parameter varying models from Simulink models.

The English summary is being prepared. Showing the original description.

Use this skill to run multiple Simulink simulations in parallel with parsim, batchsim, and DesignStudy. TRIGGER when: user asks for parameter sweep, sweeping/varying parameters across simulations, Monte Carlo study, batch simulation, running multiple simulations, parallel simulations, large-scale multiple simulations, any task involving repeated simulations with different parameter values, user mentions having an existing script/function for parameter sweeps, or user wants to migrate from parfor/set_param/for-loop patterns to recommended workflows.

The English summary is being prepared. Showing the original description.

Manages MATLAB projects for Simulink workflows: path management, file registration, labels, source control configuration, and project lifecycle. Use when creating projects, adding models/dictionaries/requirements to projects, configuring labels for automation, fixing broken model references, or setting up source control for Simulink artifacts.

The English summary is being prepared. Showing the original description.

Add, configure, and manage faults on Simulink, Simscape, and System Composer model signals for robustness analysis and safety validation. Use when injecting faults (stuck, noise, gain, offset) onto block inports/outports, enabling fault simulation, or analyzing fault effects. Covers sensor failures, signal corruptions, actuator faults, FMEA validation, and robustness testing. Requires Simulink Fault Analyzer.

The English summary is being prepared. Showing the original description.

Optimizes Simulink models for Embedded Coder generated code. Use when asked to optimize or improve generated code, or reduce code metrics for a Simulink model. Targets: execution time, memory footprint (RAM, ROM, stack, data copies), code size, MISRA compliance, or any semantically similar generated-code metric. Works iteratively — measures baseline, suggests changes, applies, and re-measures to confirm improvement. Triggers can be prompts similar to: optimize generated code runtime, reduce runtime, shrink code size, improve code efficiency, reduce memory usage, speed up generated code, follow MISRA compliance and so on. CAUTION: Do NOT attempt to optimize Simulink models for generated code efficiency without following this skill — the iterative measurement, gating, and rollback workflow is essential for safe optimization.

The English summary is being prepared. Showing the original description.

Use when a Simulink model is incompatible with Simulink Design Verifier (sldvcompat returns false, or an SLDV analysis errors out on an unsupported construct) and needs to be made analyzable. Diagnoses the incompatibility, applies the matching fix to a copy, and confirms the copy is compatible; optionally raises confidence the fix preserved behavior via a back-to-back consistency replay (agreement on the generated tests, not a proof of equivalence). Do NOT use for running test generation, design error detection, or requirement verification themselves — only for making a model compatible so those can proceed.

The English summary is being prepared. Showing the original description.

Configures Simulink simulations non-destructively using SimulationInput objects — parameter overrides without modifying the model, batch sweeps via parsim, custom input signals via Dataset, and simulation data retrieval via logsout. Use when running sim()/parsim() with setVariable, setBlockParameter, setExternalInput, or when performing parameter sweeps and multi-run analysis. Not needed for one-shot simulations without configuration.

The English summary is being prepared. Showing the original description.

Manage MATLAB packages with the in-product MATLAB Package Manager (mpm) on MATLAB R2026b or later: install, uninstall, update, search, or inspect packages; declare package dependencies in a matlab.toml project; install a shareable .mltbx package; or manage repositories. Covers dependency-resolution errors and anything involving mpminstall / mpmuninstall / mpmupdate / mpmlist / mpmsearch / mpmAddRepository / matlab.mpm.*. MATLAB *packages* are distinct from MathWorks products, toolboxes, and support packages: a bare "what packages are installed?" means MPM packages (mpmlist / matlab.mpm.Package) — this skill — unless the user explicitly says products, toolboxes, or support packages. NOT for installing MATLAB, Simulink, or toolboxes from a shell via the standalone mpm executable (the OS-level product installer), nor for listing installed products / toolboxes (ver, installedAddons) — use matlab-install-products for those.

The English summary is being prepared. Showing the original description.

Use whenever "project" or "matlab.toml" is mentioned in a MATLAB context. This includes creating, editing, organizing, or configuring MATLAB projects, declaring MATLAB package dependencies or reference projects, setting up paths, lifecycle scripts, shortcuts, MATLAB packages, or asking about project structure.

The English summary is being prepared. Showing the original description.

Set up and run wireless network simulations using the Wireless Network Toolbox. Use this skill when creating system-level simulations with wirelessNetworkSimulator, adding traffic sources (networkTrafficOnOff, networkTrafficFTP, networkTrafficVoIP, networkTrafficVideoConference), configuring node mobility, logging events or IQ samples, visualizing traffic, scheduling actions during simulation, running parametric sweeps, writing PCAP files with pcapWriter or technology-specific PCAP writers, registering event callbacks on wireless nodes, accessing event data fields, or combining multiple capture/visualization tools in a simulation.

The English summary is being prepared. Showing the original description.

Transmit and capture RF waveforms using Wireless Testbench with NI USRP radios (X410, X310, N310, N320, N321, N300, X300, E320). Use when generating test signals, transmitting over the air, capturing IQ data, performing loopback tests, configuring multi-antenna setups, or troubleshooting dropped samples and gain settings. Covers basebandTransceiver, basebandTransmitter, basebandReceiver, continuous and once transmit modes, foreground and background capture, and UseRadioBuffer options. Also use when the user mentions transmit waveform, capture signal, IQ data, loopback, RF gain, sample rate, or antenna configuration.

The English summary is being prepared. Showing the original description.