본문으로 건너뛰기
cccskills
무료GitHub에 공개

trader-risk

Check proposed stock orders against configured limits for loss, reward versus risk, position size, trading hours, and account rules. Get a PASS or BLOCK with reasons recorded for the exact order before it can be shown for broker execution.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

원문원문 설명 보기

Risk Manager. Checks every trade against your limits and stops anything over them, before it can reach the broker. For a day trade: a stop is required, the loss at the stop must fit your max loss per trade (measured from the higher of the plan's entry and a fresh price), reward:risk must meet your minimum, the day's total risk must fit your daily loss limit, no more than your trades per day, and no new entries outside your entry window or when the market is closed. It also keeps the basics: blocked tickers, order size, position cap, cash buffer, margin, short sales, options and crypto, malformed or bad bracket orders, duplicates and a daily order limit. Getting out is never blocked by a day limit. Prints PASS or BLOCK with the reason and records the verdicts so trader-broker only shows an order that passed. Use when the user says "check my order", "is this safe", "risk check", "does this break my rules", "can I take this trade", "how much have I risked today", or before /trader-broker, always.

실행 점수 미검증

설치 방법 보기

이럴 때 유용합니다

  • Check whether a proposed order fits your trading limits
  • See how much of today’s loss limit a trade would use
  • Find why an order is blocked before broker execution

포함된 파일(2)

  • SKILL.md9.4 KB
  • check.py38.2 KB

SKILL.md(원문)

설치하기 전에 에이전트에게 전달되는 지시 내용을 확인할 수 있습니다.

trader-risk

The Risk Manager is the gate between a proposal and the broker. Every order written by trader-budget or trader-broker's flatten passes through it. A BLOCK is final for that order: it does not go to the user for a yes, and it does not go to the broker. Most people who day trade lose money. These limits keep each loss and each day's losses small. They do not make a trade win.

${CLAUDE_SKILL_DIR} below is this skill's folder (where this SKILL.md lives).

python3 "${CLAUDE_SKILL_DIR}/check.py"                           # trader/ files; writes trader/state/risk.json
python3 "${CLAUDE_SKILL_DIR}/check.py" --json
python3 "${CLAUDE_SKILL_DIR}/check.py" --no-write                # look without recording
python3 "${CLAUDE_SKILL_DIR}/check.py" --now "2026-10-19 10:15"  # pin the clock (New York time)

What it reads and writes

filewhat
trader/orders.jsonthe proposed orders (trader-budget, or trader-broker's flatten)
trader/config.jsonthe limits (trader-budget ships config.example.json)
trader/portfolio.jsoncash and holdings; if missing, a fresh account funded with the budget
trader/prices.jsona fresh price raises the entry it measures risk from; also values holdings
trader/state/broker.jsonwhat was placed today: duplicates, trades per day, daily loss, day trades
trader/state/risk.jsonthe verdicts it writes, with a fingerprint of each exact order

Entries and exits

An entry opens or adds to a position: a buy, or a sell that would go short. An exit only reduces what you already hold. Getting out must always be possible, so an exit is checked for format, asset and short sales only. Every other rule (day limits, entry window, loss, reward:risk, blocked list, size, duplicates) turns into a warning for an exit, never a BLOCK.

The checks

Orders are checked in file order, as if each passed order had filled, so a batch that is fine order by order but breaks a limit together is caught.

checkblocks when
formatno symbol, side not buy or sell, both or neither of qty and notional, a notional order that is not market + day (Alpaca's rule), a limit order with no limit price; a bracket that is not whole shares, not day or gtc, or misses its stop-loss or take-profit
assetan option symbol while allow_options is false; crypto or anything that is not a US stock or ETF ticker
shorta sell of more than you hold (allow_short false)
blocked(entries) the ticker is on the blocked list
size(entries) under min_order_usd or over max_order_usd
position(entries) the stock would be over max_position_pct of the account
cash(entries) the buy would leave less than the cash buffer, or need margin
stop(entries) no stop while require_stop is true (a bracket stop_loss_stop_price, or the order's plan stop); a stop on the wrong side of the entry
loss(entries) qty x (entry minus stop) over max_loss_per_trade_usd
reward:risk(entries) (target minus entry) / (entry minus stop) under min_reward_risk
daily loss(entries) the max losses at the stops of today's entries, plus this one, over max_daily_loss_usd
trades(entries) max_trades_per_day entries already placed today
window(entries) before no_entries_before or after no_entries_after, or the market is closed
pdt(entries, only with pdt_guard true) 3 day trades already in the last 5 business days
duplicate(entries) the same symbol and side twice in one batch, or already placed today
daily limit(entries) max_orders_per_day orders already placed today

How the numbers work:

  • The entry it measures from: the limit price for a limit order. For a market order, the HIGHER of the plan's entry and a fresh price from trader/prices.json (under 15 minutes old). A plan written at 10:15 cannot understate the risk at 10:55 after the price ran up. An older price is not used, and it says so.
  • Daily loss counts the full max loss of every entry placed today, win or lose, as trader-broker logged it. Three full-size trades use up a $150 day.
  • The window is New York time, worked out in the tool (daylight saving included), never from the computer's clock zone. Weekends and NYSE holidays are closed. On a 1:00 p.m. early close the window ends 3 hours earlier too. Set both no_entries_* to null to switch the window off.
  • pdt_guard (off by default) counts a day trade as a symbol bought and sold on the same day in the log, plus any entry placed today (it is meant to be flat by the close). FINRA removed the $25,000 pattern-day-trader minimum (Regulatory Notice 26-10, effective June 4, 2026; firms may phase in until October 20, 2027), so some brokers still apply the old rule: turn pdt_guard on if yours does.

Warnings do not block, but say them to the user: a LIVE account, a number sent as a number instead of a string, a stop that lives only in the plan and not at the broker, a price too old to use, an early close today.

Steps

  1. If the price may have moved since the plan, refresh it first (trader-alerts: alerts.py quote TSLA --write).
  2. Run check.py. Exit code 0 means every order passed, 1 means at least one was blocked.
  3. Tell the user the result in plain words, order by order: the max loss at the stop, reward:risk, and how much of today's limits it uses. For a BLOCK, give the reason and the fix (fewer shares, a closer stop from trader-exit, wait for the window, or skip the trade). Never change a limit yourself.
  4. If the order changes in any way, run the check again. trader-broker matches each order to its verdict by fingerprint, so an edited order is not ready until it passes again, and a verdict from yesterday does not count today.

Example: the reel

The TSLA bracket from trader-budget at 10:15 AM on Monday 2026-10-19, on a fresh $5,000 paper account with the example config:

PASS  #1 buy TSLA 8 shares, entry
          entry 364.18 (the plan's entry), stop 358.32, target 370.04: risk 5.86 a share
          max loss $46.88 (limit $50), reward:risk 1.00 (min 1)
          today before this: 0 of 3 trades, $0 of $150 daily loss

1 passed, 0 blocked at 2026-10-19 10:15 New York. Cash after the passed orders: $2,086.56 (paper account).

One more share and it is blocked:

BLOCK #1 buy TSLA 9 shares, entry
          entry 364.18 (the plan's entry), stop 358.32, target 370.04: risk 5.86 a share
          max loss $52.74 (limit $50), reward:risk 1.00 (min 1)
          today before this: 0 of 3 trades, $0 of $150 daily loss
        - loss: 9 shares x 5.86 risk a share = $52.74 at the stop, over your $50 max loss per trade

The same 8 shares checked at 10:55 with the real 10:52 quote (366.48) in trader/prices.json are blocked twice: 8 x 8.16 = $65.28 at the stop, and reward:risk 0.44. At 9:40 they are blocked by the window (no new entries before 9:45). The 3:55 PM sell that closes the position passes, even though it is after the 3:30 entry cutoff: it is an exit.

Rules

  • A PASS only means the order is allowed to be shown to the user. It is not a yes.
  • Every number comes from the config, the order, the portfolio, the prices or the broker log.
  • Free Yahoo prices are unofficial and can lag; the broker's price is the one that fills, and a stop can fill worse than its price in a fast market.

What it never does

It never places an order, never edits an order to make it pass, never loosens a limit, never blocks a sell that only gets the user out, and never treats a PASS as the user's yes.

Safety

  • Education and tooling, not financial advice. A PASS is a rules check, not a recommendation.
  • Paper trading by default ("paper": true). Going live is the user's own decision, in their own config.
  • Nothing in this pack places an order except trader-broker, and only when all three hold: trader-risk passed that exact order today, the user typed an explicit yes for that one order in the chat, and the user clicked Allow once on Claude's own card because the order tool is set to "Needs approval" (Customize > Connectors > tool permissions). Never set an order tool to "Always allow".
  • No options, margin, short selling or leverage unless the config allows it and the user confirms.
  • Broker keys live in environment variables or the Claude Desktop config, never in the chat.

리뷰

아직 리뷰가 없습니다. 사용해 본 소감을 남겨 주세요.

댓글

로그인 없이 쓸 수 있습니다. 사용 후기, 질문, 작동하지 않은 환경 등을 편하게 남겨 주세요.

아직 댓글이 없습니다. 첫 댓글을 남겨 보세요.

보내면 바로 공개됩니다. 이메일 주소나 전화번호 같은 개인 정보는 쓰지 마세요. URL은 2개까지입니다.

0 / 1,000자

이 양식은 reCAPTCHA로 보호되며 Google 개인정보처리방침 및 서비스 약관이 적용됩니다.

같은 저장소의 스킬

Set one-time alerts for price levels, stop and target levels, percentage moves, scheduled times, and the NYSE opening bell. It can create stop, target, and flat-by-close alerts from a trade plan, check delayed quotes, and save prices for sizing and risk checks.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

  • Set stop, target, and close-time alerts from a trade plan
  • Watch a ticker for a price or percentage move
  • Check whether the NYSE is open and when it next opens
Jakeschincariol/day-trader-skill1.5천2026년 10월 20일 업데이트

Review a company’s SEC filings to compare quarterly revenue, income, margins, and diluted EPS with the same quarter a year earlier, plus trailing twelve-month figures. Use an earnings release for context and summarize a pasted call transcript.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

  • Compare a company’s latest quarter with the prior year
  • Check revenue, margins, net income, and EPS trends
  • Summarize an earnings call transcript supplied by the user
Jakeschincariol/day-trader-skill1.5천2026년 10월 20일 업데이트

Prepare and present broker order tickets, record the user’s explicit yes, and track order results and fills. The workflow uses paper trading by default and requires a separate permission approval before an order is sent.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

  • Review a paper trading order ticket before sending it
  • Set up the Alpaca MCP server in Claude Desktop
  • Record an order fill or prepare a closing sell order
Jakeschincariol/day-trader-skill1.5천2026년 10월 20일 업데이트

Calculate whole-share position size from a trade plan, budget, and configured limits for loss, position value, order size, and cash buffer. See which limit determines the size and get one proposed bracket order; the skill does not place it.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

  • Calculate how many shares fit a trade plan and budget
  • See which account limit determines a position size
  • Draft a bracket order with stop-loss and take-profit prices
Jakeschincariol/day-trader-skill1.5천2026년 10월 20일 업데이트

Watch a stock setup bar by bar and get the time and closing price when a completed 1- or 5-minute bar moves above an opening-range high or a level you specify. It can check volume and save the signal for exit planning; it never places an order.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

  • Watching for an opening-range breakout
  • Checking whether a stock closed above a chosen level
  • Monitoring a ticker or watchlist for entry signals
Jakeschincariol/day-trader-skill1.5천2026년 10월 20일 업데이트

Plan a long trade’s stop and target before entry using a trigger from trader-entry or a price you provide. Choose stop and target rules, review per-share risk and reward-to-risk, and save the plan for related tools. It does not place orders.

한국어 요약은 준비 중입니다. 영어 요약을 표시하고 있습니다.

  • Setting a stop and target before entering a trade
  • Comparing stop rules for an opening-range setup
  • Calculating per-share risk and reward-to-risk
Jakeschincariol/day-trader-skill1.5천2026년 10월 20일 업데이트

Jakeschincariol의 스킬 모두 보기

이 스킬의 문제 신고