'esp' 검색 결과

Set up RuView sensing nodes by building and flashing ESP32 firmware, configuring WiFi and the receiving address, and checking serial logs. Diagnose missing CSI streams, the WiFi signal measurements sent by sensing nodes.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

• Setting up a new RuView sensing node
• Reflashing firmware for an 8 MB or 4 MB ESP32-S3
• Configuring WiFi and the receiving server

Understand KubeSphere architecture and call its APIs with a script that handles authentication. This skill also directs cluster, user, workspace, and extension management requests to the relevant specialist skills.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

• Understand KubeSphere core components
• Choose API paths for Kubernetes and KubeSphere operations
• Send API requests to a specific member cluster

Inspect KubeSphere clusters with read-only commands. List clusters, view detailed configuration, identify host and member roles, and review connection types, readiness indicators, and KubeSphere and Kubernetes versions without changing cluster resources.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

• List clusters registered in KubeSphere
• Check cluster readiness
• Review KubeSphere and Kubernetes versions

Audit GitHub Codespaces startup time and spending, then identify up to three evidence-based improvements to development containers, machine sizes, prebuilds, or idle timeouts, with validation results and expected impact.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

• Investigating slow Codespaces startup
• Reviewing Codespaces spending
• Trimming unused development container components

Set up an ESP32-S3/C6 sensing node for RuView by choosing firmware, checking and flashing binaries, and configuring WiFi and capture settings. Use boot logs to confirm CSI, measurements of the WiFi channel, is being captured.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

• Choosing firmware for an ESP32 board
• Flashing firmware after checksum verification
• Configuring WiFi, channels, and MAC filters

Operate KubeSphere DevOps pipelines within a permitted project using KubeSphere APIs and OAuth authentication. Create pipelines, run selected branches, monitor execution, and retrieve logs or build artifacts without requiring cluster administrator access or direct Jenkins access.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

• Creating pipelines within an authorized project
• Building a selected repository branch
• Checking run status, logs, and build artifacts

Manage KubeSphere’s Traefik-based Gateway API extension for external access to applications. Install, upgrade, or remove it across selected clusters, and inspect GatewayProxy resources, which manage proxy instances, to investigate deployment failures and unhealthy gateways.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

• Install or upgrade the extension on selected clusters
• Inspect GatewayProxy status by scope
• Investigate Traefik startup and update failures

Install, upgrade, and remove the ingress-nginx-based KubeSphere Gateway extension, which manages external access to applications. Inspect gateways across cluster, workspace, and project scopes, and investigate stalled operations, Helm installation failures, or pod problems.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

• Installing or upgrading the Gateway extension
• Checking gateways by cluster, workspace, or project
• Investigating stalled gateway operations and pod failures

Manage Fluid in KubeSphere with configuration files and commands for installation, data connections, caching, status checks, and troubleshooting. Prepare Dataset and runtime resources, preload data into cache, and adjust runtime replica counts.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

• Install or upgrade Fluid in KubeSphere
• Configure data connections and caching
• Preload data into cache with DataLoad

Manage NodeGroup resources in a KubeSphere environment, including creation, updates, and deletion. Bind or unbind nodes, namespaces, and workspaces, verify changes, and investigate synchronization problems or deployment settings using the bundled API script.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

• Inspecting and updating NodeGroup resources
• Binding nodes, namespaces, and workspaces
• Investigating synchronization failures

Manage KubeSphere’s network extension, from installation and upgrades to Calico IP address pools and traffic restrictions. Inspect live cluster resources and bundled references to configure namespace bindings, plan pool migrations, and verify changes.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

• Installing or upgrading the network extension
• Managing Calico IP pools and namespace bindings
• Checking allocations before an IP pool migration

Start using RuView by choosing a Docker demo, a source build, or a live ESP32 setup. The skill guides the next concrete step, distinguishing sample data playback from sensing an actual room with WiFi signals.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

• Trying the dashboard without sensing hardware
• Building and testing RuView from source
• Starting a live ESP32 room-sensing setup

Create reusable procedures for responding to security incidents, from detection and containment to recovery. Define decision points, responsibilities, escalation rules, and workflows for security automation platforms so teams can follow a consistent response process.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

• Establishing an incident response program
• Documenting phishing or ransomware response procedures
• Designing automated security response workflows

Configure ArgoCD in KubeSphere DevOps for GitOps, which keeps deployed applications aligned with configuration stored in Git. Covers application management, repository credentials, shared sign-in, multiple clusters, and troubleshooting synchronization problems.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

• Deploy applications from configuration stored in Git
• Create applications through the tenant API
• Configure shared sign-in through Dex

Manage users, team workspaces, and projects in KubeSphere through its API. Create accounts and resources, invite members, inspect existing access, and assign or change built-in permission roles with minimum access as the default.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

• Create user accounts with limited default access
• Create team workspaces and projects on selected clusters
• Invite members and assign built-in permission roles

Manage applications in KubeSphere, from Helm and YAML deployment templates to repository synchronization, version review, and publication. The skill also guides inspection of installed applications and troubleshooting of installation or upgrade issues.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

• Adding and synchronizing application repositories
• Reviewing and publishing application template versions
• Checking installed applications

Firmware development for the 38-pin ESP32-WROOM-32 development board — Espressif ESP32-DevKitC V4, Ai-Thinker NodeMCU-32S, DOIT ESP32 DevKit V1 38-pin and their CH340/CP2102 clones, 19 pins per side, with GPIO0 and the six in-package flash pins (GPIO6-11, labelled D0 D1 D2 D3 CMD CLK or SD0-SD3) broken out. Use when working on a 38-pin ESP32 devkit (ESP32-D0WDQ6 / ESP32-D0WD-V3, ESP-WROOM-32 or ESP32-WROVER module): project setup, platformio.ini and sdkconfig for ESP-IDF or Arduino, pin mapping and which GPIOs are safe, the flash-pin and IO0 traps, WROVER GPIO16/17 PSRAM conflict, strapping pins, ADC1 vs ADC2 with Wi-Fi, SPI speed and IO_MUX pins, deep sleep and RTC wake pins, flashing, BOOT/EN recovery, brownouts, or debugging why something on the board does not work.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Create and manage Volcano jobs and scheduling queues in KubeSphere. Use YAML templates for PyTorch, TensorFlow, MPI, and batch workloads, configure resource requests and execution policies, and investigate jobs that remain pending or fail to create pods.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

• Prepare distributed training jobs for PyTorch or TensorFlow
• Create MPI and batch processing jobs
• Configure queue capacity and scheduling weight

Set up distributed tracing in KubeSphere to follow requests across services. Covers extension installation, trace collection, automatic application instrumentation, and API queries for traces, individual processing steps, and service connections.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

• Set up distributed tracing in KubeSphere
• Configure automatic application instrumentation
• Query traces and service connections through the API

Set up and troubleshoot automated build, test, and deployment workflows in KubeSphere DevOps. Covers Jenkins integration, project management, multi-cluster installation, and ArgoCD integration for deployments managed through Git.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

• Set up build, test, and deployment pipelines
• Configure Jenkins integration
• Install DevOps across multiple clusters

Manage OpenKruise in KubeSphere, from extension installation to troubleshooting. Generate SidecarSet configuration for adding helper containers and CloneSet configuration for application updates, including in-place changes and staged rollouts, with commands to apply and verify each configuration.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

• Install OpenKruise and check its status
• Add and update helper containers with SidecarSet
• Stage application image updates with CloneSet

ESPHome device configuration, firmware, and IoT product development. Covers ESP32, ESP32-S3, ESP32-C3, ESP32-C6, ESP32-H2, ESP32-P4, ESP8266, RP2040, RP2350, nRF52, LibreTiny, Shelly, Sonoff, Tuya, BLE proxy, Matter firmware, Thread, Zigbee, GPIO, sensor YAML, LVGL displays, LED strips, voice assistant hardware, device flashing, Arduino conversion, alarm_control_panel, lock, valve, media_player, microphone, speaker, audio DAC, event entities, datetime entities, Z-Wave proxy, MIPI DSI displays, and DLMS smart meters. Also covers designing new ESPHome-based products: hardware selection, component sourcing, PCB design (KiCad), enclosures, 3D printing, CE/FCC certification, BOM optimization, and manufacturing from prototype to production scale.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Firmware development for the 30-pin ESP32-WROOM-32 development board — the DOIT ESP32 DevKit V1 / ESP32 CH340 Type-C / NodeMCU-ESP32 30-pin form factor, 15 pins per side, CH340G or CP2102 USB-UART bridge, AMS1117 LDO, user LED on GPIO2. Use when working on a 30-pin ESP32 devkit (ESP32-D0WDQ6 / ESP32-D0WD-V3, ESP-WROOM-32 module): project setup, platformio.ini and sdkconfig for ESP-IDF or Arduino, pin mapping and which GPIOs are safe, strapping pins, ADC1 vs ADC2 with Wi-Fi, SPI speed and IO_MUX pins, I2C, deep sleep and RTC wake pins, flashing over the CH340 bridge, BOOT/EN recovery, brownouts, or debugging why something on the board does not work.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Integrate RuView through shell commands, an HTTP API, or WebAssembly builds, which run compiled code in browsers and supported edge devices. Covers survivor scan commands, result exports, API hosting, and browser or ESP32 deployment paths.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

• Script survivor scans and export results
• Expose RuView sensing through HTTP
• Build RuView for browser use