Read and modify MIKE+ model parameters via the mike-plus MCP server — inspect or change values in any model table (pipe Diameter/Manning in msm_Link, node levels in msm_Node, catchment properties in msm_Catchment, etc.). Use when an agent must identify a current parameter and change it before re-running. Requires MIKE+ + license; mutating tools must run on a copy.
The English summary is being prepared. Showing the original description.
See how to installReview the instructions the agent will receive before you install.
Reads and edits values in the MIKE+ model database tables (via mikeplus). This is the "edit the model" capability that sits between mike-model (overview) and mike-runner (execute).
mike_get_values — {sqlite, table, columns?, muids?} → current values. Read-only. Use to identify a parameter before changing it.mike_set_values — {sqlite, table, values, muids | all} → applies the change and returns before/after for the affected rows. Mutates the database.msm_Link — pipes/reaches: Diameter, Width, Height, Manning (Manning's M; higher = smoother), MaterialID, TypeNo.msm_Node — manholes/nodes: GroundLevel, InvertLevel, Diameter.msm_Catchment — catchments: area / imperviousness / runoff parameters.msm_Project — simulation setups (used by mike_run's simulation).mike_set_values writes to the database and mikeplus has no undo.muids to target specific elements; only set all=true when you truly mean every row.before/after (or a follow-up mike_get_values) before re-running.mike-compare).msm_BBoundary (TypeNo = 1; TSConnection = dfs0 path relative to the model folder, TimeseriesName = dfs0 item) — see mike-rain.mike_run and quantify the effect with mike_results_compare (mike-compare).mike_model_info / mike_get_values -> identify current parameter
mike_set_values -> change it (on the variant copy) -> before/after
mike_run -> new .res1d
mike_results_compare / mike_plot_compare -> against the baseline run
No reviews yet. Tell others what you thought.
No login needed. Share how it worked for you, ask a question, or note where it did not run.
No comments yet. Be the first to write one.
Record provenance for an Agentic MIKE+ step via the mike-plus MCP server — a manifest.json tying the model copy, inputs, edits, run QA status, result files and figures together, each file with a sha256. Use at the end of every run/compare/plot task (successful or failed) so the work can be audited, re-compared or reproduced later. No license required.
The English summary is being prepared. Showing the original description.
Compare two MIKE+ runs via the mike-plus MCP server — baseline vs scenario, before vs after a parameter edit — to say WHERE a change mattered and BY HOW MUCH (delta peak, delta volume, timing shift, RMSE/NSE) and to draw the overlay hydrograph. Use whenever two .res1d files of the same model exist or a re-run just finished. Comparing needs no license; producing the second run does.
The English summary is being prepared. Showing the original description.
Standard operating procedure for an auditable, headless MIKE+ workflow via the mike-plus MCP server — how to plan, copy, run, QA-gate, compare, plot, audit, and safely stop. Use FIRST whenever an agent is handed a MIKE+ model (.sqlite) or result (.res1d) plus a plain-language goal; it picks the operating mode and tells the agent which mike-* skill to open next and in what order.
The English summary is being prepared. Showing the original description.
Bring an EPA SWMM (.inp) or EPANET (.inp) model into MIKE+ via the mike-plus MCP server — the bridge from an INP builder such as SWMMCanada or agentic-swmm into a MIKE+ database that mike_model_info / mike_run can use. Use when the user has an .inp and wants it in MIKE+. Requires MIKE+ installed + a checked-out license (demo mode caps the model size).
The English summary is being prepared. Showing the original description.
Inspect a MIKE+ .sqlite model via the mike-plus MCP server — active simulation/scenario/model type, unit system, the list of simulation setups and scenarios, element counts — and switch the active scenario. Use when an agent needs to understand a MIKE+ model before running or editing it, or must run a scenario prepared in the GUI. Requires MIKE+ installed + a license.
The English summary is being prepared. Showing the original description.
Produce publication-style figures from MIKE+ .res1d results via the mike-plus MCP server — a stacked rainfall-runoff hydrograph, a single time series, a network map, a baseline-vs-scenario overlay, or a longitudinal profile (bed / crown / ground / max water level along a pipe string), in the house style (Arial 12, ticks inward, SI units, no title). Use when an agent must render MIKE+ results as a PNG without opening the GUI. No license required.
The English summary is being prepared. Showing the original description.