'simulation' 검색 결과

Synthesize new waveforms from scratch for Simulink inports using createInputDataset. Use ONLY when the user asks to generate, create, or synthesize signals (step, ramp, sine, chirp, pulse, noise) to populate a Dataset for External Inputs or Signal Editor. Covers timeseries and timetable formats with correct data type, interpolation, units, and dimensions. Also covers function-call and trigger inport timing setup. Do NOT use when the user wants to load, import, or read existing data from files (MAT, CSV, spreadsheet) — even if that data will be used as model input. Do NOT use for running simulations or plotting outputs.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Estimate frequency response from Simulink models using frestimate. Use when frequency response should be obtained from simulation rather than model linearization.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Add, configure, and manage faults on Simulink, Simscape, and System Composer model signals for robustness analysis and safety validation. Use when injecting faults (stuck, noise, gain, offset) onto block inports/outports, enabling fault simulation, or analyzing fault effects. Covers sensor failures, signal corruptions, actuator faults, FMEA validation, and robustness testing. Requires Simulink Fault Analyzer.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Specify plant models for closed-loop simulation: system specs, architecture, build plans, validation plans. Use when creating, updating, or reviewing plant model specifications, planning plant model architecture, or planning plant model validation.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Tests whether two genomic interval sets overlap (colocalize) more than expected by chance using a permutation test against a structured-genome null model. Covers bedtools fisher (analytic 2x2 screen), bedtools shuffle + jaccard permutation, GAT (isochore/GC-conditioned simulation with FDR), regioneR (flexible permutation, randomizeRegions vs circularRandomizeRegions, localZScore), LOLA (universe-relative Fisher against a region database), and GREAT/rGREAT (regulatory-domain binomial + hypergeometric for ontology-from-regions). Stresses the universe/background choice, matched background, blacklist exclusion, and multiple-testing control. Use when asking whether peaks/regions are enriched at enhancers/TFBS/features, scoring region-set colocalization or region-set enrichment, comparing CNV/SV concordance, or turning an overlap count into a defensible p-value.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Simulate transcription factor perturbation effects on cell state in silico with CellOracle and Dynamo, and predict transcriptional responses to genetic perturbations with GEARS, scGen, and CPA. Covers the direction-not-magnitude principle, local-linear validity, the GRN/velocity error it inherits, baseline discipline (mean and additive baselines), and the validation gap. Use when predicting TF knockout or overexpression effects, ranking driver TFs for fate transitions, or planning perturbation experiments. For GRN construction see multiomics-grn; for experimental Perturb-seq see single-cell/perturb-seq.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Build enhancer-driven gene regulatory networks (eGRNs) by integrating single-cell RNA-seq and ATAC-seq using SCENIC+, CellOracle base GRNs, Pando, FigR, DIRECT-NET, TRIPOD, and scMEGA. Covers the accessibility-defines-enhancers principle, peak-to-gene linking and its cell-composition confound, the paired-vs-unpaired decision, and TF-region-gene eRegulon triplets. Use when analyzing 10x multiome or paired/unpaired scRNA+scATAC to infer cis-regulatory GRNs. For RNA-only regulons see scenic-regulons; for in silico TF perturbation see perturbation-simulation.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Assesses genetic health of populations for conservation with Ne estimation across time horizons (LDNe NeEstimator V2 option-file API + SNeP physical-linkage correction; recent trajectory via GONE/GONE2; deep history via Stairway Plot 2 / dadi / fastsimcoal2 / PSMC), F-statistics, runs of homozygosity binned by length class to date inbreeding, genetic-load decomposition (Bertorelle 2022 realized vs masked), the modern 100/1000 Ne rule (Frankham 2014), Ne/Nc 2-6 orders of magnitude in marine fish (Hauser & Carvalho 2008), tree-sequence forward simulations (SLiM 4 + pyslim + tskit), and the Sukumaran-Knowles caveat against MSC methods for management-unit definition. Use when estimating Ne by time horizon, detecting inbreeding via F_ROH, decomposing genetic load, justifying conservation thresholds, distinguishing ESU/MU/DPS, configuring NeEstimator V2, or correcting LDNe physical linkage.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Use when the user mentions simulator testing, visual verification, push notification testing, location simulation, screenshot capture, OR live accessibility validation (VoiceOver announcements, Dynamic Type, ADA checks) on the simulator.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Manages iOS Simulator devices and app tests with xcrun simctl: lifecycle, install/launch, push and location simulation, privacy permissions, deep links, status-bar overrides, screenshots/video, log streaming, app containers, and targetEnvironment(simulator). Use when scripting Simulator workflows, debugging CoreSimulator boot failures, or deciding which hardware, performance, networking, memory-pressure, and security behaviors require a physical device.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Design a controlled dynamic-pricing or repricing system for ecommerce products. Use when a seller asks for demand-based, inventory-based, competitor-responsive, or time-based price rules; SKU eligibility; price floors and ceilings; automation approvals; simulations; monitoring; or rollback plans across Amazon, Shopify, TikTok Shop, Walmart, eBay, or other channels. Do not use for a one-time optimal-price calculation or to change live prices without explicit authorization.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Generate GNSS baseband waveforms (GPS, Galileo, NavIC) with physically realistic or user-specified channel impairments using the Satellite Communications Toolbox. Use when generating GPS L1 C/A, L1C, L2C, L5, Galileo E1, E1C, E5a, E5b, E5, or NavIC L5, S, L1 signals. Covers gpsWaveformGenerator, galileoWaveformGenerator, satelliteScenario, Doppler/delay from orbital dynamics or custom values, navigation data encoding with ephemeris, and RINEX integration. Triggers on: GPS waveform, Galileo waveform, NavIC waveform, GNSS signal, satellite scenario, GNSS simulation, receiver test signal, baseband GNSS, L-band satellite signal, navigation signal generation.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Generate standard-compliant IEEE 802.11 waveforms using MATLAB WLAN Toolbox. Use when creating WLAN waveforms, PPDU packets, or the transmit side of a link-level simulation. Covers all formats: Non-HT (802.11a/g), HT (802.11n), VHT (802.11ac), HE-SU/HE-MU/HE-TB (802.11ax), EHT-MU/EHT-TB (802.11be), UHR-MU/UHR-TB/UHR-ELR (802.11bn). Handles single-user, MU-MIMO, OFDMA, trigger-based uplink, extended range, preamble puncturing, UEQM, and DRU. Use when asked to generate test waveforms, create packets with MAC frames, configure OFDMA resource units, build trigger-based uplink transmissions, target a specific transmit duration, or build multi-packet waveforms.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Analyzes sensor configurations and creates inertial fusion filters in MATLAB Navigation Toolbox. Manages filter selection (imufilter, ahrsfilter, complementaryFilter, insfilterMARG, insfilterAsync, insfilterNonholonomic, insfilterErrorState, insEKF, insCF), construction, tuning, and fusion loops. Use when fusing IMU/AHRS/INS/GPS+IMU data, estimating orientation or pose, or choosing a filter. Do NOT use for vision-only SLAM, Simulink fusion, or IMU simulation.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Wilkinson, branchline, ratrace, directional couplers, corporate dividers, Rotman lenses for power splitting and beam-forming. TRIGGER: user asks to design, create, or analyze any coupler, splitter, power divider, combiner, or Rotman lens. Invoke BEFORE writing code — class names and design() availability vary per coupler type. SKIP: EM simulation/S-parameter extraction of an existing component (use matlab-analyze-em), building custom non-catalog geometry (use matlab-assemble-pcb-layout), material/stackup setup only (use matlab-manage-pcb-material), cascading multiple components (use matlab-integrate-pcb-circuit).

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Dielectric substrates, metal conductors, multi-layer stackups, and loss models (FR4, Rogers, Teflon) for RF PCB simulation. TRIGGER: user asks to set up a substrate, define dielectric properties, create a stackup, select a PCB material (FR4, Rogers, Teflon, etc.), or configure metal conductors. Invoke BEFORE writing dielectric() or metal() code — the API for named vs custom materials differs significantly. SKIP: PCB layout assembly (use matlab-assemble-pcb-layout), transmission line design (use matlab-design-pcb-transmission-line), EM analysis (use matlab-analyze-em), importing a PCB file (use matlab-read-pcb-layout).

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Read BEFORE writing any code that adds Additive White Gaussian Noise (AWGN) to signals and converts between SNR, Eb/No, Es/No, and per-subcarrier SNR for communications simulations, using awgn(), convertSNR(), berawgn(). The default MATLAB patterns for AWGN (e.g., 'measured' option, manual SNR formulas) produce subtly incorrect results. This skill specifies the correct calling conventions, required function usage, and critical anti-patterns that must be avoided.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Read BEFORE writing any code that builds or simulates OFDM systems. The default MATLAB patterns for OFDM (e.g., direct ifft/fft, awgn with 0 dBW power, missing symOffset) produce subtly incorrect results — always use ofdmmod/ofdmdemod instead of direct IFFT/FFT. This skill specifies the correct calling conventions for ofdmmod, ofdmdemod, ofdmChannelResponse, ofdmEqualize, and critical anti-patterns that must be avoided. Use when building OFDM transmitters or receivers, allocating subcarriers and guard bands, inserting pilots, computing SNR for OFDM, configuring fading channels (Rayleigh/Rician), estimating and equalizing channels, implementing timing and frequency synchronization, adding LDPC coding, designing resource grids, or setting up OFDM link simulations.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Microstrip, stripline, CPW, differential pairs, and crosstalk analysis for impedance-controlled PCB interconnects. TRIGGER: user asks to design or analyze a transmission line (microstrip, stripline, CPW, coplanar, differential pair), extract RLGC or per-unit-length parameters, compute trace impedance, analyze a PCB trace cross-section, or perform crosstalk/coupling analysis. Invoke BEFORE writing code — preferred over RF Toolbox analytical functions (txlineMicrostrip, txlineStripline, txlineCPW). SKIP: EM simulation/S-parameter extraction of an existing component (use matlab-analyze-em), material/stackup definition only (use matlab-manage-pcb-material), building custom non-catalog geometry (use matlab-assemble-pcb-layout), optimization sweeps (use matlab-optimize-pcb-design).

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Model a Phase-Locked Loop (PLL) IC from its datasheet or system specs using Mixed-Signal Blockset. Without this skill, agents universally select the wrong solver and produce non-functional PLL models — 100% of unguided attempts fail. Covers Integer-N, Fractional-N, Dual Modulus architectures, loop filter design, lock time optimization, VCO phase noise configuration, and msbPllArchitectures/msbPllFoundation block assembly. Use when: PLL modeling, frequency synthesizer design, phase noise simulation, lock time analysis, charge pump design, loop filter tuning, datasheet-to-model, Mixed-Signal Blockset PLL, msbPllArchitectures.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

RF Toolbox and RF Blockset in MATLAB -- S-parameter I/O, network conversions (S/Z/Y/ABCD/T/H/G, mixed-mode), cascade/de-embedding, rfbudget analysis, circuit composition, matching networks, amplifier stability, mixer spurs, rational fitting, SI channels, baseband processing, Circuit Envelope simulation. Trigger: sparameters, Touchstone, .s2p, .s4p, rfplot, smithplot, rfparam, rfwrite, zparameters, yparameters, abcdparameters, s2sdd, cascadesparams, deembedsparams, rfbudget, noise figure, OIP3, IIP3, amplifier, modulator, nport, rffilter, attenuator, seriesRLC, shuntRLC, lcladder, txline, circuit, setports, clone, matchingnetwork, stabilityk, stabilitymu, powergain, gammams, gammaml, mixerIMT, OpenIF, rational, rationalfit, stepresp, txlineWRLGC, rf.Amplifier, rf.Mixer, rf.Filter, rf.Sparameter, rfsystem, RF Blockset.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Bandpass, lowpass, bandstop filter design — hairpin, coupled-line, combline, stub, SIW for frequency selection and harmonic rejection. TRIGGER: user asks to design, create, or analyze any RF filter (bandpass, lowpass, highpass, bandstop, hairpin, coupled-line, combline, stub, SIW). Invoke BEFORE writing code — filter class names differ from what you would guess. SKIP: EM simulation/S-parameter extraction of an existing filter (use matlab-analyze-em), general PCB layout assembly (use matlab-assemble-pcb-layout), material/stackup setup only (use matlab-manage-pcb-material), optimization sweeps (use matlab-optimize-pcb-design).

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Use whenever a MATLAB robot model (rigidBodyTree) is needed — whether for simulation, visualization, IK, motion planning, pick-and-place, or trajectory generation. Triggers on: any mention of a manipulator by name (UR3, UR5, UR5e, UR10, UR10e, UR16e, UR20, KUKA iiwa, Fanuc, ABB, Panda, Kinova, Sawyer, Baxter), robot modeling verbs (load, create, build, import, simulate, model), tasks implying a robot model (pick, place, lift, reach, move, grasp, plan motion for, animate), kinematics keywords (IK, FK, inverse kinematics, forward kinematics, joint configuration, end-effector pose, gripper), or working with rigidBodyTree, loadrobot, importrobot, URDF, DH parameters, addVisual, addCollision.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Configure, simulate, debug, and analyze radarDataGenerator within radarScenario. Use for: interactively building radar detection scenarios from datasheets or performance requirements; diagnosing missed detections and configuration errors; interpreting sensor spherical, body, and scenario-frame outputs; deriving ReferenceRange from hardware specs via link budget; scan mode configuration (mechanical, electronic/AESA, hybrid); and validating simulation results against analytical predictions.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.