Ringi

Identifies differential m6A methylation between conditions from MeRIP-seq paired IP/input data using exomePeak2 (GC-bias-aware differential via its bam_ip/bam_input control + bam_treated_ip/bam_treated_input treatment arms), QNB beta-binomial, MeTDiff HMM, and RADAR, plus the paired-symmetric edgeR/DESeq2-on-peak-counts route when batch/lot covariates need fixed-effect handling that exomePeak2's API does not accept. Covers paired vs unpaired vs interaction designs, batch confounding and per-lot meta-analysis, the stoichiometry-vs-expression-vs-IP-efficiency confound, and effect-size filtering against under-powered N=2 designs. Use when comparing m6A across two or more conditions, choosing between exomePeak2/QNB/RADAR/MeTDiff for a design, handling batch confounding when exomePeak2's API is too rigid, distinguishing real hyper/hypo-methylation from expression shifts, applying effect-size thresholds, or planning orthogonal stoichiometry validation (GLORI/SAC-seq/m6Anet mod_ratio).

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Calls m6A peaks from MeRIP-seq / m6A-seq paired IP-vs-input data using exomePeak2 (transcript-aware, GC-bias-corrected Poisson GLM), MeTPeak (HMM over sliding windows), MACS3/MACS2 with --nomodel --broad --keep-dup all (genome-wide broad alternative), and DRACH motif enrichment via HOMER or ggseqlogo as a sanity check (NOT a filter). Covers BED12 vs narrowPeak output, exonic vs intronic peak handling, multi-tool reconciliation (intersection vs union), the m6A-vs-m6Am ambiguity at 5'UTR peaks that antibody methods cannot resolve, and orthogonal validation (miCLIP/GLORI/m6A-SAC-seq/m6Anet). Use when calling peaks from paired IP/input genome BAMs, choosing exomePeak2 (transcript-aware default) vs MACS3 (broad genomic) vs MeTPeak (HMM-smoothed low-coverage), confirming DRACH enrichment as a sanity check on the peak set, reconciling differing peak sets across tools, validating MeRIP peaks against single-base methods, interpreting 5' peaks where m6Am contamination is possible, or recommending a consensus strategy.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Unsupervised clustering and cell-type identification for high-dimensional flow, spectral, and mass cytometry - FlowSOM, PhenoGraph, FlowSOM-via-CATALYST, with UMAP/tSNE for visualization. Covers the type-vs-state marker distinction (cluster on lineage, test state within clusters), over-provision-then-metacluster, the Weber-Robinson benchmark, seed dependence and metacluster stability, why embeddings are for looking not measuring, and median-heatmap annotation/merging. Use when discovering populations without predefined gates, choosing a clustering algorithm, selecting the number of metaclusters, or annotating clusters into cell types.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Corrects fluorophore spillover (conventional compensation) or spectral overlap (spectral unmixing) and applies variance-stabilizing transforms (logicle/biexponential, arcsinh, log) for flow and mass cytometry. Covers spillover-matrix estimation from single-stain controls, AutoSpill, the spillover spreading matrix and why panel design (not compensation) bounds resolution, compensate-then-transform ordering, and arcsinh cofactor choice (5 for CyTOF, ~150 for fluorescence, per-channel via flowVS). Use when correcting spectral overlap, preparing data for gating/clustering, choosing logicle vs arcsinh, deciding a cofactor, or distinguishing compensation from spectral unmixing.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Bead-based signal normalization and cross-batch harmonization for CyTOF and high-parameter cytometry - EQ four-element bead normalization of instrument sensitivity drift (CATALYST normCytof, premessa), and reference-anchor cross-batch normalization (CytoNorm, per-cluster quantile splines). Covers the distinction between within-run drift correction and between-batch correction, the mandatory anchor/reference sample, why normalization is per-cluster with many quantiles, and the over-correction risk. Use when correcting CyTOF signal drift, harmonizing multi-batch or multi-site studies, or deciding whether to normalize data versus model batch in the design.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Normalizes and transforms RNA-seq count matrices for DE, visualization, clustering, and ML. Covers between-sample (TMM, TMMwsp, RLE/median-of-ratios, upper quartile), within-sample (TPM, FPKM/RPKM), variance-stabilizing (VST, rlog, log-CPM), GC-content correction (cqn, EDASeq), and single-cell (scran deconvolution, scanpy normalize_total). Encodes the composition-bias rationale, the "most genes not DE" assumption and its catastrophic failure modes (MYC amplification, apoptosis, viral host shutoff, prokaryotic stress), the "lengthScaledTPM is not TPM" naming trap, the "TPM is not for DE" rule, the blind=TRUE vs FALSE decision, ERCC spike-in normalization (SBN), and the single-cell zero-inflation breakdown of TMM/RLE. Use when choosing or applying normalization, debugging shifted-MA-plot diagnostics, handling zero-heavy single-cell data, or correcting GC bias.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Aligns and QCs methylated-RNA-immunoprecipitation (MeRIP / m6A-seq) IP and input libraries using STAR or HISAT2 splice-aware mapping, samtools sort/index, IP/input matched-pair tracking, antibody-lot metadata recording, replicate concordance via deepTools multiBamSummary + plotCorrelation, IP enrichment QC via plotFingerprint and per-transcript IP/input ratio distributions, library-complexity saturation curves via PreSeq, and the explicit do-NOT-deduplicate convention for standard non-UMI MeRIP. Use when preparing paired IP and input BAM files for exomePeak2 / MeTPeak / MACS3 peak calling, evaluating MeRIP replicate concordance and IP enrichment, deciding whether to deduplicate (standard MeRIP typically NOT), choosing genome-vs-transcriptome alignment for downstream peak vs m6Anet workflows, recording antibody clone and lot metadata for cross-batch reconciliation, detecting failed IPs via saturation curves and IP/input distribution shape, or generating IP-over-Input bigWig tracks for visualisation.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Controls error rates across thousands of simultaneous tests in genomics discovery using false-discovery-rate methods (Benjamini-Hochberg 1995; Benjamini-Yekutieli 2001 for arbitrary dependence; Storey q-value with pi0 estimation; local FDR; independent filtering Bourgon 2010; covariate-weighted FDR via IHW Ignatiadis 2016), plus family-wise error control (Bonferroni, Holm) and the GWAS genome-wide threshold. Covers the FDR-versus-FWER choice as the discovery-versus-confirmatory distinction, the dependence assumptions behind BH (PRDS) versus BY, pi0 estimation, the independent-filtering and false-coverage-rate traps, and reproducibility ranking via IDR (Li 2011). Use when correcting p-values from genome-wide tests, choosing between BH/BY/q-value/Bonferroni, setting an FDR threshold, applying IHW or independent filtering, or interpreting q-values. For confirmatory trials with few pre-specified endpoints (closed testing, graphical/gatekeeping), see clinical-biostatistics/multiplicity-graphical.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Differential abundance (DA) and differential state (DS) analysis for flow and mass cytometry - tests which cell populations change in frequency or marker expression between conditions using diffcyt (edgeR/voom/GLMM for DA, limma/LMM for DS), with cydar, CITRUS, and compositional methods (sccomp, scCODA, DCATS) as alternatives. Covers the sample-is-the-experimental-unit principle, design/contrast and mixed-model formulas, compositionality of cluster proportions, and FDR across clusters. Use when comparing populations between groups, choosing a DA method, handling paired/batch designs, or deciding whether compositional correction is needed.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Detects and removes doublets/aggregates from flow, spectral, and mass cytometry before clustering or quantification. Covers FSC-A vs FSC-H singlet discrimination (the Area-Height non-proportionality, not a 1D area gate), FSC-W/SSC width gating, CyTOF Gaussian discrimination parameters (Center/Offset/Width/Residual/Event_length) and DNA intercalator gating, and the residual heterotypic conjugates that survive scatter gating and masquerade as double-positive populations. Use when filtering aggregates before phenotyping, choosing a doublet method for flow vs CyTOF, or diagnosing a suspicious double-positive cluster.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Assigns pathogen lineages (SARS-CoV-2 Pangolin UShER mode; Nextclade clade + QC; pango-designation alias resolution) and tracks variant frequencies over time using Nextstrain (Augur + Auspice), wastewater deconvolution (Freyja, COJAC, alcov, lineagespot), lineage-fitness modelling (multinomial logistic), and recombinant detection (3SEQ, RDP4, Bolotie). Covers Pangolin pangolin-data and Nextclade dataset version pinning (mandatory; lineage-defining mutations change with dataset), Freyja barcode forward-only date constraint, ARTIC primer scheme churn (V3/V4/V4.1/V5.3.2/Midnight) with dropout regions, and recombinant X-prefix designation lag. Use when assigning Pango lineages and Nextclade clades to viral consensus sequences, building Nextstrain Augur surveillance pipelines, deconvolving wastewater into lineage frequencies with Freyja, tracking lineage frequencies over time, handling ARTIC primer dropouts, or running surveillance for SARS-CoV-2/influenza/Mpox/RSV/H5N1/measles.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Structures biological experiments so inference is valid by construction, covering Fisher's principles (randomization, replication, local control), the experimental-vs-observational unit distinction and pseudoreplication (Hurlbert 1984; Lazic 2018), randomization mechanics (complete, restricted, stratified, rerandomization, run-order), blocking layouts (randomized complete block, Latin square, incomplete block), factorial designs and interactions, and the split-plot/nested error strata hidden inside multi-batch genomics. Use when deciding the experimental unit and what counts as a replicate, planning randomization and run order, choosing a blocked/factorial/split-plot/nested layout, avoiding pseudoreplication in cell-culture or animal studies, or specifying the random-effects structure of the analysis model. For assigning samples to sequencing batches/lanes/plates and batch-effect correction see experimental-design/batch-design; for regulated clinical-trial randomization see clinical-biostatistics.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Aligns sample metadata with count matrices and constructs design matrices for downstream DE, handling the alphabetical-reference-level trap (relevel BEFORE DESeq), LRT reduced-model rules, the interaction-term resultsNames trap, continuous-covariate scaling and splines, repeated measures via duplicateCorrelation or dream, high-cardinality categorical pseudo-singular designs, sample swap detection via XIST/RPS4Y1 expression and somalier/NGSCheckMate genotypes, SABV (sex-as-biological-variable) mandate, Simpson's-paradox collapsing of technical replicates, and the `~ 0 + group` parameterization for clean contrasts. Use when building a design matrix, troubleshooting reversed fold-change direction, encoding paired or repeated-measures designs, detecting sample swaps, deciding sex-as-covariate, or aggregating technical replicates.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Detects m6A modifications from Oxford Nanopore direct-RNA-seq (DRS) signal using m6Anet (multiple-instance-learning over DRACH 5-mer signal). Covers the upstream pipeline (Dorado/Guppy basecalling -> minimap2 map-ont -> nanopolish eventalign -> m6anet dataprep -> m6anet inference), per-site vs per-read probability including the mod_ratio stoichiometry column, the DRACH-only constraint, minimum-coverage thresholds (20-50 reads/site), multi-condition comparison via xPore/Nanocompore/ELIGOS, Dorado native modification calling (RNA004, 2024+), and the cDNA-vs-DRS distinction (cDNA Nanopore CANNOT detect modifications). Use when calling m6A from ONT DRS without immunoprecipitation, choosing m6Anet vs xPore vs Nanocompore vs ELIGOS vs Dorado native, interpreting probability_modified vs mod_ratio vs per-read probabilities, deciding between m6Anet (known DRACH sites) and Dorado/Remora (genome-wide screening), pinning RNA002 vs RNA004 chemistry and basecaller versions, or troubleshooting eventalign/dataprep failures.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Build UpSet plots to visualize set intersections beyond 4 sets (where Venn fails) using ComplexUpset (modern, ggplot2-grammar) or the unmaintained UpSetR, with explicit cardinality vs degree sorting, attribute panels, and query highlighting. Use when comparing overlap across many gene sets, peak sets, variant lists, or any set membership matrix where Venn diagrams become illegible.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Build sequence logos from aligned DNA, RNA, or protein motifs using ggseqlogo (R), Logomaker (Python), or WebLogo with explicit bits vs probability encoding, background-frequency correction, custom alphabets, and multi-logo stacking. Use when visualizing motif PWMs (TF binding, splice sites, CRISPR spacers), aligned-position composition, or comparing two motif sets.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Handles batch effects in bulk RNA-seq via design-matrix inclusion (the correct path for DE), ComBat/ComBat-seq for visualization, SVA for unknown latent factors, RUVSeq for negative-control-gene-anchored unwanted variation, and limma::removeBatchEffect for plotting only. Encodes the Nygaard 2016 cardinal sin against testing on a batch-corrected matrix, the choice between SVA/RUVg/RUVs/RUVr, the confounding non-identifiability problem, the single-cell boundary (Harmony/MNN are NOT for bulk), and the Goh 2017 harmonization critique. Use when designing a DE analysis with batch structure, troubleshooting batch-dominated PCA, choosing ComBat vs ComBat-seq, handling unknown batch via SVA, integrating across studies, or deciding when (rarely) to subtract batch.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Visualize biological networks (PPI, gene-regulatory, co-expression, pathway) with layout algorithm choice (ForceAtlas2, Fruchterman-Reingold, Kamada-Kawai, hive plots), edge bundling, community-based coloring, and reproducible seeds using NetworkX, PyVis, igraph, and Cytoscape automation. Use when rendering biological networks for static publication, interactive HTML exploration, or Cytoscape-format export.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Build publication-quality figures with matplotlib using the object-oriented Figure/Axes API, constrained_layout, rcParams customization, TrueType (Type-42) font embedding for journal submission, and CVD-safe palettes. Covers seaborn integration, common chart types, axis formatting, and the small gotchas that distinguish reproducible matplotlib from notebook scratch. Use when producing publication figures in Python — RNA-seq scatter, single-cell embeddings, generic biological plotting.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Build OncoPrint and co-mutation matrix plots from somatic-variant cohorts using ComplexHeatmap, maftools, and comut.py with alteration-type stacking, sample ordering by mutational burden, mutual-exclusivity overlays, and clinical annotation tracks. Use when visualizing per-sample mutation patterns across recurrent driver genes, comparing alteration classes, or identifying mutually-exclusive / co-occurring driver pairs.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Extracts, filters, annotates, and exports differential expression results from DESeq2 or edgeR with proper handling of padj=NA (independent filtering, Cook's outliers, all-zero), multiple-testing correction choice (BH vs Storey q-value vs IHW vs lfsr), TREAT vs post-hoc fold-change filtering, p-value histogram diagnostics, gene annotation via org.db/biomaRt/mygene, GSEA preranked input, ORA background construction, replication reality (Schurch 2016 small-n result), and SABV/sex-stratified reporting. Use when extracting and interpreting DE results, troubleshooting padj=NA, choosing FDR method, preparing ranked lists for pathway analysis, annotating gene IDs, or comparing DESeq2 vs edgeR outputs.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Build interactive HTML/web visualizations with plotly (Python/R), bokeh (Python), and gganimate/plotly frames for animation, with awareness of current Kaleido static-export model (post-orca-EOL), HTML file-size bloat, and the limits of interactive-only output for journal submission. Use when producing zoomable/hoverable plots for notebook EDA, supplementary HTML, dashboards, or animated time-course / iteration visualizations.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Build publication-quality figures in R with ggplot2 using the grammar of graphics (data + aesthetics + geometries + scales + facets + themes) with CVD-safe palettes, cairo_pdf TrueType embedding, programmatic aes via tidy evaluation, and the theme_classic publication baseline. Use when producing static figures in R for papers, presentations, or reports.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Plot per-gene mutation distributions on a protein-domain map (lollipop / needle plots) showing mutation position, recurrence count, and variant classification with maftools, g3-lollipop, trackViewer, and ProteinPaint. Use when visualizing recurrent mutation hotspots on a single gene's protein, marking domain boundaries from UniProt/Pfam, comparing missense vs truncating distributions, or contrasting two cohorts on the same lollipop.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.