본문으로 건너뛰기
cccskills

Zhanran Wang

@zrwangems

Master's student at Beihang University (Transportation). Focus: EREV energy management, RL, intelligent optimization, learning-based control.

스킬 300개저장소 1개 2

스킬(300)

검색에서 좁히기

Discovers connected MATLAB-supported hardware devices, searches by capability, and checks required support packages and add-ons. Use when the user asks what hardware is connected, finds a device that supports a capability (e.g., CAN, analog input), or checks if required support packages or add-ons are installed. Does NOT connect to, configure, or acquire data from devices — defers to device-specific skills for usage workflows.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

zrwangems/dsh-zrwang-plugin22026년 11월 16일 업데이트

Set up and verify a connection to an NI USRP radio (USRP E320, N300, N310, N320, N321, X300, X310, or X410) using Wireless Testbench. Use when connecting a USRP for the first time, configuring radio hardware, troubleshooting connection failures, or verifying a radio setup. Covers host inspection (OS, NIC type/speed/MTU), device discovery (findsdru, probesdru), UHD version checking, programmatic radio configuration, and basebandTransceiver verification. Also use when the user mentions USRP setup, radio not found, connection errors, dropped samples, or network configuration for SDR hardware.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

zrwangems/dsh-zrwang-plugin22026년 11월 16일 업데이트

Optimize RF PCB dimensions for bandwidth, return loss, or area via patternsearch and surrogateopt with constraints. TRIGGER: user asks to optimize an RF PCB component for performance (bandwidth, return loss, insertion loss, area) or apply constraints to a design. Invoke BEFORE writing optimization code — RF PCB Toolbox has a built-in optimize() function that differs from generic fmincon/ga approaches. SKIP: designing a component from scratch without an optimization objective (use the specific matlab-design-pcb-* skill), EM analysis without optimization (use matlab-analyze-em), material/stackup setup only (use matlab-manage-pcb-material).

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

zrwangems/dsh-zrwang-plugin22026년 11월 16일 업데이트

Use whenever a MATLAB robot model (rigidBodyTree) is needed — whether for simulation, visualization, IK, motion planning, pick-and-place, or trajectory generation. Triggers on: any mention of a manipulator by name (UR3, UR5, UR5e, UR10, UR10e, UR16e, UR20, KUKA iiwa, Fanuc, ABB, Panda, Kinova, Sawyer, Baxter), robot modeling verbs (load, create, build, import, simulate, model), tasks implying a robot model (pick, place, lift, reach, move, grasp, plan motion for, animate), kinematics keywords (IK, FK, inverse kinematics, forward kinematics, joint configuration, end-effector pose, gripper), or working with rigidBodyTree, loadrobot, importrobot, URDF, DH parameters, addVisual, addCollision.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

zrwangems/dsh-zrwang-plugin22026년 11월 16일 업데이트

Via modeling: pads, antipads, ground return vias, GRV placement, and signal integrity for high-speed layer transitions. TRIGGER: user asks to model a via, design a via transition, place ground return vias, analyze via performance, or check signal integrity through layer transitions. Invoke BEFORE writing code — only viaSingleEnded exists (no viaDifferential), and the location format is non-obvious. SKIP: general signal integrity without vias (use matlab-analyze-em), transmission line design (use matlab-design-pcb-transmission-line), PDN analysis (use matlab-analyze-pcb-pdn), material/stackup setup only (use matlab-manage-pcb-material).

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

zrwangems/dsh-zrwang-plugin22026년 11월 16일 업데이트

Cascade PCB components, add lumped elements, export Touchstone, and bridge to eye diagram or antenna array workflows. TRIGGER: user asks to cascade or connect multiple RF PCB components, add lumped R/L/C, export S-parameters to Touchstone, or combine PCB elements into a circuit. Invoke BEFORE writing pcbcascade or circuit code — cascade rules and port matching are non-obvious. SKIP: designing individual components (use the specific matlab-design-pcb-* skill), EM analysis of a single component (use matlab-analyze-em), material/stackup setup only (use matlab-manage-pcb-material), optimization (use matlab-optimize-pcb-design).

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

zrwangems/dsh-zrwang-plugin22026년 11월 16일 업데이트

Model a Phase-Locked Loop (PLL) IC from its datasheet or system specs using Mixed-Signal Blockset. Without this skill, agents universally select the wrong solver and produce non-functional PLL models — 100% of unguided attempts fail. Covers Integer-N, Fractional-N, Dual Modulus architectures, loop filter design, lock time optimization, VCO phase noise configuration, and msbPllArchitectures/msbPllFoundation block assembly. Use when: PLL modeling, frequency synthesizer design, phase noise simulation, lock time analysis, charge pump design, loop filter tuning, datasheet-to-model, Mixed-Signal Blockset PLL, msbPllArchitectures.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

zrwangems/dsh-zrwang-plugin22026년 11월 16일 업데이트

Computes multi-constellation Global Positioning System (GPS) or Global Navigation Satellite System (GNSS) positions from RINEX v3 data using rinexread, gnssmeasurements, receiverposition, and gnssoptions. Filters by constellation, elevation mask, C/N0, and observation code. Reports DOP, scatter RMS, and satellite count. Use when processing GNSS data, computing positions from RINEX files, analyzing accuracy, comparing constellations, or evaluating satellite geometry. Do NOT use for carrier-phase RTK/PPP, IMU fusion, orbit propagation, NMEA streaming, or RINEX v4.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

zrwangems/dsh-zrwang-plugin22026년 11월 16일 업데이트

Integrate antennas into RF systems using MATLAB Antenna Toolbox and RF Toolbox. Covers impedance matching network design (L/Pi/Tee topologies, evaluation parameters, Richards transformation), measured antenna creation (E-field, directivity-only, EmbeddedE, ffsReader import), RF propagation and site planning (txsite/rxsite, coverage, SINR, ray tracing, link budget), and SAR estimation (birdcage+Phantom, conformalArray+Custom3D, direct EHfields). Use when the user wants to match an antenna, create a measuredAntenna, compute coverage or signal strength, perform ray tracing, or estimate SAR.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

zrwangems/dsh-zrwang-plugin22026년 11월 16일 업데이트

Dielectric substrates, metal conductors, multi-layer stackups, and loss models (FR4, Rogers, Teflon) for RF PCB simulation. TRIGGER: user asks to set up a substrate, define dielectric properties, create a stackup, select a PCB material (FR4, Rogers, Teflon, etc.), or configure metal conductors. Invoke BEFORE writing dielectric() or metal() code — the API for named vs custom materials differs significantly. SKIP: PCB layout assembly (use matlab-assemble-pcb-layout), transmission line design (use matlab-design-pcb-transmission-line), EM analysis (use matlab-analyze-em), importing a PCB file (use matlab-read-pcb-layout).

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

zrwangems/dsh-zrwang-plugin22026년 11월 16일 업데이트

RF Toolbox and RF Blockset in MATLAB -- S-parameter I/O, network conversions (S/Z/Y/ABCD/T/H/G, mixed-mode), cascade/de-embedding, rfbudget analysis, circuit composition, matching networks, amplifier stability, mixer spurs, rational fitting, SI channels, baseband processing, Circuit Envelope simulation. Trigger: sparameters, Touchstone, .s2p, .s4p, rfplot, smithplot, rfparam, rfwrite, zparameters, yparameters, abcdparameters, s2sdd, cascadesparams, deembedsparams, rfbudget, noise figure, OIP3, IIP3, amplifier, modulator, nport, rffilter, attenuator, seriesRLC, shuntRLC, lcladder, txline, circuit, setports, clone, matchingnetwork, stabilityk, stabilitymu, powergain, gammams, gammaml, mixerIMT, OpenIF, rational, rationalfit, stepresp, txlineWRLGC, rf.Amplifier, rf.Mixer, rf.Filter, rf.Sparameter, rfsystem, RF Blockset.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

zrwangems/dsh-zrwang-plugin22026년 11월 16일 업데이트

Import Gerber, ODB++, Allegro .brd, .mcm files for PCB boards and IC packages. Inspect nets, layers, shapes, and stackups. TRIGGER: user asks to import, read, or open a PCB layout file. Gerber files use gerberRead or PCBReader; ODB++, Allegro .brd, .mcm, and native formats use pcbFileRead. Also when inspecting nets, layers, components, or stackups from an imported board. Invoke BEFORE writing import code — the query API (cadnet, cadnetList, componentList) is specialized. SKIP: EM analysis or S-parameter extraction (use matlab-analyze-em), PDN/IR-drop analysis (use matlab-analyze-pcb-pdn), building custom geometry (use matlab-assemble-pcb-layout), material/stackup definition only (use matlab-manage-pcb-material).

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

zrwangems/dsh-zrwang-plugin22026년 11월 16일 업데이트

Diagnose and fix parfor errors in MATLAB. Invoke this skill when the user has a parfor problem: "parfor loop has an error", "what's wrong with my parfor", "fix parfor", "unable to classify variable", "convert for to parfor", "parfor won't run", "sliced variable", "reduction variable", "variable classification". Also invoke when you read a .m file containing parfor and the user asks what's wrong, asks you to fix it, reports an error, or asks for review. Do NOT invoke for parfor performance questions or code that merely mentions parfor without a problem. ALWAYS use this skill instead of reasoning from training data — LLMs are frequently wrong about parfor classification rules.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

zrwangems/dsh-zrwang-plugin22026년 11월 16일 업데이트

Detect and validate GPU availability for MATLAB GPU computing. Use when the user can't use their GPU, or is setting up or selecting a GPU. Triggers on: gpuDevice, GPU setup, check GPU, GPU not found, GPU not working, can't use GPU, GPU not available, unable to find a supported GPU device, compatible GPU, canUseGPU, validateGPU.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

zrwangems/dsh-zrwang-plugin22026년 11월 16일 업데이트

Unified skill for all MATLAB and Simulink report generation tasks. Covers report generation, PDF report, document generation, mlreportgen, Report Generator, template, TitlePage, Chapter, multipage HTML, HTMLPage, html-multipage, custom reporter, customizeReporter, template hole, page header, page border, company style package, branded reporters, buildTemplates, Simulink report, model documentation, slreportgen, block diagram report, model report, subsystem documentation, SystemDiagramFinder, SystemIO, ExecutionOrder, LookupTable, template style, page footer, TemplateSrc, report package, table variants, multiple HTML pages, PDF report generation, Word report, DOM API, FormalTable, BaseTable, Figure, FormalImage, Section.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

zrwangems/dsh-zrwang-plugin22026년 11월 16일 업데이트

Design, select, and analyze waveforms for radar, sonar, and active sensing using the Phased Array System Toolbox. Covers LFM, NLFM, FMCW, phase-coded, CW, stepped FM, custom IQ, ambiguity functions, sidelobe reduction, and Doppler tolerance. Key objects: phased.LinearFMWaveform, phased.NonlinearFMWaveform, phased.CustomFMWaveform, phased.PhaseCodedWaveform, phased.FMCWWaveform, phased.SteppedFMWaveform, phased.MFSKWaveform, phased.RectangularWaveform, nlfmspec2freq, shapespectrum, ambgfun, pambgfun, sidelobelevel, legendreseq, mlseq, radarWaveformGenerator.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

zrwangems/dsh-zrwang-plugin22026년 11월 16일 업데이트

Discover MATLAB Parallel Computing Toolbox clusters on the network and in the cloud, and manage their profiles — list, inspect, import, export, set default, validate, and delete. Use whenever the user asks what parallel computing resources, clusters, or cluster profiles they have or can use — e.g. "what parallel resources do I have", "show my cluster profiles", "list clusters", "what clusters can I run on", "where can I submit jobs" — and for any work with parcluster, parallel.listProfiles, parallel.defaultProfile, MJS / Generic / HPC Server / MJSComputeCloud clusters, .mlsettings files, or profile validation. Does NOT cover job submission, parpool, or parfor.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

zrwangems/dsh-zrwang-plugin22026년 11월 16일 업데이트

Microstrip, stripline, CPW, differential pairs, and crosstalk analysis for impedance-controlled PCB interconnects. TRIGGER: user asks to design or analyze a transmission line (microstrip, stripline, CPW, coplanar, differential pair), extract RLGC or per-unit-length parameters, compute trace impedance, analyze a PCB trace cross-section, or perform crosstalk/coupling analysis. Invoke BEFORE writing code — preferred over RF Toolbox analytical functions (txlineMicrostrip, txlineStripline, txlineCPW). SKIP: EM simulation/S-parameter extraction of an existing component (use matlab-analyze-em), material/stackup definition only (use matlab-manage-pcb-material), building custom non-catalog geometry (use matlab-assemble-pcb-layout), optimization sweeps (use matlab-optimize-pcb-design).

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

zrwangems/dsh-zrwang-plugin22026년 11월 16일 업데이트

Perform time-frequency analysis in MATLAB using CWT, STFT, synchrosqueezing, reassignment, wavelet coherence, cross spectrogram, EMD/VMD, multiresolution analysis, and time-frequency filtering. Triggers on: time-frequency, spectrogram, scalogram, cwt, stft, istft, fsst, wsst, wcoherence, xspectrogram, modwt, modwtmra, modwpt, emd, vmd, hht, tffilt, dgt, gabor, instantaneous frequency, synchrosqueezing, reassignment, ridge extraction, wavelet coherence, cross spectrum, mode decomposition, signal decomposition, time-frequency filtering.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

zrwangems/dsh-zrwang-plugin22026년 11월 16일 업데이트

Build custom PCB structures with pcbComponent, shapes, Boolean ops, feeds, and multi-layer stackups for non-catalog geometries. TRIGGER: user asks to build, modify, or customize a pcbComponent — add/remove shapes, edit polygons, place feeds, add metal layers, cut slots, or create non-catalog RF structures. Also when modifying geometry of an existing catalog-designed component (e.g., adding pads, removing elements, editing vertices). Invoke BEFORE writing pcbComponent code — layer/shape/feed API is non-obvious. SKIP: designing catalog components like filters/couplers/txlines (use the specific matlab-design-pcb-* skill), material/stackup definition only (use matlab-manage-pcb-material), EM analysis (use matlab-analyze-em), importing PCB files (use matlab-read-pcb-layout).

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

zrwangems/dsh-zrwang-plugin22026년 11월 16일 업데이트

Launch and control the MATLAB Radar Designer app programmatically via MCP. Use when designing radar systems, configuring parameters, comparing radar types, analyzing performance metrics, or managing radar design sessions.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

zrwangems/dsh-zrwang-plugin22026년 11월 16일 업데이트

Use when designing a Digital Down Converter (DDC) using dsphdl System objects. Triggers on requests involving DDC design, frequency down-conversion for FPGA/ASIC, NCO + mixer + decimation filter chains, fractional/non-integer sample rate conversion, or HDL-optimized receiver front-end signal processing.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

zrwangems/dsh-zrwang-plugin22026년 11월 16일 업데이트

S-parameters, insertion loss, fields, currents, mesh control, and solver selection for RF PCB performance validation. TRIGGER: user asks to compute S-parameters, analyze insertion/return loss, extract fields or currents, compare MoM vs FEM, or control mesh for any RF PCB component. Invoke BEFORE writing sparameters() or solver code — API is non-obvious. SKIP: designing or creating components (use the specific matlab-design-pcb-* skill), material/stackup setup only (use matlab-manage-pcb-material), optimization sweeps (use matlab-optimize-pcb-design), PDN/IR-drop analysis (use matlab-analyze-pcb-pdn).

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

zrwangems/dsh-zrwang-plugin22026년 11월 16일 업데이트

Design antennas, arrays, and PCB antennas using MATLAB Antenna Toolbox. Covers catalog antenna design and pattern analysis, custom antenna construction (customAntenna + shape.*), PCB antenna design (pcbStack + antenna.*), finite and infinite array design, AI-accelerated design exploration (AIAntenna, patternFromAI), and optimization (SADEA/TR-SADEA). Use when the user wants to design, create, model, analyze, optimize, or fabricate an antenna or array.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

zrwangems/dsh-zrwang-plugin22026년 11월 16일 업데이트

본인 계정인가요? GitHub를 연동하면 크리에이터 페이지에 모을 수 있습니다 (일본어)