Bring an EPA SWMM (.inp) or EPANET (.inp) model into MIKE+ via the mike-plus MCP server — the bridge from an INP builder such as SWMMCanada or agentic-swmm into a MIKE+ database that mike_model_info / mike_run can use. Use when the user has an .inp and wants it in MIKE+. Requires MIKE+ installed + a checked-out license (demo mode caps the model size).
한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.
설치 방법 보기설치하기 전에 에이전트에게 전달되는 지시 내용을 확인할 수 있습니다.
Creates a new .sqlite from an .inp. SWMM data lands in MIKE+'s SWMM tables
(mss_Node, mss_Link, mss_Project, ... ; subcatchments in msm_Catchment) and the
tool switches the model type to CS_SWMM so the imported simulation setup is the
active one. mike_model_info then reports the mss_* counts and setups.
mike_import_swmm — {inp, out_sqlite, kind?='swmm'|'epanet', overwrite?, srid?, projection?} → {sqlite, inp_used, patched_outfalls_gated[], active_model, active_simulation, unit_system, simulations[], counts{nodes,links,catchments}, inp_scan}.[OUTFALLS] rows without the optional Gated column (O1 90 FREE, valid for EPA SWMM which assumes NO) with an opaque "Error importing from SWMM file." The tool writes a patched COPY <name>.mikeplus.inp next to out_sqlite (adds NO), imports that, and lists the rows in patched_outfalls_gated. Your original .inp is never modified.m_ModelSetting.ModelNo = 2 (SWMM) so active_model = CS_SWMM and the imported mss_Project setup is active.overwrite defaults to false; the tool refuses to clobber an existing .sqlite..inp (FILE "rain.dat" time series) are not copied; keep them next to the .inp and check inp_scan.TIMESERIES vs what the model expects.mike_model_info (expect CS_SWMM, mss_* counts) → copy the folder → mike_run. Running an imported SWMM-type model through mike_run has not been verified live yet (license); gate on status as always and report what you see.kind='epanet') uses the same call; the model type is left as MIKE+ sets it (report active_model).mike_import_swmm {inp, out_sqlite: runs/<case>/00_model/<name>.sqlite}
mike_model_info {sqlite} -> CS_SWMM, setups, counts
mike_run {sqlite} (license) -> result files -> mike-results / mike-plot
mike_manifest_write {model, inputs: [inp, inp_used], ...}
아직 리뷰가 없습니다. 사용해 본 소감을 남겨 주세요.
로그인 없이 쓸 수 있습니다. 사용 후기, 질문, 작동하지 않은 환경 등을 편하게 남겨 주세요.
아직 댓글이 없습니다. 첫 댓글을 남겨 보세요.
Record provenance for an Agentic MIKE+ step via the mike-plus MCP server — a manifest.json tying the model copy, inputs, edits, run QA status, result files and figures together, each file with a sha256. Use at the end of every run/compare/plot task (successful or failed) so the work can be audited, re-compared or reproduced later. No license required.
한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.
Compare two MIKE+ runs via the mike-plus MCP server — baseline vs scenario, before vs after a parameter edit — to say WHERE a change mattered and BY HOW MUCH (delta peak, delta volume, timing shift, RMSE/NSE) and to draw the overlay hydrograph. Use whenever two .res1d files of the same model exist or a re-run just finished. Comparing needs no license; producing the second run does.
한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.
Standard operating procedure for an auditable, headless MIKE+ workflow via the mike-plus MCP server — how to plan, copy, run, QA-gate, compare, plot, audit, and safely stop. Use FIRST whenever an agent is handed a MIKE+ model (.sqlite) or result (.res1d) plus a plain-language goal; it picks the operating mode and tells the agent which mike-* skill to open next and in what order.
한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.
Inspect a MIKE+ .sqlite model via the mike-plus MCP server — active simulation/scenario/model type, unit system, the list of simulation setups and scenarios, element counts — and switch the active scenario. Use when an agent needs to understand a MIKE+ model before running or editing it, or must run a scenario prepared in the GUI. Requires MIKE+ installed + a license.
한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.
Read and modify MIKE+ model parameters via the mike-plus MCP server — inspect or change values in any model table (pipe Diameter/Manning in msm_Link, node levels in msm_Node, catchment properties in msm_Catchment, etc.). Use when an agent must identify a current parameter and change it before re-running. Requires MIKE+ + license; mutating tools must run on a copy.
한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.
Produce publication-style figures from MIKE+ .res1d results via the mike-plus MCP server — a stacked rainfall-runoff hydrograph, a single time series, a network map, a baseline-vs-scenario overlay, or a longitudinal profile (bed / crown / ground / max water level along a pipe string), in the house style (Arial 12, ticks inward, SI units, no title). Use when an agent must render MIKE+ results as a PNG without opening the GUI. No license required.
한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.