Skip to content
cccskills
FreePublished on GitHub

statics-expert

Expert-level statics covering equilibrium of rigid bodies, free body diagrams, trusses, frames, friction, centroids, and moments of inertia.

The English summary is being prepared. Showing the original description.

Run score Not tested

See how to install

Files included (2)

  • SKILL.md2.5 KB
  • .gitkeep0 B

SKILL.md (original)

Review the instructions the agent will receive before you install.

Statics Expert

Before Starting

  1. 2D or 3D problem?
  2. Rigid body or deformable body?
  3. Truss, frame, or machine?

Core Expertise Areas

Equilibrium

Conditions: sum of forces equals zero, sum of moments equals zero. 2D equilibrium: three equations, Fx = 0, Fy = 0, moment about any point = 0. 3D equilibrium: six equations, three force and three moment equations. Free body diagram: isolate body, show all external forces and moments. Support reactions: pin provides two force reactions, roller one, fixed provides all.

Trusses

Truss: two-force members connected at joints, loads only at joints. Method of joints: sum forces at each joint, two equations per joint. Method of sections: cut through up to three members, sum forces and moments. Zero force members: can be identified by inspection, simplify analysis. Determinacy: m + r = 2j for statically determinate truss.

Friction

Coulomb friction: F = mu times N, friction force proportional to normal force. Static vs kinetic: static coefficient larger than kinetic. Impending motion: maximum static friction just before sliding begins. Wedge friction: self-locking condition when friction angle exceeds wedge angle.

Centroids and Moments of Inertia

Centroid: geometric center, weighted average position of area or volume. Composite bodies: sum of component centroids weighted by area or volume. Second moment of area: I = integral of y squared dA, resists bending. Parallel axis theorem: I = Icm + A times d squared.

Best Practices

  • Always draw a complete free body diagram before writing equations
  • Choose moment point to eliminate unknown forces and simplify solution
  • Check solution by summing forces in direction not yet used
  • Verify truss determinacy before attempting analysis

Common Pitfalls

PitfallFix
Incomplete free body diagramIdentify and include all contact forces and applied loads
Wrong sign conventionDefine positive directions clearly at start
Ignoring weight of membersInclude member weight unless stated massless
Moment sign errorUse right-hand rule consistently for 3D problems

Related Skills

  • dynamics-expert
  • mechanics-of-materials-expert
  • cad-design-expert

Reviews

No reviews yet. Tell others what you thought.

Comments

No login needed. Share how it worked for you, ask a question, or note where it did not run.

No comments yet. Be the first to write one.

Comments are published right away. Do not include personal information such as email addresses or phone numbers. Up to 2 URLs.

0 / 1,000 characters

This form is protected by reCAPTCHA, and the Google Privacy Policy and Terms of Service apply.

More skills from this repository

Expert-level abstract algebra knowledge. Use when working with groups, rings, fields, modules, Galois theory, representation theory, or algebraic structures. Also use when the user mentions 'group', 'ring', 'field', 'homomorphism', 'isomorphism', 'normal subgroup', 'quotient group', 'Sylow theorem', 'Galois theory', 'polynomial ring', 'ideal', 'module', 'vector space', or 'representation theory'.

The English summary is being prepared. Showing the original description.

luokai0/ai-agent-skills-by-luo-kai13Updated May 6, 2026

Expert-level acoustics knowledge. Use when working with sound waves, acoustic propagation, resonance, standing waves, Doppler effect, room acoustics, ultrasound, noise control, musical acoustics, or architectural acoustics. Also use when the user mentions 'sound wave', 'decibel', 'frequency', 'resonance', 'standing wave', 'Doppler effect', 'acoustic impedance', 'reverberation', 'ultrasound', 'noise control', 'harmonics', or 'sound intensity'.

The English summary is being prepared. Showing the original description.

luokai0/ai-agent-skills-by-luo-kai13Updated May 6, 2026

Expert-level aerodynamics covering subsonic and supersonic flow, lift and drag, airfoil theory, boundary layers, compressible flow, and CFD methods.

The English summary is being prepared. Showing the original description.

luokai0/ai-agent-skills-by-luo-kai13Updated May 6, 2026

Expert-level air quality engineering covering pollutant sources, atmospheric dispersion, air quality standards, emission controls, and air quality modeling.

The English summary is being prepared. Showing the original description.

luokai0/ai-agent-skills-by-luo-kai13Updated May 6, 2026

Expert-level aircraft structures covering structural design philosophy, wing and fuselage analysis, fatigue and damage tolerance, composite structures, and certification.

The English summary is being prepared. Showing the original description.

luokai0/ai-agent-skills-by-luo-kai13Updated May 6, 2026

Expert-level algorithms and complexity theory covering sorting, searching, graph algorithms, dynamic programming, greedy algorithms, NP-completeness, and algorithm design paradigms.

The English summary is being prepared. Showing the original description.

luokai0/ai-agent-skills-by-luo-kai13Updated May 6, 2026

See all skills by luokai0

Report a problem with this skill