「rag」の検索結果

Calls m6A peaks from MeRIP-seq / m6A-seq paired IP-vs-input data using exomePeak2 (transcript-aware, GC-bias-corrected Poisson GLM; Liu 2022 *NAR Genom Bioinform* 4:lqac046), MeTPeak (HMM over sliding windows; Cui 2016 *Bioinformatics* 32:i378), MACS3 / MACS2 with --nomodel --broad --keep-dup all (genome-wide broad alternative), and DRACH motif enrichment confirmation via HOMER or ggseqlogo as a sanity check (NOT a filter). Covers BED12 vs narrowPeak output formats, exonic vs intronic peak handling, multi-tool reconciliation (intersection vs union; cross-caller IDR-equivalent), the m6A-vs-m6Am ambiguity at 5'UTR peaks that antibody-based methods cannot resolve, and orthogonal-validation routes (miCLIP / GLORI / m6A-SAC-seq / m6Anet). Use when calling peaks from paired IP/input genome BAMs, choosing exomePeak2 (transcript-aware default) vs MACS3 (broad genomic) vs MeTPeak (HMM-smoothed low-coverage), confirming DRACH enrichment as a sanity check on the peak set as a whole, reconciling differing peak sets across tools, validating MeRIP peaks against orthogonal single-base methods, interpreting peaks at the 5' end where m6Am contamination is possible, or recommending a multi-tool consensus strategy.

日本語の概要は準備中です。原文の説明を表示しています。

Detects m6A modifications from Oxford Nanopore direct-RNA-sequencing (ONT DRS) signal data using m6Anet (Hendra 2022 *Nat Methods* 19:1590; multiple-instance-learning neural network over DRACH 5-mer signal). Covers the required upstream pipeline (Dorado / Guppy basecalling -> minimap2 transcriptome alignment with `-ax map-ont -uf -k14 --secondary=no` -> nanopolish eventalign with `--scale-events --signal-index` (m6Anet-required) plus `--summary` / `--threads` housekeeping -> m6anet dataprep -> m6anet inference), per-site vs per-read probability interpretation including the `mod_ratio` per-site stoichiometry column, the DRACH-only modeling constraint, minimum-coverage thresholds (20-50 reads per site for stable probability estimates), multi-condition comparison via xPore (Pratanwanich 2021 *Nat Biotechnol* 39:1394), Nanocompore (Leger 2021 *Nat Commun* 12:7198), ELIGOS (Jenjaroenpun 2021 *NAR* 49:e7), and Dorado native modification calling (RNA004 chemistry, 2024+), reference-transcriptome version pinning, the cDNA-vs-DRS chemistry distinction (cDNA-Nanopore CANNOT be used for modification detection), and orthogonal validation against MeRIP / GLORI. Use when calling m6A from ONT DRS without immunoprecipitation, choosing m6Anet vs xPore vs Nanocompore vs ELIGOS vs Dorado native, interpreting per-site `probability_modified` vs `mod_ratio` vs per-read modification probabilities, comparing methylation between conditions from ONT data, deciding between m6Anet for known DRACH sites and Dorado/Remora for genome-wide screening, pinning RNA002 vs RNA004 chemistry and basecaller model versions, or troubleshooting eventalign / dataprep failures.

日本語の概要は準備中です。原文の説明を表示しています。

Controls error rates across thousands of simultaneous tests in genomics discovery using false-discovery-rate methods (Benjamini-Hochberg 1995; Benjamini-Yekutieli 2001 for arbitrary dependence; Storey q-value with pi0 estimation; local FDR; independent filtering Bourgon 2010; covariate-weighted FDR via IHW Ignatiadis 2016), plus family-wise error control (Bonferroni, Holm) and the GWAS genome-wide threshold. Covers the FDR-versus-FWER choice as the discovery-versus-confirmatory distinction, the dependence assumptions behind BH (PRDS) versus BY, pi0 estimation, the independent-filtering and false-coverage-rate traps, and reproducibility ranking via IDR (Li 2011). Use when correcting p-values from genome-wide tests, choosing between BH/BY/q-value/Bonferroni, setting an FDR threshold, applying IHW or independent filtering, or interpreting q-values. For confirmatory trials with few pre-specified endpoints (closed testing, graphical/gatekeeping), see clinical-biostatistics/multiplicity-graphical.

日本語の概要は準備中です。原文の説明を表示しています。

Calculates statistical power for high-dimensional genomics experiments (bulk RNA-seq, scRNA-seq, ATAC-seq, ChIP-seq, methylation, proteomics) under negative-binomial count models using RNASeqPower, PROPER, and simulation via powsimR, distinguishing per-gene from marginal (transcriptome-wide) power, the role of mean expression and dispersion, and the sequencing-depth-versus-replicate tradeoff. Covers simulation as the honest default for overdispersed counts, FDR-aware average power versus single-test power, observed/post-hoc power as an anti-pattern, and the winner's-curse / Type-S / Type-M consequences of underpowering. Use when planning replicate number for a sequencing experiment, deciding whether to add depth or samples, choosing closed-form versus simulation power, estimating power from pilot dispersions, or justifying replication in a grant. For clinical-trial power see clinical-biostatistics/power-and-sample-size; for the inverse sample-size question see experimental-design/sample-size.

日本語の概要は準備中です。原文の説明を表示しています。

Model gene-family birth-death dynamics across a species tree using CAFE5 (Mendes et al 2020 Bioinformatics 36:5516 gamma-distributed rate categories), CAFE5-error (annotation-error-aware), Count (Csurös 2010 ancestral state reconstruction), BadiRate (Librado 2012 likelihood + parsimony), DupliPHY-Family, and ALE/AleRax (for per-family DTL; see [[gene-tree-species-tree-reconciliation]]). Test lineage-specific gene-family expansions and contractions, distinguish biological dynamics from annotation artifacts, account for assembly fragmentation, identify functional enrichment in expanded / contracted families. Use when correlating gene-family changes with phenotype evolution, ranking lineages by adaptive gene-family-rate shifts, post-WGD dosage-balance analysis, or building Birth-death models from OrthoFinder presence/absence matrices.

日本語の概要は準備中です。原文の説明を表示しています。

Normalize read-depth copy-ratio profiles and segment them into copy-number regions using circular binary segmentation (CBS, DNAcopy), hidden Markov models, HaarSeg, and fused-lasso methods. Covers GC-content, mappability, and replication-timing (wave-artifact) bias correction, panel-of-normals/PCA denoising, diploid-baseline centering, and algorithm selection by sequencing depth and event size. Use when choosing a segmentation algorithm, correcting depth bias, diagnosing oversegmentation or a mis-centered baseline, tuning CBS or HMM parameters, or understanding why a downstream CNV caller produced fragmented or shifted segments.

日本語の概要は準備中です。原文の説明を表示しています。

Comprehensive quality control for CLIP-seq libraries (eCLIP, iCLIP, iCLIP2, PAR-CLIP) covering library complexity (preseq), FRiP, IDR replicate reproducibility, read-distribution metagene, SMInput vs IgG control rationale, rRNA / snoRNA contamination, fragment-length distribution, and ENCODE-compliance thresholds. Use when assessing whether a CLIP library passed, deciding lenient vs stringent peak thresholds, comparing replicates with IDR rescue and self-consistency ratios, or distinguishing failed IP from over-amplified library.

日本語の概要は準備中です。原文の説明を表示しています。

Detect somatic and germline copy number variants from targeted, exome, and whole-genome sequencing with CNVkit, a read-depth caller that combines on-target and off-target (antitarget) coverage. Covers panel-of-normals construction, flat-reference tumor-only calling, hybrid/amplicon/WGS modes, CBS vs HMM segmentation selection, purity-aware integer calling, and reconciliation against GATK and allele-specific callers. Use when calling CNVs from hybrid-capture panels or exomes, deciding whether CNVkit (depth-only) is the right tool versus an allele-specific caller, building a panel of normals, diagnosing flat-reference false positives, or interpreting log2 ratios into copy-number states.

日本語の概要は準備中です。原文の説明を表示しています。

Call protein-RNA binding sites from CLIP-seq BAM with CLIPper, PureCLIP, Skipper, Piranha, omniCLIP, CTK, CLAM, or Paraclu. Use when choosing between coverage-based, HMM-based, beta-binomial window-based, and crosslink-site-based peak callers; applying ENCODE eCLIP thresholds (log2 IP/SMInput >= 3, -log10 p >= 3); deciding when SMInput is mandatory; or reconciling peak-set discordance between callers for the same RBP.

日本語の概要は準備中です。原文の説明を表示しています。

Analyzes CUT&RUN (Skene Henikoff 2017) and CUT&Tag (Kaya-Okur 2019) chromatin profiling data. Handles SEACR vs MACS2 peak calling (with the btaf375 2025 benchmark guidance), pA-MNase vs pA-Tn5 vs pAG-Tn5 chimera differences, E. coli spike-in carryover normalization, IgG-only control logic (no input), characteristic fragment-size signatures (25-75 bp for CUT&Tag), and lower depth requirements (5M reads typical vs 25M for ChIP). Use when calling peaks from CUT&RUN/CUT&Tag, scaling by E. coli spike-in carryover, choosing SEACR norm mode, or comparing CUT&RUN/Tag results to traditional ChIP.

日本語の概要は準備中です。原文の説明を表示しています。

Reads, writes, and converts molecular file formats (SMILES, InChI, SDF V2000/V3000, MOL2, PDB, MMTF) using RDKit and Open Babel with rigorous handling of aromaticity perception, stereochemistry, implicit/explicit hydrogens, kekulization, and salt/fragment separation. Use when loading chemical libraries, debugging parse failures, or preparing molecules for downstream standardization, descriptor calculation, or docking.

日本語の概要は準備中です。原文の説明を表示しています。

Enumerates virtual chemical libraries via reaction SMARTS transformations using RDKit and Reaction templates, with explicit handling of atom mapping, template extraction (RDKit reaction mining), product validation, RECAP/BRICS fragmentation, R-group decomposition, matched molecular pair analysis (MMPA), and Free-Wilson analysis. Use when generating combinatorial libraries from building blocks, enumerating analog series, deriving structure-activity rules, or extracting transformations from reaction data.

日本語の概要は準備中です。原文の説明を表示しています。

Calls ChIP-seq peaks with MACS3, MACS2, HOMER, or SPP across narrow (TF) and broad (histone) modes. Handles input control matching, fragment-size modeling vs --nomodel, effective genome size, ENCODE-style IDR vs naive overlap, hyper-ChIPable artifacts, and aligner-specific shifts. Use when calling peaks from ChIP-seq alignments, choosing between narrow vs broad mode for a histone mark, deciding model vs nomodel for low-depth data, applying ENCODE pseudoreplicate IDR, or reconciling MACS vs HOMER vs SPP results.

日本語の概要は準備中です。原文の説明を表示しています。

Visualizes ChIP-seq data using deepTools (computeMatrix, plotHeatmap, plotProfile, bamCoverage, bamCompare), pyGenomeTracks (modern INI-driven track plots), Gviz (R browser-style), EnrichedHeatmap (ComplexHeatmap-based), ChIPseeker tag heatmaps, and IGV batch screenshots. Handles bigWig normalization choices (CPM, BPM, RPGC, spike-in scaled), bamCompare operations (log2 ratio, subtract, SES), k-means clustering of heatmaps for biological subgrouping, and spike-in-scaled tracks for global-shift experiments. Use when generating publication-quality ChIP-seq signal heatmaps, profile plots, genome-browser tracks, or comparing samples visually.

日本語の概要は準備中です。原文の説明を表示しています。

Assesses ChIP-seq quality across antibody specificity, fragmentation, enrichment, replicate concordance, and library complexity. Computes FRiP, NSC/RSC (phantompeakqualtools), library complexity (NRF/PBC1/PBC2), deepTools plotFingerprint (JS distance, AUC, synthetic JS), ChIPQC, IDR with ENCODE Nself/Nt rules, and detects hyper-ChIPable artifacts. Use when validating an antibody, diagnosing failed peak calls, deciding whether to proceed with downstream analysis, grading against ENCODE thresholds, or auditing replicate concordance.

日本語の概要は準備中です。原文の説明を表示しています。

Designs novel molecules using REINVENT 4 (de novo, scaffold decoration, linker design, R-group, molecular optimization), MolMIM, Diffusion-based generators (DiGress, DiffSMol), and JT-VAE with explicit handling of multi-parameter optimization (MPO), goal-directed scoring functions, transfer/reinforcement/curriculum learning, synthetic accessibility scoring, and chemical space exploration vs exploitation. Use when designing new chemical matter against a target, decorating a scaffold, linking fragments, or optimizing a hit for multiple ADMET / activity properties simultaneously.

日本語の概要は準備中です。原文の説明を表示しています。

Builds QSAR / QSPR models using chemprop D-MPNN, MolFormer, Uni-Mol, ChemBERTa, random forest baselines, and Gaussian processes with explicit handling of OECD 5 principles, applicability domain (kNN, leverage, conformal prediction, Mahalanobis), scaffold-balanced splits, ensemble uncertainty, calibration (Platt, isotonic), feature importance (SHAP, atomic attribution), and prospective validation. Use when building target-specific predictive models from in-house bioassay data, ADMET endpoints, or selectivity profiles.

日本語の概要は準備中です。原文の説明を表示しています。

Detects differential alternative splicing between conditions using rMATS-turbo (binomial LRT on junction counts), leafcutter (Dirichlet-multinomial GLM on intron clusters), MAJIQ V3 deltapsi/HET (Bayesian posterior on LSVs), SUPPA2 (empirical-null on TPM-derived PSI), or Shiba (junction-imbalance-corrected, 2025 SOTA at low coverage). Reports FDR-corrected significance and delta PSI effect sizes. Tools differ in statistical model, annotation dependence, calibration regime, and replicate-count requirements. Use when comparing splicing patterns between treatment groups, tissues, or disease states.

日本語の概要は準備中です。原文の説明を表示しています。

ATAC-seq library quality control -- TSS enrichment, FRiP, fragment-size periodicity, library complexity (NRF/PBC1/PBC2), mitochondrial fraction, and ENCODE 4 thresholds. Use when assessing whether an ATAC-seq library passes ENCODE acceptance criteria, diagnosing transposition artefacts, comparing Omni-ATAC vs standard prep quality, or selecting which replicates to drop before peak calling.

日本語の概要は準備中です。原文の説明を表示しています。

Creates sashimi-style plots showing RNA-seq read coverage and splice junction counts using ggsashimi (general-purpose, condition-grouped overlays), rmats2sashimiplot (rMATS-output-aware), MAJIQ-VOILA (LSV posteriors interactive HTML), leafviz (leafcutter clusters Shiny), Jutils (tool-agnostic heatmaps and sashimi for rMATS/leafcutter/SUPPA2/MAJIQ output), or pyGenomeTracks (multi-track publication figures). Tool choice depends on the upstream differential-splicing tool's output format and the publication vs interactive use case. Use when visualizing specific splicing events, validating differential splicing calls, or producing publication-quality figures.

日本語の概要は準備中です。原文の説明を表示しています。

Map nucleosome center positions, occupancy, and fuzziness from ATAC-seq fragment-size patterns using NucleoATAC, ATACseqQC, DANPOS3, or scprinter. Use when characterizing nucleosome organization at promoters and enhancers, calling +1/-1 nucleosomes flanking NFRs, generating V-plots for chromatin structure visualization, or comparing nucleosome positioning between conditions.

日本語の概要は準備中です。原文の説明を表示しています。

Performs simple mutation testing to verify test coverage and assertions.

日本語の概要は準備中です。原文の説明を表示しています。

Verification loop for Spring Boot projects: build, static analysis, tests with coverage, security scans, and diff review before release or PR.

日本語の概要は準備中です。原文の説明を表示しています。

Harden iOS/Android apps you ship: storage, TLS pinning policy, IPC, and backend trust. You still enforce authz on the server.

日本語の概要は準備中です。原文の説明を表示しています。