lite-screenshots

A reviewer reading a CSS diff cannot see the result. This captures the Lite UI with the branch applied and again with it unapplied, and posts the surfaces that differ to the pull request.

Capture runs on this machine, not in CI. It was tried in CI and abandoned: under the bare X server on the Linux runners this Electron build paints a frame on load and not reliably afterwards, so several surfaces hung indefinitely whether the capture went through Playwright or the DevTools protocol. The same spec passes here. The CI workflow only leaves a reminder.

Before capturing: is the surface covered?

Work this out first, by reading the diff — not by capturing and inferring it from the result. A run that reports "8 surfaces, 0 changed" looks identical whether the change is invisible or whether nothing looked at it.

1. Identify which screen the change affects.

2. Check it against the catalogue in apps/lite/e2e/tests/screenshots.spec.ts (currently: workspace sidebar, diff pane, branches tab, upstream tab, project picker, uncommitted rows, commit form, settings).

3. Covered — capture, as below.

4. Not covered — stop and ask the developer, offering the two lanes below. Either way it is their call, not one to make quietly inside a screenshot request. Tell them which screen is uncovered and which fixture would reach it.

   • Add it to the catalogue when the gap is a screen — something anyone working nearby will change again. It edits a shared file and becomes permanent coverage for every later pull request. See "Extending the catalogue" below.
   • Capture it ad hoc when the gap is a state — a conflicted commit mid-resolution, an empty list, one specific dialog — that no future pull request is likely to want. Nothing shared changes and nothing is left behind. See "One-off capture" below.

   Prefer the catalogue when it is a close call. The ad-hoc lane photographs the change once and protects nothing afterwards, and a catalogue that stops growing makes every later request re-derive the same fixtures.

If they decline both, do not post a comment. A normal comment would report "N surfaces, 0 changed", which asserts the change is not visual when in truth it was never photographed. Say plainly that the affected screen is not in the catalogue and no screenshots were taken.

Changes the capture cannot see

Some diffs are invisible to this harness for reasons that have nothing to do with the change being non-visual. Rule these out before reading a "0 changed" result as an answer:

• Scrollbars and their gutter. macOS hides scrollbars unless a mouse is attached, and a styled ::-webkit-scrollbar does not override that — the scroller simply reserves no gutter. On a machine set to "When scrolling", any change to the track, thumb, gutter width, or a separator meeting the gutter captures identically on both sides. Set System Settings → Appearance → Show scroll bars → Always for the run, and say in the comment that you did.
• Hover, focus, and drag states are not entered by the spec.
• Anything behind a scroll position — surfaces are captured at the top.

Prerequisites

• cargo build -p but once, giving target/debug/but.
• The branch under test applied, and not yet merged — the base side comes from unapplying it. Check but status first.
• Run every capture through env -u ELECTRON_RUN_AS_NODE. An agent hosted inside VS Code (itself Electron) inherits ELECTRON_RUN_AS_NODE=1, which makes the Electron the test launches behave as plain Node. Every surface then fails with Error: Process failed to launch! and nothing says why — the binary is fine, and running it by hand from another shell works. Check with env | grep ELECTRON.

The flow

Run every command from the repository root.

1. Capture the branch as it stands

$ env -u ELECTRON_RUN_AS_NODE SCREENSHOT_OUT=head BUT=$PWD/target/debug/but \
    pnpm -F @gitbutler/lite test:e2e screenshots.spec.ts

Output lands in apps/lite/e2e/screenshots/head/ (gitignored).

2. Capture the base

$ but unapply <branch>
$ but status        # confirm the branch is gone from the workspace
$ env -u ELECTRON_RUN_AS_NODE SCREENSHOT_OUT=base BUT=$PWD/target/debug/but \
    pnpm -F @gitbutler/lite test:e2e screenshots.spec.ts
$ but apply <branch>

Check the unapply took effect. It silently does nothing on a stale id or an already-merged branch, and both runs then capture identical code — which looks exactly like "this change is not visual". If every pair matches in step 3, assume this went wrong before concluding anything about the change.

Re-apply immediately, before anything else can fail and leave the workspace short a branch.

Stacked branches take the whole stack down. but unapply on a branch that is part of a stack unapplies every branch in it, including ones this capture depends on — unapplying a stacked change also removes the spec, and the base run then has no tests to execute. Check but status first. When the branch is stacked, capture the base by reverting the change in the working tree instead:

1. Edit the changed files back to their pre-change state by hand.
2. Capture into base.
3. but discard <file-id> to restore the committed version.

Confirm the restore: the change must be back before anything else happens.

3. Select what changed

$ node apps/lite/e2e/compare-screenshots.mjs \
    apps/lite/e2e/screenshots/base \
    apps/lite/e2e/screenshots/head \
    /tmp/publish \
    "https://raw.githubusercontent.com/<owner>/<repo>/pr-screenshots/pr-<number>/<short-sha>" \
    /tmp/section.md

It prints total=, changed=, added=, stages only the differing pairs into /tmp/publish, and writes the comment body. Surfaces that did not change are byte-identical, so they are folded into a collapsed list rather than shown.

4. Publish the images

Images go on an orphan pr-screenshots branch, under pr-<number>/<short-sha>/. A per-commit directory matters: reusing one path lets GitHub's image proxy serve the previous run's screenshots from cache, which reads as "my change did nothing".

Write them with the git data API rather than a local clone. There is nothing to clone, nothing to clean up, and no local git writes — which agents are often not permitted to make outside the project, and which cannot touch the GitButler workspace by accident.

$ REPO=<owner>/<repo>; DIR=pr-<number>/<short-sha>
$ HEAD_SHA=$(gh api repos/$REPO/git/refs/heads/pr-screenshots --jq '.object.sha')
$ BASE_TREE=$(gh api repos/$REPO/git/commits/$HEAD_SHA --jq '.tree.sha')

# One blob per image. base64 must be stripped of newlines.
$ jq -n --rawfile c <(base64 -i /tmp/publish/<name>.png) \
      '{content: ($c | gsub("\n";"")), encoding: "base64"}' > /tmp/blob.json
$ BLOB=$(gh api -X POST repos/$REPO/git/blobs --input /tmp/blob.json --jq '.sha')

# One tree and one commit for all of them, then move the ref.
$ jq -n --arg t "$BASE_TREE" --arg b "$BLOB" --arg d "$DIR" '{base_tree: $t, tree: [
      {path: ($d + "/<name>.png"), mode: "100644", type: "blob", sha: $b}]}' > /tmp/tree.json
$ TREE=$(gh api -X POST repos/$REPO/git/trees --input /tmp/tree.json --jq '.sha')
$ jq -n --arg t "$TREE" --arg p "$HEAD_SHA" \
      '{message: "Screenshots for #<number>", tree: $t, parents: [$p]}' > /tmp/commit.json
$ COMMIT=$(gh api -X POST repos/$REPO/git/commits --input /tmp/commit.json --jq '.sha')
$ gh api -X PATCH repos/$REPO/git/refs/heads/pr-screenshots -f sha="$COMMIT"

When the branch does not exist yet, omit base_tree and parents, then create the ref with POST git/refs -f ref=refs/heads/pr-screenshots -f sha=$COMMIT.

Fetch one raw URL before posting. A comment full of broken images is worse than no comment, and the failure is invisible until someone opens the pull request:

$ curl -s -o /dev/null -w '%{http_code}\n' \
    https://raw.githubusercontent.com/<owner>/<repo>/pr-screenshots/<dir>/<name>.png

5. Post to the pull request

Upsert a single comment rather than stacking one per run — find a previous comment starting with <!-- lite-screenshots --> and PATCH it, else POST.

$ jq -Rs '{body: .}' /tmp/section.md > /tmp/payload.json
$ gh api "repos/<owner>/<repo>/issues/<number>/comments" --paginate \
    --jq 'map(select(.body | startswith("<!-- lite-screenshots -->"))) | first | .id // empty'
$ gh api -X PATCH "repos/<owner>/<repo>/issues/comments/<id>" --input /tmp/payload.json

Do not edit the pull request description: rewriting text a human owns risks clobbering their concurrent edits.

6. Add the label

screenshots is the record that they were posted. Add it once the comment is up, so the label says what is true:

$ gh pr edit <number> --remove-label "screenshots needed" --add-label "screenshots"

CI labels any pull request with CSS in it CSS, and asks one that touches Lite's for screenshots only if the change is visible; leave that label alone, it describes the diff. screenshots needed is one a human applies by hand when they do want them, and the command above clears it if it is there.

Only after a comment with images actually went up. A pull request labelled screenshots with none attached is worse than an unlabelled one — it tells a reviewer the change has been shown when it has not. If you declined to post (an uncovered surface, a capture that failed), leave the labels as they are.

Screenshots are asked for once per pull request and never again, so the label is final — a later push does not undo it, and a set posted here is not a claim about code pushed after it. Recapture when the surfaces move; the command above is idempotent either way.

If you ever post images that are not captures of the running app — a page rendered from the branch's CSS, say, when the harness cannot be run — label them as such in the comment and mark it <!-- lite-screenshots-replica --> instead. A reviewer assumes a screenshot is a photograph of the app; anything else has to say so, and the different marker keeps a later real run from overwriting it.

Before finishing

• Look at the images, do not just trust exit codes. A green run proves files were written, not that they show the surface.
• Confirm the workspace is whole: but status should show the branch applied and no stray uncommitted changes.

One-off capture

For a state the catalogue should not carry permanently. The run command filters by filename, so any spec whose name contains screenshots is picked up by the same command and writes into the same SCREENSHOT_OUT directory — the compare step cannot tell the difference.

Write apps/lite/e2e/tests/screenshots-adhoc.spec.ts, importing the shared helpers rather than copying them (every workaround in them was earned, and a copy loses the comments explaining why):

import { enabled, openProject, shoot } from "../screenshot-helpers.ts";
import { test } from "../test.ts";

test.describe("screenshots", () => {
	test.skip(!enabled, "set SCREENSHOT_OUT to capture screenshots");
	test.describe.configure({ timeout: 180_000 });
	test.use({ scenario: "project-in-single-branch-three-branch-stack.sh" });

	test("<surface>", async ({ appWindow }) => {
		await openProject(appWindow);
		// ...reach the state...
		await shoot(appWindow, "<surface-name>", "<selector>");
	});
});

The same fixture and selector rules as the catalogue apply — see below.

Then capture both sides as usual, and:

• Delete the file once the base run is done. It is untracked and not ignored, so left behind it shows up as a stray change in but status and eventually in someone's commit. The "confirm the workspace is whole" check at the end is what catches this.
• Say in the comment that the surface was captured ad hoc and is not covered going forward, so nobody reads it as a regression guarantee.

Never run the two specs in one command. The config sets fullyParallel, and the catalogue spec wipes SCREENSHOT_OUT in a beforeAll — run concurrently, that wipe lands in the middle of the ad-hoc capture and deletes it. What survives is a plausible-looking directory missing exactly the surface you were asked for.

The trailing argument is a substring match on the file path, so a bare screenshots selects the ad-hoc spec as well and puts you straight into that race. Name the file: screenshots.spec.ts for the catalogue, screenshots-adhoc for the ad-hoc spec. Steps 1 and 2 above already do.

Capture the ad-hoc surface alone, filtering to its filename, into its own output directory on each side:

$ env -u ELECTRON_RUN_AS_NODE SCREENSHOT_OUT=adhoc-head BUT=$PWD/target/debug/but \
    pnpm -F @gitbutler/lite test:e2e screenshots-adhoc

Its own directory also avoids inheriting stale PNGs from an earlier catalogue run, since only the catalogue spec cleans up after itself. Then compare adhoc-base against adhoc-head as in step 3.

When a change touches both a covered screen and an uncovered state, run the catalogue first and the ad-hoc spec second, in separate commands, pointing both at the same directory — that order is safe because only the first one wipes.

Extending the catalogue

Only after the developer has agreed (see the top of this document). Add the surface to apps/lite/e2e/tests/screenshots.spec.ts, then capture as usual — the same run proves the new surface works and shows the change. Coverage applies to every later pull request, not just this one.

test.describe("<area>", () => {
	test.use({ scenario: "<fixture>.sh" });

	test("<surface>", async ({ appWindow }) => {
		await openProject(appWindow);
		await goToTab(appWindow, "branches"); // when it lives on another tab
		await shoot(appWindow, "<surface-name>", "<selector>");
	});
});

• <surface-name> becomes the filename and the heading a reviewer reads: name it commit-form, not outline-panel-2.
• Only fixtures calling "$BUT" setup register a project; the rest leave the app on "Select a project." and every capture fails. Known good: project-in-single-branch-three-branch-stack.sh, project-with-remote-branches.sh, project-with-conflicting-commits.sh.
• If no fixture reaches the state, build it in the test — uncommitted writes files into testEnvironment.workdir/local-clone and reloads.
• Prefer a stable id for the clip (#outline-panel, #details-panel), else a CSS-module prefix or an ARIA hook. Never nth-child or a generated class.
• One screenshot per test, taken after a fresh load. This costs nothing here and keeps the spec usable if CI capture is ever revisited.

Out of scope

• Native context menus cannot be captured; they are OS windows.
• Dark mode is not covered — the harness seeds theme: "light".
• States needing a real remote or credentials cannot be fixtured.