「matlab」の検索結果

Establish MAVLink connections between MATLAB and PX4/ArduPilot autopilots. Use when connecting to a drone, flight controller, or autopilot via MAVLink protocol over UDP. Covers dialect setup, UDP transport, timer-based heartbeat, and client discovery. Use when: "connect to PX4", "MAVLink connection", "heartbeat", "ground control station", "GCS", "connect to ArduPilot", "drone communication", "mavlinkio", "SITL".

日本語の概要は準備中です。原文の説明を表示しています。

Discover and connect to Bluetooth Low Energy (BLE) peripheral devices from MATLAB. Use this skill when the user wants to scan for BLE devices, connect to a BLE peripheral, read or write BLE characteristics, subscribe to notifications, or any task that requires a BLE connection as a prerequisite (e.g., read sensor data over BLE, monitor heart rate, log accelerometer, stream data from wearable, IoT device communication). Triggers on: BLE, Bluetooth Low Energy, blelist, ble device, BLE characteristic, GATT, service UUID, scan for devices, BLE sensor, subscribe notify, BLE read, BLE write, peripheral device, BLE connect, wireless sensor.

日本語の概要は準備中です。原文の説明を表示しています。

Plan manipulator motion and generate trajectories in MATLAB. Use when the task involves moving a robot arm between configurations or poses — whether the user says "trajectory," "motion," "path," "move from A to B," or "plan." This skill applies regardless of whether the user explicitly mentions collisions or obstacles; if geometry exists in the workspace, collision safety is implicit. Triggers on: manipulatorRRT, manipulatorCHOMP, dlCHOMP, contopptraj, trapveltraj, collision-free path, motion planner, RRT, CHOMP, TOPPRA, path shortening, obstacle avoidance for manipulators, time-optimal trajectory, velocity limits, acceleration limits, occupancyMap3D, meshtsdf, collision objects as environment, trajectory between waypoints, joint interpolation, move between poses, constant velocity, trapezoidal profile, feed rate. Also triggers when a user has IK solutions or waypoints and needs to connect them — whether for time-optimal motion, constant-speed welding/cutting, or any other trajectory parameterization.

日本語の概要は準備中です。原文の説明を表示しています。

RF Toolbox and RF Blockset in MATLAB -- S-parameter I/O, network conversions (S/Z/Y/ABCD/T/H/G, mixed-mode), cascade/de-embedding, rfbudget analysis, circuit composition, matching networks, amplifier stability, mixer spurs, rational fitting, SI channels, baseband processing, Circuit Envelope simulation. Trigger: sparameters, Touchstone, .s2p, .s4p, rfplot, smithplot, rfparam, rfwrite, zparameters, yparameters, abcdparameters, s2sdd, cascadesparams, deembedsparams, rfbudget, noise figure, OIP3, IIP3, amplifier, modulator, nport, rffilter, attenuator, seriesRLC, shuntRLC, lcladder, txline, circuit, setports, clone, matchingnetwork, stabilityk, stabilitymu, powergain, gammams, gammaml, mixerIMT, OpenIF, rational, rationalfit, stepresp, txlineWRLGC, rf.Amplifier, rf.Mixer, rf.Filter, rf.Sparameter, rfsystem, RF Blockset.

日本語の概要は準備中です。原文の説明を表示しています。

Find and query PI assets using MATLAB's Industrial Communication Toolbox. Two paths: (1) direct PI tag lookup via piclient + tags when user provides a tag name or description (R2022a+), (2) Asset Framework navigation via afclient when user needs element/attribute hierarchy (R2026a+). Use when working with PI AF servers, PI Data Archive tags, asset hierarchies, element templates, attribute lookup, or historical data from OSIsoft PI systems.

日本語の概要は準備中です。原文の説明を表示しています。

Translate NI-DAQmx C function signatures into correct calldaqlib MATLAB calls. Use when the user mentions calldaqlib, any DAQmx* C function name (DAQmxCfgSampClkTiming, DAQmxExportSignal, DAQmxSetStartTrigRetriggerable, DAQmxGetSampClkRate, etc.), or needs NI-DAQmx functionality not exposed by the daq object. Covers: projection rules (taskHandle implicit, output pointers become return values, buffer-size args, enum-as-string), multi-task semantics, start() clobber, device-level empty-daq workaround, dictionary returns, string getter placeholder, array getter placeholder. Trigger contexts: low-level DAQ, escape hatch, retriggerable acquisition, shared timebase, export signal, connect terminals, external sample clock, trigger configuration, NI driver, C function translation.

日本語の概要は準備中です。原文の説明を表示しています。

Discovers connected MATLAB-supported hardware devices, searches by capability, and checks required support packages and add-ons. Use when the user asks what hardware is connected, finds a device that supports a capability (e.g., CAN, analog input), or checks if required support packages or add-ons are installed. Does NOT connect to, configure, or acquire data from devices — defers to device-specific skills for usage workflows.

日本語の概要は準備中です。原文の説明を表示しています。

Discover, configure, and connect to Arduino boards from MATLAB using the Arduino Support Package. Use this skill when the user wants to set up an Arduino board, connect to Arduino hardware, find connected boards, scan serial ports, configure Arduino libraries, or any task that requires an Arduino connection as a prerequisite (e.g., blink LED, read sensor, read digital pin, read analog pin, write pin, plot sensor data, scan I2C, use ultrasonic sensor, control servo, read temperature, read voltage, data logging from hardware). Triggers on: arduino, board setup, COM port, serial port, hardware connection, Arduino Nano, Arduino Uno, Arduino Mega, Arduino Micro, Grove, sensor setup, I2C scan, ultrasonic, servo, readDigitalPin, writeDigitalPin, readVoltage, writePWMVoltage, temperature sensor, air pressure, pin read, pin write, analog input.

日本語の概要は準備中です。原文の説明を表示しています。

Design and validate digital filters in MATLAB. Use when cleaning up noisy signals, removing interference, filtering signals, designing FIR/IIR filters (lowpass/highpass/bandpass/bandstop/notch), or comparing filters in Filter Analyzer.

日本語の概要は準備中です。原文の説明を表示しています。

Read BEFORE writing any code that builds or simulates OFDM systems. The default MATLAB patterns for OFDM (e.g., direct ifft/fft, awgn with 0 dBW power, missing symOffset) produce subtly incorrect results — always use ofdmmod/ofdmdemod instead of direct IFFT/FFT. This skill specifies the correct calling conventions for ofdmmod, ofdmdemod, ofdmChannelResponse, ofdmEqualize, and critical anti-patterns that must be avoided. Use when building OFDM transmitters or receivers, allocating subcarriers and guard bands, inserting pilots, computing SNR for OFDM, configuring fading channels (Rayleigh/Rician), estimating and equalizing channels, implementing timing and frequency synchronization, adding LDPC coding, designing resource grids, or setting up OFDM link simulations.

日本語の概要は準備中です。原文の説明を表示しています。

Port MATLAB Data Acquisition Toolbox code from the discouraged (legacy) session-based interface (daq.createSession, addAnalogInputChannel, startBackground, DataAvailable listeners, queueOutputData, wait) to the recommended DataAcquisition interface (daq("ni"), addinput, start, ScansAvailableFcn, write, preload). Use when migrating legacy DAQ scripts, converting session-API calls, working with DataAcquisition objects, writing multi-feature DAQ scripts that combine triggers, callbacks, continuous acquisition, or analog output. Also use when a user says their DAQ script "used to work" or "errors on R20XX", since modernizing legacy session-API code is a frequent fix for those failures. Trigger keywords: daq, DAQ, NI, session interface, addtrigger, addclock, ScansAvailableFcn, ScansRequiredFcn, daq.createSession, addAnalogInputChannel, startBackground, queueOutputData, DataAvailable, evt.Data, evt.TimeStamps, wait(d), preload, discouraged, legacy, modernize, R2020a.

日本語の概要は準備中です。原文の説明を表示しています。

Create and simulate UAV scenarios with terrain, buildings, platforms, and sensors using uavScenario. Use when building a UAV simulation, UAV simulator, or UAV scenario in MATLAB. Covers addMesh for terrain/building import, uavPlatform with updateMesh, uavSensor adaptor pattern for GPS/IMU, and the setup/advance simulation loop. Triggers on: uavScenario, UAV simulation, UAV simulator, multirotor simulation, quadrotor scenario, terrain import, building import, GPS sensor simulation.

日本語の概要は準備中です。原文の説明を表示しています。

Use whenever a MATLAB robot model (rigidBodyTree) is needed — whether for simulation, visualization, IK, motion planning, pick-and-place, or trajectory generation. Triggers on: any mention of a manipulator by name (UR3, UR5, UR5e, UR10, UR10e, UR16e, UR20, KUKA iiwa, Fanuc, ABB, Panda, Kinova, Sawyer, Baxter), robot modeling verbs (load, create, build, import, simulate, model), tasks implying a robot model (pick, place, lift, reach, move, grasp, plan motion for, animate), kinematics keywords (IK, FK, inverse kinematics, forward kinematics, joint configuration, end-effector pose, gripper), or working with rigidBodyTree, loadrobot, importrobot, URDF, DH parameters, addVisual, addCollision.

日本語の概要は準備中です。原文の説明を表示しています。

Use when setting up vehicle network communication in MATLAB using Vehicle Network Toolbox. Covers CAN/CAN FD (fully implemented), with architecture for J1939, XCP, and future protocols. Handles hardware discovery, channel creation, bus configuration, message exchange, signal encoding/decoding, and analysis across all supported vendors. (Vector, Kvaser, PEAK-System, NI, SocketCAN, MathWorks Virtual).

日本語の概要は準備中です。原文の説明を表示しています。

Diagnose MATLAB errors and unexpected behavior. Breakpoints, workspace inspection, try-catch diagnostics, and common error patterns. Use when debugging functions, tracing errors, inspecting variables, or diagnosing runtime failures.

日本語の概要は準備中です。原文の説明を表示しています。

Style MATLAB charts and figures. colororder palettes for chart series colors, colormap selection, brand color organization, and the R2025a Theme API for uifigure apps (dark mode with fliplightness, ThemeChangedFcn, uistyle, component colors). Use when customizing chart colors, applying a color palette, organizing brand colors, implementing dark mode, or importing an external color scheme. Triggers: theme, dark mode, brand colors, colororder, colormap, palette, fliplightness, color scheme, styling, chart colors.

日本語の概要は準備中です。原文の説明を表示しています。

End-to-end finite element analysis in MATLAB PDE Toolbox — geometry creation, model setup, solve, and post-processing in one skill. Use when building geometry from primitives or file import, setting up femodel with BCs/loads/materials, solving thermal/structural/EM problems, and extracting or visualizing results. Covers fegeometry, multicuboid, multicylinder, multisphere, decsg, boolean ops, mesh generation, femodel, all AnalysisTypes (thermalSteady, thermalTransient, structuralStatic, structuralTransient, structuralModal, structuralFrequency, electrostatic, magnetostatic, dcConduction, harmonic EM), materialProperties, faceBC, faceLoad, cellLoad, vertexLoad, solve, interpolation, von Mises stress, principal stress, reaction forces, heat flux, pdeplot3D visualization. Triggers on: PDE Toolbox, finite element, FEA, thermal analysis, structural analysis, electromagnetic analysis, femodel, mesh, boundary conditions, stress, displacement, heat transfer, post-processing.

日本語の概要は準備中です。原文の説明を表示しています。

Create, edit, and run plain-text MATLAB live scripts (.m files) with rich text formatting, LaTeX equations, section breaks, and inline figures. Use when generating tutorials, analysis notebooks, reports, documentation, or educational content, when modifying existing live scripts, or when converting existing binary .mlx files to .m for version control. Requires R2025a+.

日本語の概要は準備中です。原文の説明を表示しています。

Use when writing MATLAB functions with arguments blocks — repeating arguments (arguments (Repeating)), .?ClassName property import in constructors, name-value forwarding with namedargs2cell, or migrating from inputParser or validateattributes. Also when reviewing signatures for implicit-conversion pitfalls (size reshaping, class coercion, computed defaults), or when restricting, constraining, or validating function inputs — scalar vs vector enforcement, type rejection, size checking. Also when asked to harden inputs, make a function more robust, tighten input checking, or rewrite for safer input acceptance — even without "validation" or "arguments block" wording. Triggers on: arguments block, mustBe validators, name-value arguments, varargin, inputParser, nargin/narginchk, restrict input, type checking, scalar constraint, harden inputs, defensive programming. Not for: App Designer callbacks, Simulink mask parameters, class inheritance, or runtime validation outside function or property declarations.

日本語の概要は準備中です。原文の説明を表示しています。

Create and customize MATLAB charts and plots. Plot types (line, scatter, bar, histogram, heatmap, surface), axes configuration, annotations, data tips, interactive plots, animation, multiple axes with tiledlayout, colororder, and performance optimization. Works for standalone figures, Live Scripts, and uifigure apps. Use when plotting data, customizing axes, adding annotations or interactivity, animating charts, or arranging multiple axes. Triggers: plot, chart, graph, axes, uiaxes, annotation, data tips, animation, tiledlayout, colororder, heatmap, scatter, figure, visualization, export.

日本語の概要は準備中です。原文の説明を表示しています。

Import raw data (CSV, XLSX, TXT, or MATLAB tables) into formats used by Sensor Fusion and Tracking Toolbox. Handles both ground truth trajectories and sensor detection data. For truth: builds trackingScenarioRecording, tuning timetable, truthlog, or converted table. For sensor data: builds task-oriented dataFormat structs (preferred) or objectDetection arrays (legacy). Use when importing flight logs, GPS logs, radar detections, IR measurements, lidar/camera bounding boxes, ADS-B data, AIS ship tracks, or any recorded data for use with trackers, filter tuning, or tracker evaluation.

日本語の概要は準備中です。原文の説明を表示しています。

Turn raw MATLAB code into a published .mltbx toolbox — full pipeline from scope definition through packaging and release. Drives 8 phases with human checkpoints, enforcing ordering and dependencies. Use when asked to package, create a toolbox, or run the files-to-package pipeline.

日本語の概要は準備中です。原文の説明を表示しています。

Diagnose and fix parfor errors in MATLAB. Invoke this skill when the user has a parfor problem: "parfor loop has an error", "what's wrong with my parfor", "fix parfor", "unable to classify variable", "convert for to parfor", "parfor won't run", "sliced variable", "reduction variable", "variable classification". Also invoke when you read a .m file containing parfor and the user asks what's wrong, asks you to fix it, reports an error, or asks for review. Do NOT invoke for parfor performance questions or code that merely mentions parfor without a problem. ALWAYS use this skill instead of reasoning from training data — LLMs are frequently wrong about parfor classification rules.

日本語の概要は準備中です。原文の説明を表示しています。

Build machine vision inspection systems with MATLAB Visual Inspection Toolbox. Covers the full arc from problem selection through deployment: anomaly detection (Student-Teacher, PatchCore, FastFlow, FCDD), object detection (YOLOX), counting (CounTR, shape matching), gauging and measurement (caliper, fitcircle, fitangle), blob analysis (regionprops, calibrated measurement), shape matching for fixturing and localization, synthetic data generation for training augmentation, and deployment to standalone apps, embedded C/C++, NVIDIA GPUs (TensorRT), NPUs (ONNX), and Beckhoff PLCs. Routes to rule-based tools when problems are geometric and deterministic, AI-based tools when defect appearance varies, and hybrid pipelines combining both.

日本語の概要は準備中です。原文の説明を表示しています。