본문으로 건너뛰기
cccskills
무료GitHub에 공개

bench-virtual-rule

Mirror a preset virtual rule (selectors under `nodeRules` in preset.html-standard.jsonc and similar) into bench/config.ts so the benchmark exercises it. Use when a new disallowed-element / similar selector lands in a preset and the matching nu fixtures remain stuck at nu-only despite the new rule existing in markuplint. Trigger keywords: virtual rule, nodeRules, disallowed-element, preset html-standard, bench config mirror, rule does not fire on bench, preset rule not exercised.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

markuplint/markuplint스타 630(GitHub 630 + cccskills 0)

실행 점수 미검증

설치 방법 보기

포함된 파일(1)

  • SKILL.md2.3 KB

SKILL.md(원문)

설치하기 전에 에이전트에게 전달되는 지시 내용을 확인할 수 있습니다.

Bench Virtual Rule Mirror Skill

bench/config.ts does not extends: ['markuplint:html-standard']. It curates rules explicitly so the bench surface stays scoped to nu-validator capability. Consequence: any new entry in a preset's nodeRules[] is invisible to the benchmark until the same selectors are mirrored into bench/config.ts. Symptom: fixtures the new virtual rule should detect remain at nu-only and look like a markuplint coverage gap when the rule already exists.

Procedure

  1. Add the selector(s) to the relevant preset (preset.html-standard.jsonc or similar).
  2. Mirror the same selectors into bench/config.ts nodeRules[] with a comment naming the source preset rule (e.g. // Mirrors html-standard/no-duplicate-charset).
  3. Run yarn bench:update:ml.
  4. Verify the target fixtures flipped from nu-only → match-error. If they didn't, the selectors don't actually match those fixtures — check selector syntax (caveats below).
  5. If the rule does not map onto any nu-validator capability, skip step 2 and add a // not mirrored: <reason> comment to the preset rule's JSDoc so the next maintainer knows it was a conscious decision.

Selector caveats

  • HTML attribute names are matched ASCII case-insensitively ([charset] matches <meta CHARSET>). Use lowercase to match HTML's normative form.
  • The i flag (e.g. [name="description" i]) only applies to attribute values — it is unnecessary for the name, which is already case-folded for HTML.
  • Sibling selectors (~) only match elements after the anchor. Coexistence-style constraints typically need both directions (a ~ b and b ~ a) so the rule fires regardless of source order.

리뷰

아직 리뷰가 없습니다. 사용해 본 소감을 남겨 주세요.

댓글

로그인 없이 쓸 수 있습니다. 사용 후기, 질문, 작동하지 않은 환경 등을 편하게 남겨 주세요.

아직 댓글이 없습니다. 첫 댓글을 남겨 보세요.

보내면 바로 공개됩니다. 이메일 주소나 전화번호 같은 개인 정보는 쓰지 마세요. URL은 2개까지입니다.

0 / 1,000자

이 양식은 reCAPTCHA로 보호되며 Google 개인정보처리방침 및 서비스 약관이 적용됩니다.

같은 저장소의 스킬

bench-maintain

무료

Maintenance of the nu-validator coverage benchmark: defend the invariants (nu-only = 0, xref audit green), follow up a nu-validator upstream update (submodule bump / Docker image drift), and regression-check after markuplint rule or spec changes. Use when updating the validator submodule, when a bench refresh surfaces new nu-only entries, when excluded-ids entries go stale, or for the periodic health check. Trigger keywords: bench maintain, bench maintenance, nu update, submodule bump, validator update, bench refresh, nu-only regression, stale excluded-ids, image digest.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

markuplint/markuplint6302026년 10월 26일 업데이트

bench-rule-enable

무료

Enable an existing or newly-added markuplint rule on the nu-validator bench by editing tests/external/bench/config.ts. Covers the flat-rule case (rules: { '<name>': true }) and the severity override case (rules: { '<name>': { severity: 'error' } }) that bench-virtual-rule does not. Use when a rule exists in the registry but the relevant nu fixtures stay nu-only because the rule is not enabled in the bench config, or when a rule's default severity is warning but the spec text it mirrors is a MUST / MUST NOT. Trigger keywords: enable bench rule, bench config flat rule, severity override bench, rule not flagging on bench, warning vs error in bench, escalate severity bench, no-contradictory-aria-prop bench, bench coverage missing rule.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

markuplint/markuplint6302026년 10월 26일 업데이트

bench-setup

무료

Set up the nu-validator benchmark environment — initialise the validator submodule, ensure Docker is running, populate the gitignored raw snapshots via yarn bench:update. Also covers Docker / nu-runner troubleshooting. Use when bench commands fail with "no snapshots found", "Docker daemon not reachable", port 28888 conflicts, or healthcheck timeouts; or when refreshing the bench after a long break. Trigger keywords: bench setup, bench Docker, validator submodule, no snapshots found, Docker daemon not reachable, healthcheck times out, port 28888, yarn bench:update first time, bench install, fresh clone bench.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

markuplint/markuplint6302026년 10월 26일 업데이트

bench-triage

무료

Triage one nu-only fixture from tests/external/snapshots/diff/nu-only.json by reading the spec, then drive its verdict to match-error, match-clean, or nu-over by either fixing markuplint or recording an excluded-ids.json entry. The core per-fixture operation of the nu-validator coverage benchmark. Use when a bench refresh surfaces new nu-only entries, when checking a coverage-claim ("markuplint misses X" / "over-detects Y") against the bench, or when classifying a specific fixture. Trigger keywords: nu-only, ml-only, coverage gap, bench triage, verdict, match-error, match-clean, nu-over, excluded-ids, declare nu over-detection, claim audit, audit fixture, mark-up valid per spec, spec-cited exclusion.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

markuplint/markuplint6302026년 10월 26일 업데이트

bench-xref

무료

Sync benchmark cross-reference blocks onto GitHub Issue bodies via `yarn bench:xref`, manage `tests/external/bench/issue-xref.config.ts` mappings, and run the pre-release checklist. Use when adding / removing / updating a primary or secondary mapping, when an issue closes upstream, when the xref CLI's output disagrees with what's on the issue body, or before cutting a release that touches a rule the benchmark covers. Trigger keywords: bench-xref, issue-xref, xref CLI, GitHub issue body, primary mapping, secondary mapping, umbrella block, pre-release checklist, bench-xref-audit workflow, marker version.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

markuplint/markuplint6302026년 10월 26일 업데이트

create-issue

무료

Investigate a problem to its root cause and file it as a GitHub Issue with the right labels and an As is / To be / Why / How body backed by primary sources. Use when asked to file, create, or open an issue, or when the `impl` skill hands over a carry-over. Trigger keywords: create issue, file an issue, open an issue, report a bug as an issue.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

markuplint/markuplint6302026년 10월 26일 업데이트

markuplint의 스킬 모두 보기

이 스킬의 문제 신고