スキルを探す

Configure a Simulink model for Simulink Real-Time code generation and deployment. Use when setting up a model for Simulink Real-Time, selecting the correct system target file, fixing TLC/STF mismatches, applying fixed-step solver settings, validating target-platform compatibility, or configuring Simulink Real-Time build options before model build.

日本語の概要は準備中です。原文の説明を表示しています。

Use when SLCI code inspection has failed due to compatibility issues and you need to diagnose the incompatibilities. Traces inspection failures back to root-cause incompatibility settings or known limitations by matching failed code lines against known incorrect code generation patterns and documented limitation scenarios. Hands off to slci-compatibility-analysis for fixes. Trigger keywords: inspect, inspection failed, trace inspection errors, why did inspection fail, SLCI verification failures, limitation.

日本語の概要は準備中です。原文の説明を表示しています。

Manage Simulink Real-Time target computers from MATLAB — list available targets, check whether a target is connected, read its lifecycle status, add/remove/rename targets, set IP addresses and credentials, choose the default target, install TLS material, configure a startup application, and run target lifecycle ops (connect, reboot, RTOS update). Use whenever the user asks "which targets are available", "is my target connected", "what's the status of the target", "add a Speedgoat", "switch default target", "change the target IP", "reboot the box", "update the target", or works with `slrealtime.Targets`, `tg = slrealtime`, `addTarget`, `removeTarget`, `getTargetNames`, `getDefaultTargetName`, `setDefaultTargetName`, `connect`, `isConnected`, `status(tg)`, `setipaddr`, `setupTLSCertificate`, `setStartupApp`, `reboot`, `update`, or `slrealtime.testSetup`. Covers Speedgoat target computers and Simulink Real-Time Linux devices.

日本語の概要は準備中です。原文の説明を表示しています。

Build, deploy, run, monitor, tune, and stop Simulink Real-Time applications. Use when the user wants to build a Simulink Real-Time model, load/start/stop an `.mldatx` on a target, set stop time or start options, drive root inports/playback/parameter stimulation, inspect installed or running apps, tune parameters with `getparam`/`setparam`, read ad hoc signal values with `getsignal`, manage parameter sets, control recording, or choose between file logging, live streaming, and file-log import. Covers `slbuild`, `install`, `load`, `start`, `stop`, `setStopTime`, `tg.Stimulation`, `startRecording`/`stopRecording`, `tg.FileLog.import`, `slrealtime.exportRun`, `getparam`/`setparam`, `getsignal`, and installed app management for Speedgoat targets and Simulink Real-Time Linux devices.

日本語の概要は準備中です。原文の説明を表示しています。

Collect and assess quality metrics for Simulink models using the metric.Engine API. Use when evaluating model design quality (maintainability, complexity, architecture) or testing completeness (unit testing, SIL, PIL, coverage, pass rates) after edits or test runs. Covers metric discovery, collection, report generation, and diagnostics. Triggers on: "collect metrics", "quality metrics", "metric.Engine", "testing metrics", "maintainability metrics", "SIL metrics", "PIL metrics", "what metrics are available", "assess quality", "coverage metrics", "generate metric report", "diagnose metric errors".

日本語の概要は準備中です。原文の説明を表示しています。

Set up signal capture for a Simulink Real-Time application using `slrealtime.Instrument`. Use when choosing which signals a real-time application captures and where the data goes — test-pointing or canvas-badging a signal before build (`TestPoint`, `DataLogging`), constructing an Instrument from an `.mldatx`, calling `addSignal`, `addInstrumentedSignals`, `addFileLogSignals`, `validate`, `connectCallback`, `copy`, or `generateScript`, attaching an instrument to `tg.Instruments` via `addForFileLog`, `addForSDI`, or `addForMATLAB`, setting up live-streaming signals, dynamic file-log workflows, or persisting an instrument as M-code. Selects and routes signals only — not for configuring, building, running, or connecting applications onto targets.

日本語の概要は準備中です。原文の説明を表示しています。

Use when you need to verify a Simulink model is compatible with SLCI code inspection, or to apply fixes for identified incompatibilities. Checks model configuration, identifies incompatibilities, and explains why each constraint is required for verification. Also invoked by slci-inspection-incompatibility-analysis to fix constraints and obtain compatibility results. Trigger keywords: checkCompatibility, SLCI compatibility, code inspection readiness, Model Advisor compatibility report.

日本語の概要は準備中です。原文の説明を表示しています。

Builds and edits Simulink, System Composer, Stateflow, and Simscape models. Use when modifying model structure, parameters, ports, connections, or Stateflow chart internals.

日本語の概要は準備中です。原文の説明を表示しています。

Converts a double-precision Simulink system or subsystem to single precision using DataTypeWorkflow.Single (Fixed-Point Designer). The single conversion replaces all user-specified double-precision data types, as well as output data types that compile to double precision, with single-precision data types. Use this skill when converting Simulink systems to single precision, reducing memory usage of a Simulink system, optimizing for embedded targets. Do NOT use for standalone MATLAB .m code single conversion.

日本語の概要は準備中です。原文の説明を表示しています。

Generates draft requirements from Simulink models. Use when drafting or updating requirement artifacts from a model. Prefers Requirements Toolbox (.slreqx) when available; falls back to structured YAML.

日本語の概要は準備中です。原文の説明を表示しています。

Specify plant models for closed-loop simulation: system specs, architecture, build plans, validation plans. Use when creating, updating, or reviewing plant model specifications, planning plant model architecture, or planning plant model validation.

日本語の概要は準備中です。原文の説明を表示しています。

Optimizes Simulink models for Embedded Coder generated code. Use when asked to optimize or improve generated code, or reduce code metrics for a Simulink model. Targets: execution time, memory footprint (RAM, ROM, stack, data copies), code size, MISRA compliance, or any semantically similar generated-code metric. Works iteratively — measures baseline, suggests changes, applies, and re-measures to confirm improvement. Triggers can be prompts similar to: optimize generated code runtime, reduce runtime, shrink code size, improve code efficiency, reduce memory usage, speed up generated code, follow MISRA compliance and so on. CAUTION: Do NOT attempt to optimize Simulink models for generated code efficiency without following this skill — the iterative measurement, gating, and rollback workflow is essential for safe optimization.

日本語の概要は準備中です。原文の説明を表示しています。

Build motor control solutions using Motor Control Blockset for PMSM, induction motors, BLDC, and SynRM. Implement field oriented control, sensorless FOC, six-step control, speed control, current control, and torque control. Configure SVPWM, flux weakening, MTPA, MTPV, control of non-linear motors, inverter control, and motor parameter estimation. Compose motor drive models, tune gains, and generate embedded code.

日本語の概要は準備中です。原文の説明を表示しています。

Linearize Simulink models. Use when obtaining linear time invariant or linear parameter varying models from Simulink models.

日本語の概要は準備中です。原文の説明を表示しています。

Common steps for building multi-layer system architecture models using System Composer. Use when implementing architecture models or when interacting with interface dictionaries, allocation sets, stereotypes, and requirements for architecture components.

日本語の概要は準備中です。原文の説明を表示しています。

Find, show, open, or identify shipped MathWorks example models that demonstrate a concept, block, or application domain, and return the command to open them.

日本語の概要は準備中です。原文の説明を表示しています。

Configures Simulink simulations non-destructively using SimulationInput objects — parameter overrides without modifying the model, batch sweeps via parsim, custom input signals via Dataset, and simulation data retrieval via logsout. Use when running sim()/parsim() with setVariable, setBlockParameter, setExternalInput, or when performing parameter sweeps and multi-run analysis. Not needed for one-shot simulations without configuration.

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill when the user wants to curate the SATK library knowledge index for a Simulink project — mark commonly used blocks, correct auto-assigned block categories, or improve block descriptions so the model-building agent picks better blocks from custom libraries. Triggered by phrases like "mark blocks common", "improve block descriptions", "correct block category", "make the agent prefer certain blocks", and from Gate 3 of building-simulink-models.

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill when authoring, reworking, or validating a Classic AUTOSAR software component (SWC) in Simulink, including autosar.api mappings, runnables, timing events, sender-receiver ports, client-server operations, IRVs, BSW service callers, and component ARXML updates.

日本語の概要は準備中です。原文の説明を表示しています。

Customize A2L (ASAP2) files generated from Simulink models using coder.asap2 and coder.mapping APIs. Use this skill when adding COMPU_METHODs, creating GROUPs, converting STD_AXIS to COM_AXIS, adding BIT_OPERATIONs, creating VARIANT_CODING, excluding measurements or struct elements, removing DEFAULT_EVENT_LIST, or any A2L customization for calibration tool compatibility (INCA, CANape). Also use when the user mentions ASAP2, ECU calibration data, A2L export.

日本語の概要は準備中です。原文の説明を表示しています。

Configure Simulink models for Embedded Coder (ERT), Simulink Coder (GRT rapid-prototyping), or AUTOSAR code generation. Use when the user asks to generate embedded C or C++ code, run a full build of a model, produce a code generation report, configure a model for production/ECU deployment or rapid-prototyping code, target ARM or x86 hardware, apply MISRA C/C++ compliance (ERT/AUTOSAR only — Simulink Coder does not ship MISRA profiles), or set up GRT, ERT, AUTOSAR, or shared-library targets. Handles target selection, hardware mapping, model hierarchy propagation, and constraint introspection via the configure_for_codegen function. Do NOT use for GRT shared-library variants (grt_malloc.tlc), DDS, or ROS, or for iterative optimization workflows that measure baseline metrics, apply targeted changes, and re-measure to confirm improvement.

日本語の概要は準備中です。原文の説明を表示しています。

Specify algorithms for Model-Based Design: system specs, architecture specs, implementation plans, test plans. Use when creating specifications for controllers, signal processing, diagnostics, estimators, or other algorithms authored in Simulink, Stateflow, System Composer, or MATLAB Function blocks.

日本語の概要は準備中です。原文の説明を表示しています。

Manages MATLAB projects for Simulink workflows: path management, file registration, labels, source control configuration, and project lifecycle. Use when creating projects, adding models/dictionaries/requirements to projects, configuring labels for automation, fixing broken model references, or setting up source control for Simulink artifacts.

日本語の概要は準備中です。原文の説明を表示しています。

Register, add, or update existing custom Simulink block libraries and configure block policy and knowledge index. Use when a user wants to register, set up, configure, or add existing .slx library files for agent-assisted model building. Do NOT use when the user wants to create or author a new library from scratch — that requires building-simulink-models.

日本語の概要は準備中です。原文の説明を表示しています。