KubeSphere ServiceMesh

Overview

Integrates Istio, Kiali, and Jaeger to provide traffic governance for microservices. They operate on Composed App (backed by applications.app.k8s.io). A Service is governed when it has the annotation servicemesh.kubesphere.io/enabled: "true" and belongs to a Composed App.

Defines two core CRDs:

• Strategy — grayscale release task (canary, blue-green, traffic mirroring)
• ServicePolicy — traffic management (load balancing, connection pools, circuit breaking, etc.) via Istio DestinationRule

Istio handles traffic routing, Kiali provides topology visualization, and Jaeger enables tracing.

Before You Start

Check if ServiceMesh is already installed:

kubectl get installplans.kubesphere.io servicemesh --ignore-not-found

If found, upgrading is supported — just select a newer version in Step 1.

Installation

Step 1: Detect and Select Version

ALL_VERSIONS=$(kubectl get extensionversions.kubesphere.io \
  -l kubesphere.io/extension-ref=servicemesh \
  -o jsonpath='{range .items[*]}{.spec.version}{"\n"}{end}' | sort -V)

LATEST_STABLE=$(echo "$ALL_VERSIONS" | grep -v -E 'alpha|beta|rc' | tail -1)
if [ -z "$LATEST_STABLE" ]; then
  LATEST_STABLE=$(echo "$ALL_VERSIONS" | tail -1)
fi

echo "Available versions:"
echo "$ALL_VERSIONS"
echo ""
echo "Latest stable: $LATEST_STABLE"

This sets ALL_VERSIONS and LATEST_STABLE. Use SELECTED_VERSION for the version chosen.

Use the question tool:

• $LATEST_STABLE (Recommended) — accept the auto-detected version
• (custom) — type a specific version; validate it against the printed list

Step 2: Detect and Select Clusters

CLUSTER_DATA=$(kubectl get clusters.cluster.kubesphere.io \
  -o jsonpath='{range .items[*]}{.metadata.name}{"\t"}{.status.conditions[?(@.type=="Ready")].status}{"\n"}{end}')

READY_CLUSTERS=$(echo "$CLUSTER_DATA" | awk -F'\t' '$2 == "True" {print $1}')
CLUSTER_COUNT=$(echo "$READY_CLUSTERS" | wc -l)

HOST_CLUSTER=$(kubectl get clusters.cluster.kubesphere.io \
  -l 'cluster-role.kubesphere.io/host' \
  -o jsonpath='{.items[0].metadata.name}' || echo "")

echo "Ready clusters:"
echo "$READY_CLUSTERS"
echo ""
echo "Cluster count: $CLUSTER_COUNT"
echo "Host cluster: $HOST_CLUSTER"

This sets READY_CLUSTERS, CLUSTER_COUNT, HOST_CLUSTER.

• 1 cluster → skip selection, auto-use it. Set TARGET_CLUSTERS="$HOST_CLUSTER"
• Multiple clusters → use question with multiple: true:
  • All clusters → TARGET_CLUSTERS="$READY_CLUSTERS"
  • Host cluster only → TARGET_CLUSTERS="$HOST_CLUSTER"
  • (custom) — validate each name against $READY_CLUSTERS

Step 3: Check gateway-api Compatibility

if kubectl get installplans.kubesphere.io gateway-api --ignore-not-found &>/dev/null; then
  GW_API_EXISTS=true
  echo "gateway-api InstallPlan exists → will set PILOT_ENABLE_GATEWAY_API=false"
else
  GW_API_EXISTS=false
  echo "gateway-api not found → no compatibility config needed"
fi

echo "GW_API_EXISTS=$GW_API_EXISTS"

If GW_API_EXISTS=true, the InstallPlan config will include PILOT_ENABLE_GATEWAY_API: "false" to avoid conflicts.

Step 4: Generate and Apply InstallPlan

./scripts/generate-installplan.sh "$SELECTED_VERSION" "$TARGET_CLUSTERS" "$GW_API_EXISTS"

This generates the YAML to /tmp/servicemesh-installplan.yaml, runs --dry-run=server, then prints the apply command.

For configurable extension values (tracing sampling rate, storage backend, credentials, etc.), see references/extension-values.md.

Apply it:

kubectl apply -f /tmp/servicemesh-installplan.yaml

Tell the user "Installing". Then ask if they want to check status. If yes:

./scripts/check-status.sh poll

Status Checking

Purpose	Command
Single snapshot	./scripts/check-status.sh quick
Wait until complete (5min timeout)	./scripts/check-status.sh poll

Logic:

• All Installed → ✓ success
• Any Failed → ✗ prints full status
• Timeout (300s) → ⚠ prints current status
• In progress → prints every 10s

Uninstallation

⚠ Always confirm with the user before proceeding.

Uninstall from all clusters

if ! kubectl get installplans.kubesphere.io servicemesh --ignore-not-found &>/dev/null; then
  echo "ServiceMesh is not installed."
  exit 0
fi

Confirm with the user, then delete:

kubectl delete installplans.kubesphere.io servicemesh --ignore-not-found

Verify cleanup:

./scripts/verify-uninstall.sh

Success criteria:

1. InstallPlan is deleted
2. No active ServiceMesh pods remain in extension-servicemesh

Uninstall from specific clusters

WARNING: Do NOT delete the InstallPlan. Only remove target clusters from the placement list.

Confirm which clusters to remove, compute remaining clusters, then patch:

kubectl patch installplans.kubesphere.io servicemesh --type='json' \
  -p='[{"op": "replace", "path": "/spec/clusterScheduling/placement/clusters", "value": ["<REMAINING_CLUSTER_1>", "<REMAINING_CLUSTER_2>"]}]'

Success: patch returns OK + removed clusters no longer in .status.clusterSchedulingStatuses.

Troubleshooting

All scenarios below assume the namespace of the Composed App is known. Set it as NAMESPACE before proceeding.

Prerequisites (common steps for all scenarios)

# 1. Check Composed App status and governance annotation
kubectl -n $NAMESPACE get applications.app.k8s.io -o yaml
#    Key things to verify:
#    - .status: health of composed components
#    - annotation servicemesh.kubesphere.io/enabled=true

# 2. Verify pods with the injection annotation actually have istio-proxy sidecar
kubectl -n $NAMESPACE get pods \
  -l 'app.kubernetes.io/name,app.kubernetes.io/version,app,version' \
  -o custom-columns='NAME:.metadata.name,APPLICATION:.metadata.labels.app\.kubernetes\.io/name,SHOULD_INJECT_ISTIO_PROXY:.metadata.annotations.sidecar\.istio\.io/inject,CONTAINERS:.spec.containers[*].name'

# 3. If sidecar missing, check istiod injection logs
kubectl logs -n extension-servicemesh -l app=istiod --tail=100

After completing the prerequisites, proceed to the specific scenario below.

Grayscale release task (Strategy) not working as expected

When asking the user for <strategy-name>, refer to it as "grayscale release task name", not "strategy name".

Data flow: Strategy → VirtualService → Istio Proxy Sidecar → traffic routing.

After prerequisites:

# 1. Check Strategy reconciliation status and events
kubectl -n $NAMESPACE describe strategies.servicemesh.kubesphere.io <strategy-name>

# 2. Check the VirtualService controlled by this Strategy (linked via label)
kubectl -n $NAMESPACE get virtualservice \
  -l "servicemesh.kubesphere.io/controlled-by-strategy=<strategy-name>" -o yaml

# The controller copies strategy.spec.template.spec to the VirtualService spec,
# injecting only route.destination.host, route.destination.port.number, and match.port.
# Compare key fields to verify sync:
#   spec.template.spec.hosts  ↔ spec.hosts
#   spec.template.spec.http   ↔ spec.http  (port/host injected by controller)
#   spec.template.spec.tcp    ↔ spec.tcp   (port/host injected by controller)
# When spec.governor is set, controller overrides all routes to 100% → governor version.
# If the VirtualService spec does not reflect the template, sync failed.

# 3. Verify actual workloads match the routing rules
# (e.g., if routing to version: v2, check pods with that label exist)
kubectl -n $NAMESPACE get pods -l "app=<app-name>,version=<target-version>"

# 4. Check controller-manager sync logs for errors (last 100 lines)
kubectl logs -n extension-servicemesh -l app=servicemesh-controller-manager \
  --tail=100 | grep -iE "(error|reconcile|strategy|<strategy-name>)"

Traffic Monitoring (Topology and metrics) shows no data

Before running commands, confirm with the user:

1. Whether there is actual traffic reaching the Composed App
2. Whether expanding the time range still shows no data

After prerequisites:

# Check servicemesh-apiserver logs for Kiali access errors
kubectl logs -n extension-servicemesh -l app=servicemesh-apiserver --tail=100
# Check Prometheus / whizard-agent-proxy (only one will exist)
kubectl get pods -n kubesphere-monitoring-system -l 'app.kubernetes.io/name in (prometheus, whizard-agent-proxy)'

Tracing shows no data

Before running commands, confirm with the user:

1. Whether there is actual traffic reaching the Composed App
2. Whether expanding the time range still shows no data

After prerequisites:

# Check servicemesh-apiserver logs for Jaeger query errors
kubectl logs -n extension-servicemesh -l app=servicemesh-apiserver --tail=100
# Check jaeger-query logs for storage backend connectivity
kubectl logs -n extension-servicemesh -l app.kubernetes.io/component=query --tail=100
# Check jaeger-collector logs for storage backend connectivity
kubectl logs -n extension-servicemesh -l app.kubernetes.io/component=collector --tail=100
# If backend.jaeger.storage.options.es.server-urls is the default, check opensearch
kubectl get pods -n kubesphere-logging-system -l 'app.kubernetes.io/name=opensearch-data'