「skills」の検索結果

Use this skill when the user runs doca_dpa_hl_tracer to capture/decode DPA-side traces at the programming-events layer (kernel entry/exit, sync points, comm primitive calls, RDMA WR submission, completion drain) — picking TRACE vs CRIT, tuning the JSON config (file-size limits + file_size_limit_policy, thread priorities/cores), decoding against the matching DPA-side ELF, or diagnosing empty/noisy captures. Trigger even when the user does not explicitly mention "DOCA DPA tracer" or "high-level tracer" — typical implicit phrasings include "DPA kernel returns wrong result but host completions look clean", "kernel-entry to first-comm latency is huge", "RDMA WR to drain gap on the DPA", "trace file truncated mid-run", "TRACE doubled my DPA latency", or "tracer wrote a file but parser shows zero events". Refuse and route elsewhere for writing DPA kernels, DPA-Comms/DPA-Verbs programming, raw per-cycle DPA profiling, host-side doca-dpa debugging, or production DPA telemetry — those belong to other skills.

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill when the user is doing hands-on DOCA RDMI (RDMA Initiator) programming — picking doca-rdmi vs doca-rdma for an accelerator-initiated one-sided RDMA flow, standing up a doca_rdmi_connection or doca_rdmi_poster, attaching a doca_dpa_completion or doca_verbs_cq before doca_ctx_start(), retrieving the DPA-side handle for a DPA kernel, auditing whether a doca_rdmi_* symbol is EXPERIMENTAL on this DOCA, or debugging DOCA_ERROR_* returns from RDMI calls. Trigger even when the user does not say "DOCA RDMI" or "initiator" — implicit phrasings include "my DPA kernel needs to post RDMA writes to a remote responder", "DPA kernel sees no completions", "function not found on doca_rdmi_* at link time", "DOCA_ERROR_BAD_STATE from completion attach", or "the DPA posted but the work request never arrived". Refuse and route elsewhere for two-sided or host-CPU RDMA, the DPA programming model, GPU-side RDMA initiation, or general RDMA/IB/RoCE concepts — those belong to other skills.

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill when the user is measuring the host or DPU-CPU control-plane rate of a DOCA Flow pipeline with doca_flow_perf — picking a JSON policy from configs/, choosing the DPDK or DOCA backend, running the single-iteration smoke then the iterative eval loop, interpreting per-iteration CPU cycles and num_pushed / num_failed, or capturing the four-tuple (DOCA version, BlueField/firmware, JSON policy, worker/queue/burst config) that makes a Kops/sec number defensible. Trigger even when the user does not explicitly mention "doca-flow-perf" — typical implicit phrasings include "how many rules per second can my BlueField insert", "5-tuple hairpin rule rate", "Kops/sec for steering", "flow-perf number does not match release notes", "DPDK vs DOCA benchmark", or "rule-install variance too high". Refuse and route elsewhere for optimizing a live Flow app (doca-flow-tune), the DPA-offloaded path (doca-flow-dpa-perf), dataplane throughput or latency, or library-internal pipe semantics — those belong to other skills.

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill when the operator is driving the DOCA Socket Relay to bridge a socket-oriented host application onto a BlueField DPU peer without rewriting it — picking the deployment shape (in-process, sidecar, or BlueField service container), configuring the host-side socket and the DPU-side forwarding endpoint, walking the bind → connect → round-trip → admit-fleet smoke, or diagnosing a stuck/silent relay. Trigger even when the user does not explicitly mention "DOCA Socket Relay" — typical implicit phrasings include "move my socket app onto the BlueField without rewriting it", "host app gets ECONNREFUSED on the relay", "relay accepts the connection but bytes never arrive on the DPU side", "first round-trip works, the rest hang", "bridge an AF_UNIX (UDS) socket to a DPU peer over Comch", or "I want a sidecar that forwards my socket to the BlueField". Refuse and route elsewhere for the comch programming API, line-rate raw packet I/O via doca-eth, and DOCA install/bring-up — those belong to other skills.

日本語の概要は準備中です。原文の説明を表示しています。

WARNING: guides IRREVERSIBLE BlueField-4 hardware operations (PLDM firmware burns, ISO reflashes, power cycles, BMC factory resets); every mutating step is governed by doca-hardware-safety (window, rollback). BlueField-4 only: BlueField-3 bring-up is doca-bf3-deployment. Use this skill for BlueField-4 (BF4) day-1 platform bring-up from the BMC: installing the BlueField/DOCA bundle ISO onto the DPU (Grace, the Arm complex) over UEFI HTTP Boot, PXE, or Redfish Virtual Media; the PLDM firmware-update flow (BMC, NIC firmware, SBIOS, ERoT) via the Redfish UpdateService and pldmtool; and a Grace Ubuntu image with optional cloud-init. Trigger on BlueField-4/BF4 bring-up phrasings even without "BF4": {bring up my new BlueField-4}, {the BlueField ISO will not boot over HTTP from the BMC}, {attach BF4 virtual media via Redfish}, {BF4 firmware Task stuck at Running}, {prepare a BlueField-4 host: platform support, version alignment, safest first smoke test}. Application launch and library APIs belong to other skills.

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill when the user is invoking doca_flow_dpa_perf on DPA-capable hardware (ConnectX-7 minimum supported, ConnectX-8 recommended, or BlueField-3) to measure rule update / disable rates on the DPA-offloaded DOCA Flow path — picking the active / passive device split, choosing workload-shape axes (burst, queue, completion threshold, workers, hash pipe algo, PSL tables), or reading Kops/sec iteration stats and the optional self-test. Trigger even when the user does not explicitly mention "doca_flow_dpa_perf" or "DPA Provider" — typical implicit phrasings include "how fast can the DPA program path-selector entries", "baseline rule-update rate on ConnectX-8", "tool reports zero ops on my BlueField", "self-test sentinel never shows on tcpdump", or "is my BlueField-2 DPA-capable". Refuse and route elsewhere for the host / DPU-CPU Flow path (doca-flow-perf), Flow pipeline tuning (doca-flow-tune), writing doca-flow / doca-dpa applications, or DOCA install — those belong to other skills.

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill when the user is debugging any DOCA symptom — a build that won't compile, a link step that can't resolve a doca_* symbol, a runtime call returning DOCA_ERROR_*, a silent service or tool, or a stack trace / valgrind / core dump — and needs the layered ladder (install → version → build → link → runtime → program → driver), verbosity controls (--sdk-log-level, DOCA_LOG_LEVEL, the doca-{lib}-trace flavor), container-debug constraints, or how to capture state for a Developer Forum post. Trigger even when the user does not say "DOCA debug" — implicit phrasings include "undefined reference to doca_*", "how do I get more logs", "packets aren't reaching the wire", "doca_caps returned nothing", or "hugepages empty in the container". Refuse and route elsewhere for library-specific debug (Flow pipe trace, RDMA QP, Comch stats), env-class pkg-config or hugepages symptoms, the DOCA_ERROR_* taxonomy and lifecycle interpretation, and performance or incident-response work — those belong to other skills.

日本語の概要は準備中です。原文の説明を表示しています。

Running a DOCA-linked binary directly on the hardware, with no container or kubelet: on host x86 with a BlueField NIC over PCIe, or bare-metal on BlueField Arm. Use for launching and supervising it (direct, tmux, systemd), and when it "exits 1 right after launch", "systemd keeps restarting it", reports "no matching device on the BF", or the BlueField itself is unhealthy: "bfb-install exited 0 but DPU is dead", "ping 192.168.100.2 works but ssh fails", "host PFs aren't showing netdevs". Service containers under kubelet belong to doca-container-deployment. Covers PCI/NUMA/CPU/IRQ binding, co-tenant isolation (cgroup-v2/netns/numactl), a seven-layer error taxonomy, platform lifecycle (BFB install, RShim/TMFIFO, host PF rebind, post-BFB recovery) and a six-state BlueField lifecycle classifier. Destructive firmware burn / mlxconfig set requires explicit confirmation via doca-hardware-safety; library APIs, env prep, and build use other skills.

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill when the user is doing hands-on DOCA GPUNetIO programming — wiring a CUDA kernel on an NVIDIA GPU to a doca-eth queue via doca_gpu_eth_rxq / doca_gpu_eth_txq, standing up the per-CUDA-device doca_gpu context, designing the persistent CUDA kernel that drains the GPU-visible queue, running the dual capability check (DOCA cap-query plus cudaGetDeviceProperties), registering cudaMalloc pools via doca_buf_arr_create_*, or debugging DOCA_ERROR_* returns from the GPUNetIO API. Trigger even when the user does not explicitly mention "DOCA GPUNetIO" or "persistent kernel" — typical implicit phrasings include "CUDA kernel reading packets directly from the NIC", "GPU-initiated networking on BlueField", "DOCA_ERROR_DRIVER on doca_gpu_create", "nvidia_peermem not loaded", "kernel-per-packet is too slow", or "which GPU supports GPU-side packet I/O". Refuse and route elsewhere for general CUDA programming, DOCA Ethernet queue bring-up, DOCA DPA, or DOCA install — those belong to other skills.

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill when the user is doing hands-on DOCA Flow DPA Provider work — exporting a `doca-flow` pipe or external resource (index-selector/memory) into BlueField DPA address space so a DPACC-built kernel can read counters, mutate hash-pipe entries, and update/read memory or index-selector resources inline with Flow. Covers per-port `doca_flow_dpa_ctx`, three queue types (general/resources-write/resources-read), the order-sensitive export handshake (`_export_prepare` → add entries → `_export` → `_get_device_addr`), and DPA-side device API. Trigger even when the user does not say "DOCA Flow DPA Provider" — implicit phrasings include "DPA kernel never sees entries in the exported pipe", "BAD_STATE from `_pipe_export`", "how do I disable a hash entry from a DPA kernel", "DPA memory read returns no value", or "DPA-side post keeps returning AGAIN". Refuse and route elsewhere for `doca-flow` pipe construction, generic host-side DPA (`doca-dpa`), or DPA-side kernel-writing — those belong to other skills.

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill to locate authoritative NVIDIA DOCA information without the source tree: the docs.nvidia.com page for a library/service/tool, which DOCA libraries are installed and at what version, a sample on disk or GitHub, a path under /opt/mellanox/doca, or a 404'd/renamed doc URL. Activate on implicit phrasing only when the conversation already names DOCA, BlueField, ConnectX, or /opt/mellanox. Do not activate for generic 'which version is installed' or 'where is the sample' questions with none of that context. Refuse and route elsewhere for hands-on programming, env prep, API tutorials, or hardware/firmware mutation — those belong to doca-programming-guide, doca-setup, the per-library skills, and doca-hardware-safety.

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill when the user is tuning a live or captured `doca-flow` pipeline with `doca_flow_tune` — snapshotting pipe / counter / KPI state, picking a tuning axis (rule placement, resource hints / table sizing, HW-offload mode) and a matching measurement (rule-install rate, lookup latency, hardware-counter delta), running offline or online (read-only or state-changing) modes, reading the dumper CSV / analyze JSON / visualize mermaid, or applying a recommendation back into the Flow program. Trigger even when the user does not explicitly mention "doca_flow_tune" — typical implicit phrasings include "Flow rule-install rate is low on BlueField", "table sizing looks wrong for this pipe", "tune visualize step is empty", "before/after counters don't move", or "which doca-flow knob does this recommendation hit". Refuse and route elsewhere for measuring baseline numbers (doca-flow-perf, doca-flow-dpa-perf), writing the doca-flow application, DOCA install, or streaming Flow telemetry — those belong to other skills.

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill when the user is doing hands-on DOCA DMA programming — bringing up a doca_dma context, configuring the single doca_dma_task_memcpy task type, sizing buffers via the doca_dma_cap_task_memcpy_* queries, setting LOCAL_READ_ONLY / LOCAL_READ_WRITE permissions on source / destination doca_mmap regions (plus doca_mmap_export_* for cross-peer copies), driving the progress engine, or debugging DOCA_ERROR_* returns. Trigger even when the user does not explicitly mention "DOCA DMA" or "doca_mmap" — typical implicit phrasings include "memcpy host buffer to BlueField without using the CPU", "offload a bulk copy to the DPU", "copy returns NOT_PERMITTED on first submit", "buffer too big for one DMA task", "task submitted but no completion", or "scatter-gather copy between two memory regions". Refuse and route elsewhere for cross-network copies (DOCA RDMA), producer/consumer messaging (DOCA Comch), DOCA Core / progress-engine internals, or DOCA install — those belong to other skills.

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill for hands-on DOCA GPI programming — wiring a GPU-Packet-Initiator context so a CUDA kernel drives RDMA queues directly from GPU memory without host CPU mediation. Covers picking GPI vs doca-gpunetio, the doca_gpi / domain / channel object model, the GPU-side handle handoff (doca_gpu_gpi_channel*), attaching GPU memory to a GPI domain, the domain and channel attribute objects, and debugging DOCA_ERROR_* from doca_gpi_* calls. Trigger even when the user does not explicitly mention "DOCA GPI" — implicit phrasings include "my CUDA kernel needs to post RDMA directly from GPU memory", "DOCA_ERROR_* from doca_gpi_gpu_channel_get", "how do I hand a GPU handle to my CUDA kernel", "how many channels can a GPI domain hold", or "GPU kernel driving RDMA without the host CPU on the path". Refuse and route elsewhere for the doca-gpunetio Send/Receive surface, the doca-rdma queue lifecycle, DPA-side initiation (doca-rdmi), or the CUDA programming model — those belong to other skills.

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill when the user is doing hands-on DOCA SHA programming — offloading SHA-1, SHA-256, or SHA-512 hashing onto a BlueField DPU or ConnectX accelerator, picking between one-shot `doca_sha_task_hash` and incremental `doca_sha_task_partial_hash`, querying `doca_sha_cap_*` for algorithm support and min destination / max source buffer sizes, setting source / destination `doca_mmap` permissions, or decoding DOCA_ERROR_* returns from the SHA API. Trigger even when the user does not explicitly mention "DOCA SHA" or "doca_sha_task" — typical implicit phrasings include "hash a multi-GiB file on the DPU", "offload SHA-256 to the BlueField", "streaming hash over chunks", "partial hash returns BAD_STATE", "destination buffer too small for digest", or "is SHA-512 available on this card". Refuse and route elsewhere for general cryptographic-hash theory (collision resistance, SHA-3 selection), other DOCA crypto libraries (AES-GCM, Compress, DMA), or DOCA install / BFB bring-up — those belong to other skills.

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill when the user is operating the DOCA Firefly Service container on BlueField — picking the four PTP configuration axes (role / profile / domain / interface), wiring the BlueField PHC + host follower + consumer workload pairing, deciding whether PTP-grade time is even needed (vs. chrony / NTP), or debugging a Firefly deployment where PTP isn't syncing or the host clock isn't following. Trigger even when the user does not explicitly mention "DOCA Firefly" or "PTP" — typical implicit phrasings include "container green but PTP never advances past LISTENING", "Firefly says synced but the host clock still drifts", "sync acquired but offset is tens of microseconds", "my Rivermax SMPTE workload needs PTP", or "is chrony good enough". Refuse and route elsewhere for installing DOCA, host-side chrony / ptp4l config bodies, PTP topology / boundary-clock design, building DOCA apps that read the disciplined PHC, or other DOCA services (DMS, Flow-Inspector, HBN) — those belong to other skills.

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill when the user is dealing with the DOCA environment around their workload — verifying an install is healthy, preparing the build env (pkg-config, headers, LD_LIBRARY_PATH, hugepages, devlink, representors), debugging env-class failures, deciding container-vs-bare-metal deployment shape, or reaching a DOCA install from a host that doesn't have one yet via the NGC DOCA container Stage-1 fallback. Trigger even when the user does not explicitly mention "DOCA setup" — typical implicit phrasings include "just got a BlueField, what now", "code is built, how to run it", "pkg-config can't find doca-flow", "no free 2048 kB hugepages", "representor X not found", "on a Mac and want to learn DOCA". Refuse and route elsewhere for library API specifics (Flow pipes, RDMA queues), the modify-a-sample first-app workflow or DOCA_ERROR_* program-side debugging, and "where is X documented" knowledge-map questions — those belong to other skills.

日本語の概要は準備中です。原文の説明を表示しています。

Create new skills, modify and improve existing skills, and measure skill performance. Use when users want to create a skill from scratch, edit, or optimize an existing skill, run evals to test a skill, benchmark skill performance with variance analysis, or optimize a skill's description for better triggering accuracy.

日本語の概要は準備中です。原文の説明を表示しています。

将图文/视频内容自动发布到小红书（XHS），并支持登录检查、内容检索与互动操作。 适用场景：发布图文、发布视频、仅启动测试浏览器、获取登录二维码、首页推荐抓取、搜索笔记、评论互动、抓取内容数据。

日本語の概要は準備中です。原文の説明を表示しています。

Golang project layout and workspace setup — cmd/internal/pkg directory conventions, module and package naming, go.work workspaces, and essential configuration files. Use when starting a new Go project, organizing an existing codebase, setting up a monorepo with multiple packages, creating CLI tools with multiple main packages, or discussing package restructuring, package splits, or module splits. Not for restructuring existing code without a layout change (→ See `samber/cc-skills-golang@golang-refactoring` skill).

日本語の概要は準備中です。原文の説明を表示しています。

Implements dependency injection in Golang using uber-go/dig — reflection-based container, Provide/Invoke, dig.In/dig.Out parameter and result objects, named values, value groups, optional dependencies, scopes, and Decorate. Apply when using or adopting uber-go/dig, when the codebase imports `go.uber.org/dig`, or when wiring an application graph at startup. For higher-level lifecycle and modules, see `samber/cc-skills-golang@golang-uber-fx` skill.

日本語の概要は準備中です。原文の説明を表示しています。

Golang benchmarking, profiling, and performance measurement. Use when writing, running, or comparing Go benchmarks, profiling hot paths with pprof, interpreting CPU/memory/trace profiles, analyzing results with benchstat, setting up CI benchmark regression detection, or investigating production performance with Prometheus runtime metrics. Also use when the developer needs deep analysis on a specific performance indicator - this skill provides the measurement methodology, while `samber/cc-skills-golang@golang-performance` provides the optimization patterns.

日本語の概要は準備中です。原文の説明を表示しています。

Golang ecosystem watch list — official sources (go.dev/blog, pkg.go.dev, tour.golang.org, golang-nuts), newsletters (Golang Weekly, Awesome Go Newsletter), communities (r/golang, gophers.slack.com, Go Forum, go.dev/wiki), blogs (Dave Cheney, Ardan Labs, Rob Pike), YouTube channels (Gopher Academy, GopherCon EU/UK), conferences, and Go contributors to follow on GitHub, X and Bluesky. Use when seeking Golang learning resources, discovering new libraries or tools, finding community channels or meetups, picking Go people to follow, or keeping up with Go language changes and releases. Not for querying a specific module's versions, docs, or vulnerabilities from the CLI (→ See `samber/cc-skills-golang@golang-pkg-go-dev` skill).

日本語の概要は準備中です。原文の説明を表示しています。

Modernize Golang code to use recent language features, standard library improvements, and idiomatic patterns. Use when reviewing Go code with old-style patterns, when encountering a deprecation warning, or when the user asks for modernization, a Go version upgrade (e.g. to Go 1.27), or a CI/tooling refresh. Not for structural refactors, extracting functions, or moving code between packages (→ See `samber/cc-skills-golang@golang-refactoring` skill).

日本語の概要は準備中です。原文の説明を表示しています。