본문으로 건너뛰기
cccskills
무료GitHub에 공개

sweep-reds

Repair confirmed failures in CI, the automated build and test process, starting with the base branch. Then prepare affected pull requests individually, recording checks for the exact code candidate and unresolved issues for owner review.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

원문원문 설명 보기

Repair confirmed CI failures base-first, then prepare affected PRs one at a time with exact-candidate evidence. Use when asked to sweep reds or restore the queue. Never merges, closes PRs, weakens tests, or changes CI under ordinary sweep authority.

설치 방법 보기

이럴 때 유용합니다

  • Reproduce and repair CI failures on the base branch
  • Investigate affected pull requests one at a time
  • Verify required checks for the exact code candidate
  • Hand prepared fixes and unresolved issues to the owner

포함된 파일(1)

  • SKILL.md3.4 KB

SKILL.md(원문)

설치하기 전에 에이전트에게 전달되는 지시 내용을 확인할 수 있습니다.

Sweep reds: base first, then affected PRs

Read ../_shared/base-green.md and ../_shared/validation-gate.md. Success means verified required checks, not a disappearing incident or green wrapper.

Boundaries

  • Never merge, close PRs or change release-freeze state through this skill.
  • Never stash, alter the shared checkout, or touch another session's active worktree.
  • Never weaken assertions, expand tolerances, suppress failures or raise a baseline to make a check green. A proven workflow defect requires an explicitly scoped gate-repair task; ordinary sweep authorization does not authorize CI mutation.
  • Run live credentialed/paid tests, deployment or trust approvals only with the appropriate owner authorization. Missing access is HOLD, not PASS.

A. Base health

  1. Resolve live main/release refs and freeze state read-only. Confirm the intended development branch; a frozen branch remains off limits.
  2. Follow the shared exact-SHA evidence protocol. Closed/missing incidents mean UNKNOWN unless current applicable executions establish PASS. A quick observer receipt is partial; the last incident comment is only a diagnostic worklist.
  3. Reproduce each signature on an isolated pinned base. Keep setup/install failures separate from assertions. Open one owned branch/worktree per independently reviewable repair, with RED-to-GREEN proof; avoid duplicating another session's PR.
  4. Prepare/babysit the fix PR under the authorized scope, then hand it to the owner. Do not claim the base is repaired until the fix is integrated and the new exact base passes. The authorized observer, not this skill, manages its incident.

B. PR queue

Inventory requested open PRs and their current head/base/candidate identities. Classify required failure, advisory failure, pending, stale, cancelled and approval needed separately. Work one PR at a time, checking ownership before each mutation.

An inherited label requires the same measured signature on the exact base, not membership in an old incident list. For stale evidence, obtain a newly constructed candidate under the current base; a rerun still uses the original run identity. Updating a contributor branch or approving a fork run needs its own authority.

An advisory check is nonblocking only if the current policy says so. Its failure may be a real product defect; advisory is not an infrastructure diagnosis. A PR with advisory failures is admissible only after all required applicable gates pass on the current candidate and the remaining risks are reported.

For proven PR defects use the /babysit repair discipline: RED, minimal fix, focused/affected suites and complete candidate validation. Preserve contributor credit. If five iterations do not converge, report the evidence and owner decision needed, then continue eligible independent items; never relabel failure as green.

Report

Record base and PR SHAs, failure signatures/counts, causal confidence, commits, run/attempt/artifact evidence, full versus partial validation and holds. Keep advisory debt visible. Hand the owner the prepared PRs and unresolved decisions; this skill never authorizes their merge.

리뷰

아직 리뷰가 없습니다. 사용해 본 소감을 남겨 주세요.

댓글

로그인 없이 쓸 수 있습니다. 사용 후기, 질문, 작동하지 않은 환경 등을 편하게 남겨 주세요.

아직 댓글이 없습니다. 첫 댓글을 남겨 보세요.

보내면 바로 공개됩니다. 이메일 주소나 전화번호 같은 개인 정보는 쓰지 마세요. URL은 2개까지입니다.

0 / 1,000자

이 양식은 reCAPTCHA로 보호되며 Google 개인정보처리방침 및 서비스 약관이 적용됩니다.

같은 저장소의 스킬

cli-a2a

무료

Use the command line to send tasks to OmniRoute's A2A server, which supports communication between agents. Inspect execution history and logs, monitor or cancel tasks, and interactively test the JSON-RPC 2.0 communication protocol.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

  • Check server status and available skills
  • Invoke a skill with JSON input
  • Inspect task history and logs
diegosouzapw/OmniRoute7.8만2026년 10월 18일 업데이트

Back up and restore OmniRoute data from the command line. Manage incremental snapshots, scheduled backups, encryption, and cloud synchronization, with options to compare differences and preview data transfers or imports before applying them.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

  • Create a backup before restoring data
  • Schedule recurring backups
  • Compare differences before cloud synchronization
diegosouzapw/OmniRoute7.8만2026년 10월 18일 업데이트

Submit groups of AI requests as batch jobs with the OmniRoute command line. Manage input files, monitor or cancel jobs, save results and errors, and incorporate batch processing into automated build and deployment workflows.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

  • Submitting AI requests from a JSONL file
  • Monitoring batch jobs and waiting for completion
  • Saving batch results and error details
diegosouzapw/OmniRoute7.8만2026년 10월 18일 업데이트

cli-chat

무료

Send prompts to LLMs from a terminal, display answers as they arrive, or hold an ongoing conversation. Use files or standard input for prompts, choose models, and set system instructions through OmniRoute.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

  • Sending a prompt from a terminal
  • Using file contents as a prompt
  • Displaying and saving streaming responses
diegosouzapw/OmniRoute7.8만2026년 10월 18일 업데이트

Configure prompt compression, which shortens text sent to AI models, through the OmniRoute command line. Adjust RTK filters, Caveman rules, and combined compression modes, then preview the results using real prompts.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

  • Preview compression results with real prompts
  • Adjust RTK filters and Caveman rules
  • Compare combined compression modes
diegosouzapw/OmniRoute7.8만2026년 10월 18일 업데이트

Manage OmniRoute context settings from the command line, including token budgets and RTK filters for processing context. Switch saved server connections, import or export configurations, and inspect or expire conversation sessions.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

  • Adjust context token budgets and filtering rules
  • Switch between saved server connections
  • Import or export connection settings as JSON
diegosouzapw/OmniRoute7.8만2026년 10월 18일 업데이트

diegosouzapw의 스킬 모두 보기

이 스킬의 문제 신고