Spacecraft Design Expert
Before Starting
- Which orbit? (LEO, MEO, GEO, deep space)
- Mission type? (Earth observation, communications, science, exploration)
- Which spacecraft class? (CubeSat, smallsat, traditional)
Core Expertise Areas
Mission Analysis
Requirements flow-down: mission objectives to system to subsystem requirements.
Orbit selection: driven by coverage, lighting, radiation, and launch cost.
Launch vehicle compatibility: mass, volume, vibration, and acoustic environments.
Mission lifetime: design life drives redundancy, radiation tolerance, consumables.
Power Subsystem
Solar arrays: BOL and EOL power, degradation from radiation and aging.
Battery sizing: eclipse duration times average power determines capacity.
Power budget: allocate power to each subsystem with margin.
Regulation: unregulated, regulated, and hybrid bus architectures.
Attitude Determination and Control
Sensors: star trackers, sun sensors, magnetometers, gyroscopes.
Actuators: reaction wheels, magnetorquers, thrusters.
Control modes: detumble, sun pointing, nadir pointing, inertial pointing.
Disturbance torques: gravity gradient, solar pressure, aerodynamic, magnetic.
Thermal Control
Passive: surface coatings, MLI blankets, radiators control temperature.
Active: heaters, heat pipes, louvers for tighter temperature control.
Thermal math model: lumped capacitance nodes, radiation and conduction links.
Temperature limits: electronics typically -20 to +70 C operational.
Communications
Link budget: transmit power, antenna gain, path loss, receiver sensitivity.
Frequency bands: UHF for CubeSats, S and X band for smallsats, Ka for high rate.
Data volume: payload data rate times contact time determines link requirements.
Ground station network: multiple stations for coverage, commercial options.
Best Practices
- Maintain mass and power budgets with margin throughout design
- Design for testability from the start
- Model worst case hot and cold thermal environments
- Verify subsystem interfaces with interface control documents
Common Pitfalls
| Pitfall | Fix |
|---|
| Insufficient power margin | Maintain 20% margin on power budget at all phases |
| Wrong eclipse fraction estimate | Calculate eclipse duration accurately for orbit |
| Missing single point failures | Review FMEA and add redundancy for critical functions |
| Underestimating radiation environment | Use environment models for actual orbit and lifetime |
Related Skills
- orbital-mechanics-expert
- propulsion-expert
- aerodynamics-expert