「tool」の検索結果

Queries the live CARLA world and resolves an entity description into a concrete actor id — find actors by type, role, or colour, or the single one nearest a point/actor; read the world snapshot; get static level bounding boxes by label; cast rays for semantic points; project a point to the ground; or (ros-topics) list the native ROS 2 topics each actor should be publishing and why any is silent. Identifies by stable attributes, not by any rank/order. Use when the user asks "what actors are here", "find the red prius", "the vehicle nearest the ego", "list the pedestrians", or needs a specific actor id for another skill.

日本語の概要は準備中です。原文の説明を表示しています。

Adds a new topic to CARLA's native ROS 2 interface — a publisher (BasePublisher + PublisherImpl, topic suffix, QoS, registration in ROS2::GetOrCreateSensor, a ProcessDataFrom* entry point and its call site in the UE4 plugin) or a subscriber that lets ROS drive an actor. Also covers adding a middleware (RMW) behind IPublisherMiddleware. Use when the user asks to "publish X to ROS from CARLA", "add a ROS topic/publisher/subscriber", "make the obstacle/lane-invasion sensor publish", "add odometry to ROS", or "add another RMW".

日本語の概要は準備中です。原文の説明を表示しています。

Inspects and visualises a ROS-2-enabled CARLA server from Docker containers, with no local ROS 2 install — list/echo/rate-check topics (the "are the topics actually on the wire" check), run the bundled map-and-lidar demo stack (hero vehicle with camera/lidar/GNSS/IMU on autopilot), and open RViz2 with the lane-network preset. Use when the user asks to "check the ROS topics", "echo /carla/map", "is CARLA publishing to ROS", "visualise the lidar in RViz", "open rviz", or "run the ROS 2 demo".

日本語の概要は準備中です。原文の説明を表示しています。

Loads, reloads, and reshapes the map on a running CARLA server via the Python API — get_available_maps, load_world and reload_world (with or without resetting world settings), generate a world from an OpenDRIVE .xodr, and load/unload map layers. Use when the user asks to "load a map", "change the town", "reload the world", "list available maps", "load an xodr/opendrive map", or "load/unload map layers", and when settings (sync mode, fixed delta) must survive the switch.

日本語の概要は準備中です。原文の説明を表示しています。

Inspects a recorded CARLA .log without replaying it — show_recorder_file_info for the header/actors/frames, collision queries between actor categories, and blocked-actor queries for vehicles that got stuck. Use when the user asks to "what's in this recording", "show recorder info", "which vehicles collided", "find collisions in the log", or "which actors were blocked/stuck".

日本語の概要は準備中です。原文の説明を表示しています。

Listens to a CARLA sensor and either saves its data to files, shows it live in a window, prints a one-shot summary, or (ros-info) reports the native ROS 2 topics, QoS and enabled-for-ROS state so you can echo it from ROS instead. Cameras save as PNG (depth/semantic auto-colourised) and display in a pygame window; lidar saves as .ply and shows as a top-down scatter; IMU/GNSS/radar/collision stream to JSONL or the console. Use when the user asks to "show/view the camera", "display the lidar", "save the sensor data / capture a dataset", or "what is this sensor reading". Select the sensor by id, type, or the actor it's attached to.

日本語の概要は準備中です。原文の説明を表示しています。

Lists and toggles a map's static environment objects via get_environment_objects / enable_environment_objects — hide or show buildings, vegetation, poles, fences, traffic signs and other baked assets by CityObjectLabel (and optional name filter). Use when the user asks to "hide/remove the buildings", "turn off the trees/vegetation", "show only the roads", "disable the fences", or "list the environment objects". Affects rendering and collision; resets on map reload.

日本語の概要は準備中です。原文の説明を表示しています。

Adds a new ROS 2 message type to CARLA's native ROS 2 interface — the hand-written POD struct under LibCarla/source/carla/ros2/types/msg, its Fast-CDR serialize/deserialize pair, the RIHS01 type hash computed in Docker, the CdrTopicInfo registration and the type-hash test. Use when the user asks to "add a ROS message type", "support sensor_msgs/X in CARLA", "add a carla_msgs type", "why is my type hash warning appearing", or needs a message CARLA does not publish yet. There is no IDL codegen — every step is manual.

日本語の概要は準備中です。原文の説明を表示しています。

Runs a route through ScenarioRunner's RouteScenario mode (--route / --route-id) with an autonomous agent driving the ego — the same mechanism the CARLA Leaderboard uses, and the only way to reach the ~34 route-only scenario classes (Accident, ParkedObstacle, HazardAtSideLane, InvadingTurn, HardBreakRoute, YieldToEmergencyVehicle, junction and actor-flow scenarios). Inspects route files, lists route ids and their scenarios, and runs one or all of them. Use when the user asks to "run a route", "drive a route with my agent", "run leaderboard scenarios without the leaderboard", or names a route-only scenario type.

日本語の概要は準備中です。原文の説明を表示しています。

Cooks and packages CarlaUE4 into distributable tarballs under Dist/ — either the full simulator or a standalone asset package of selected maps and props for later import. ROS2=1 keeps the native ROS 2 interface in the cooked package (a plain cook silently drops it). Use when the user asks to "package CARLA", "make a Dist build", "cook the project", "export a map as a package", "package CARLA with ROS2", or needs a build with working camera and lidar sensors.

日本語の概要は準備中です。原文の説明を表示しています。

Reads and sets the weather on a running CARLA server via get_weather/set_weather, and turns natural-language weather requests ("heavy rain at sunset", "light fog at night", "clear noon", "dust storm") into exact WeatherParameters — cloudiness, precipitation, puddles, wind, fog, sun position, wetness, dust. Use when the user asks to "set/change the weather", "make it rainy/foggy/sunny/night", "apply a weather preset", or describes any sky/lighting condition.

日本語の概要は準備中です。原文の説明を表示しています。

Replays a CARLA .log recorded by the recorder — the whole run or a time window, at any speed, following a chosen actor, optionally regenerating sensors and restoring weather. Use when the user asks to "replay the recording", "play back the run", "watch it again in slow motion / at 2x", "follow vehicle N during replay", or "replay onto a different map".

日本語の概要は準備中です。原文の説明を表示しています。

Records a running CARLA simulation to a .log file via start_recorder/stop_recorder for later deterministic replay — capturing actor spawns, transforms, traffic-light states and animations (optionally velocities/controls). Use when the user asks to "record the simulation", "start/stop the recorder", "capture this run", or "save a scenario to replay later". Does NOT capture sensor images.

日本語の概要は準備中です。原文の説明を表示しています。

Drives a vehicle to a destination autonomously using CARLA's navigation agents (BasicAgent/BehaviorAgent/ConstantVelocityAgent), or plans a route between two points with GlobalRoutePlanner. The agent handles routing, obstacle avoidance and traffic-light obedience. Use when the user asks to "drive the ego to (x,y,z)", "navigate to the junction", "go to that location", "plan a route from A to B", or "make the car drive itself somewhere specific". Manual control is control-vehicle; autopilot roaming is control-traffic.

日本語の概要は準備中です。原文の説明を表示しています。

Reads and summarises ScenarioRunner output — the criteria pass/fail tables from --output/--file, the machine-readable --json and --junit result files, and the criteria JSON written alongside a --record recording — and runs the metrics module (metrics_manager.py) to compute custom measurements over a recorded run offline, without the simulator. Use when the user asks "did the scenario pass", "why did it fail", "summarise these results", "compare these runs", or wants distance/speed/lane metrics from a recording.

日本語の概要は準備中です。原文の説明を表示しています。

Writes a new ScenarioRunner scenario — a Python class deriving from BasicScenario with its behaviour tree assembled from srunner atomic behaviours and criteria, plus the XML config that gives it a town, ego spawn and parameters — and registers it so `--scenario MyScenario_1` works. Also covers adding a scenario to a route via --additionalScenario. Generates a working skeleton and validates it without a simulator. Use when the user asks to "create/write a new scenario", "add a custom scenario", "make my own traffic situation", or wants to extend the scenario library.

日本語の概要は準備中です。原文の説明を表示しています。

Explores a CARLA map's road network through the Map/Waypoint API — a natural-language rundown of the whole map ("give me the topology"), drawing the topology to confirm the modelled map matches the visible one, enumerating junctions to resolve phrases like "the 4-way junction in the middle", nearest-waypoint lane facts, and next/previous lane navigation. Use when the user asks about the map's layout, lanes, junctions, topology, or to locate/navigate specific map elements.

日本語の概要は準備中です。原文の説明を表示しています。

Visualises and validates a map's pedestrian navigation mesh by sampling walkable locations (get_random_location_from_navigation) and drawing them as debug points. Use when the user asks to "show/visualise the pedestrian navmesh", "check walkable areas", "validate pedestrian navigation after a map import", or "why won't my walkers move". Confirms the navmesh loaded and how far it covers.

日本語の概要は準備中です。原文の説明を表示しています。

Draws debug overlays in a running CARLA world via world.debug — points, lines, arrows, bounding boxes, and text strings, each with a colour and lifetime. Use when the user asks to "draw/mark/highlight a point or box in the world", "visualise a path/waypoints", "label a location", or "show something on the map for debugging". Shapes are an overlay, not actors.

日本語の概要は準備中です。原文の説明を表示しています。

Spawns and attaches sensors on a running CARLA server — cameras (rgb/depth/semantic/instance/optical-flow/normals), lidar, radar, IMU, GNSS, collision/lane-invasion/obstacle — to the ego or any actor, with a mount transform and blueprint attributes (resolution, fov, sensor_tick, lidar range/points, …). Also sets up native ROS 2 publishing (--ros to enable_for_ros, --ros-name/--ros-frame-id topic and TF naming) and prints the topics the sensor will publish. Use when the user asks to "add a camera/lidar/sensor", "put a dashcam on the ego", "attach a depth camera", "mount a sensor", or "publish a sensor to ROS". Prints the sensor id; read its data with the read-sensor skill.

日本語の概要は準備中です。原文の説明を表示しています。

Directly drives a specific vehicle on a running CARLA server — raw VehicleControl (throttle/steer/brake/reverse/hand-brake), Ackermann speed control, vehicle lights, opening/closing doors, and physics-control tuning; ros-info reports the native ROS 2 command topics (vehicle_control_cmd, ackermann_control_cmd) for the hero. Targets the ego by default. Use when the user asks to "drive/steer the car", "accelerate/brake/reverse", "set a target speed", "turn on the headlights/blinkers/brake lights", "open a door", "drive the car from ROS", or "change the vehicle's mass/drag/physics". This is manual control (autopilot off) — for TM-driven traffic use control-traffic.

日本語の概要は準備中です。原文の説明を表示しています。

Tunes the CARLA Traffic Manager that drives autopilot vehicles — global and per-vehicle speed, following distance, running lights/signs, lane-change behaviour, lane offset, TM-managed lights, deterministic seed, hybrid physics, and TM sync mode. Use when the user asks to "make the traffic faster/slower", "let cars run red lights", "keep more distance", "stop lane changes", "make traffic deterministic", or otherwise change how autopilot cars behave. For manually driving one car, use control-vehicle.

日本語の概要は準備中です。原文の説明を表示しています。

Controls the traffic-light actors on a running CARLA server — set a light green/red/yellow/off, freeze all lights (optionally all-green), set phase timing (green/yellow/red durations), and reset to the normal cycle. Target all lights, one by id, all in a junction, or the nearest. Use when the user asks to "make the light red", "freeze all lights green", "change the light timing", "turn the traffic lights off", or "reset the lights". This is the light actors, not the Traffic Manager (that's control-traffic).

日本語の概要は準備中です。原文の説明を表示しています。

Runs a single ScenarioRunner Python scenario (or a whole group) against a running CARLA server — FollowLeadingVehicle, ControlLoss, DynamicObjectCrossing, SignalizedJunctionLeftTurn and the rest of srunner/examples — in sync or async mode, with result output, recording and manual/agent control of the ego. Lists what is runnable on the checked-out branch and on the loaded map. Use when the user asks to "run a scenario", "test FollowLeadingVehicle", "list scenarios", "run a CARLA traffic scenario", or reports a scenario that is "not supported".

日本語の概要は準備中です。原文の説明を表示しています。