8,953 件 ・ 関連度順
概要と使いどころ
Check that a form actually rejects bad input: the error message renders, the submit button stays disabled, and no request goes out. Use when validation logic was written but never driven, when a "required" or pattern check looks right on screen but was never proven, or when a bug report says the form submitted invalid data anyway.
日本語の概要は準備中です。原文の説明を表示しています。
Statically analyze a Simulink model for Rapid Accelerator (raccel) mode incompatibilities. Identifies unsupported blocks (Interpreted MATLAB Function, Level-2 S-Functions without TLC), configuration issues, and data type restrictions that prevent code generation. Classifies each issue as BLOCKER (build error) or WARNING (build warning). Use BEFORE calling sim() in rapid-accelerator mode, when buildRapidAcceleratorTarget fails, or when the user asks "why won't my model run in raccel?" TRIGGER: any request explicitly involving rapid accelerator mode, raccel, raccel build errors, or buildRapidAcceleratorTarget failures.
日本語の概要は準備中です。原文の説明を表示しています。
Specify plant models for closed-loop simulation: system specs, architecture, build plans, validation plans. Use when creating, updating, or reviewing plant model specifications, planning plant model architecture, or planning plant model validation.
日本語の概要は準備中です。原文の説明を表示しています。
Add, configure, and manage faults on Simulink, Simscape, and System Composer model signals for robustness analysis and safety validation. Use when injecting faults (stuck, noise, gain, offset) onto block inports/outports, enabling fault simulation, or analyzing fault effects. Covers sensor failures, signal corruptions, actuator faults, FMEA validation, and robustness testing. Requires Simulink Fault Analyzer.
日本語の概要は準備中です。原文の説明を表示しています。
Microsoft.Extensions.Options patterns including IValidateOptions, strongly-typed settings, validation on startup, and the Options pattern for clean configuration management.
日本語の概要は準備中です。原文の説明を表示しています。
Infer or annotate TCR antigen specificity by unsupervised clustering (TCRdist/tcrdist3, GLIPH2, clusTCR, GIANA) and database lookup (VDJdb, IEDB, McPAS-TCR), and rank candidates with supervised predictors (ERGO-II, NetTCR-2.x, pMTnet) under explicit caveats. Encodes the central truth that general TCR-epitope prediction for UNSEEN epitopes essentially does not work (collapses to near-random; IMMREP22, Grazioli 2022) because labeled data is dominated by a few immunodominant epitopes and there is no true negative set — so clustering for discovery is the honest task and de-novo binding needs wet-lab validation. Use when annotating TCR specificity or grouping a repertoire. Epitope/MHC context lives in mhc-binding-prediction.
日本語の概要は準備中です。原文の説明を表示しています。
Predict peptide-MHC class I binding and natural presentation with MHCflurry, NetMHCpan-4.1, and MixMHCpred to nominate candidate CD8 T-cell epitopes. Covers the binding-affinity (BA) vs eluted-ligand (EL/presentation) distinction, why %Rank beats raw nM for cross-allele work, the MS abundance bias that misranks low-expression neoantigens, allele-coverage inequity, and length bias. Use when scanning a protein or peptide set for class I epitopes, scoring neoantigen candidates, or choosing a binding predictor. For CD4/HLA class II see mhc-class-ii-prediction.
日本語の概要は準備中です。原文の説明を表示しています。
Rank and prioritize neoantigen/epitope candidates by likely T-cell response using NeoFox feature annotation, PRIME2.0, BigMHC-IM, the Łuksza/Balachandran fitness model (agretopicity + foreignness), and pVACtools tiering. Encodes the field's hard truths that immunogenicity is the least-solved layer (dedicated scores ~AUROC 0.6-0.7, modest PPV), that scores are valid only for RANKING within one patient (never absolute go/no-go or cross-patient), that DAI has anchor-inflation and WT-denominator traps, and that stacking weak correlated scores into one number is a red flag. Use when ordering a candidate list for a vaccine. Binding lives in mhc-binding-prediction; calling in neoantigen-prediction.
日本語の概要は準備中です。原文の説明を表示しています。
Handles BED-format genomic intervals (BED3 through BED12, narrowPeak/broadPeak) and the coordinate-system substrate the whole interval category rests on, with bedtools (CLI) and pybedtools/pyranges/pandas (Python). Covers the 0-based half-open vs 1-based-closed convention boundary and the start-1/end-unchanged conversion, the silent failures (chrom-name mismatch, CRLF, lexicographic-vs-version sort under -sorted), genome/chrom.sizes generation, sorting contracts, BED12 block invariants, validation, makewindows, cross-assembly liftover (liftOver/CrossMap), and BED<->VCF/BAM/FASTA conversion. Use when reading, creating, validating, sorting, lifting between genome builds, or converting interval files, preparing inputs for bedtools/tabix/bigBed, or debugging an off-by-one or empty-overlap result.
日本語の概要は準備中です。原文の説明を表示しています。
Calls m6A peaks from MeRIP-seq / m6A-seq paired IP-vs-input data using exomePeak2 (transcript-aware, GC-bias-corrected Poisson GLM), MeTPeak (HMM over sliding windows), MACS3/MACS2 with --nomodel --broad --keep-dup all (genome-wide broad alternative), and DRACH motif enrichment via HOMER or ggseqlogo as a sanity check (NOT a filter). Covers BED12 vs narrowPeak output, exonic vs intronic peak handling, multi-tool reconciliation (intersection vs union), the m6A-vs-m6Am ambiguity at 5'UTR peaks that antibody methods cannot resolve, and orthogonal validation (miCLIP/GLORI/m6A-SAC-seq/m6Anet). Use when calling peaks from paired IP/input genome BAMs, choosing exomePeak2 (transcript-aware default) vs MACS3 (broad genomic) vs MeTPeak (HMM-smoothed low-coverage), confirming DRACH enrichment as a sanity check on the peak set, reconciling differing peak sets across tools, validating MeRIP peaks against single-base methods, interpreting 5' peaks where m6Am contamination is possible, or recommending a consensus strategy.
日本語の概要は準備中です。原文の説明を表示しています。
Cross-method decision tree for calling hits in pooled CRISPR screens. Catalogs statistical models (MAGeCK RRA, MAGeCK MLE, BAGEL2, drugZ, JACKS, Chronos, CERES), experimental designs each is built for, failure modes outside design domain, reconciliation when methods disagree, multiple-testing and effect-size thresholds, the order of operations (count -> QC -> CN-correct -> hit-call -> validate), the second-best-sgRNA conservative rule, and consensus-hit strategy. Use when choosing among MAGeCK / BAGEL2 / drugZ / JACKS / Chronos for a given design, reconciling disagreement across two or three methods on the same screen, deciding whether to require consensus, gating downstream validation by hit-confidence tier, or interpreting unstable hit lists across reruns.
日本語の概要は準備中です。原文の説明を表示しています。
Discover RBP binding motifs from CLIP-seq peaks or single-nucleotide crosslink sites using HOMER, MEME/STREME, kpLogo, mCross (CL-position-registered motifs), PEKA (positional k-mer enrichment), RBPamp (affinity), and RNA Bind-n-Seq (RBNS) cross-validation. Use when characterizing RBP sequence specificity, registering motifs to crosslink positions, validating in vivo CLIP motifs against in vitro RBNS Kd, reconciling motif disagreements across tools, or correcting for the uracil crosslinking bias that contaminates raw CLIP motif logos.
日本語の概要は準備中です。原文の説明を表示しています。
Validates docked / generated protein-ligand poses using PoseBusters physical-validity tests, strain energy quantification, geometric checks (planarity, vdW overlap, bond/angle distortion), and pose-energy reasonableness. Use when QC-ing docking results, comparing classical vs ML docking outputs, or filtering pose lists before SAR analysis.
日本語の概要は準備中です。原文の説明を表示しています。
Normalizes ChIP-seq data using exogenous spike-in (ChIP-Rx with Drosophila chromatin per Orlando 2014 / Egan 2016; E. coli carryover for CUT&RUN/CUT&Tag). Distinguishes RRPM from Rx-Input scaling, integrates with DiffBind / DESeq2 / edgeR / csaw via sizeFactors and DiffBind library-size vectors, applies the Patel et al 2024 *Nat Biotechnol* failure-mode framework, and validates that normalization is applied at the read level (not peak counts). Use when global signal shifts are expected (HDACi, BETi, EZH2i, dosage, target knockdown), when ChIPseqSpikeInFree detects post-hoc shifts, or when validating internal-control regions before publication.
日本語の概要は準備中です。原文の説明を表示しています。
Performs alchemical free-energy calculations including relative binding free energy (RBFE / FEP+) and absolute binding free energy (ABFE) via OpenFE, FEP+, GROMACS, AMBER pmemd, and OpenMM with explicit lambda scheduling, soft-core potentials, MBAR/BAR analysis, cycle-closure validation, and protocol-appropriate enhanced sampling. Compares ML alternatives (Boltz-2 affinity, DeepDock). Use when ranking analogs by binding affinity beyond docking accuracy, performing prospective lead optimization, or validating SAR predictions.
日本語の概要は準備中です。原文の説明を表示しています。
Maps GWAS-implicated loci to candidate effector (causal) genes by integrating variant-to-gene (V2G) features via Open Targets L2G (Mountjoy 2021), MAGMA gene-based association (de Leeuw 2015), FUMA SNP2GENE, cS2G combined SNP-to-gene scores (Gazal 2022), Polygenic Priority Scores (PoPS, Weeks 2023), FLAMES, INQUISIT, DEPICT, and enhancer-gene predictors (ABC, ENCODE-rE2G). Use when narrowing a GWAS lead locus to a candidate causal gene, picking between proximity, eQTL-based, and similarity-based prioritizers, integrating multi-evidence streams (fine-mapping, colocalization, ABC enhancer-gene, distance, chromatin), reconciling discordant L2G vs PoPS calls, prioritizing tissue-specific eQTL evidence, or triangulating across at least three independent lines of evidence for a publication-grade effector-gene nomination.
日本語の概要は準備中です。原文の説明を表示しています。
Validate alignment quality with insert size distribution, proper pairing rates, GC bias, strand balance, and other post-alignment metrics. Use when verifying alignment data quality before variant calling or quantification.
日本語の概要は準備中です。原文の説明を表示しています。
Use when the user mentions App Store screenshot validation, screenshot review, checking screenshots before submission, or verifying screenshot dimensions and content.
日本語の概要は準備中です。原文の説明を表示しています。
Use when the user provides 1-50 concrete bad-case search queries for one Viking Search app and wants local deterministic fixes. This skill only verifies request-level fine-operation interventions against a read-only baseline scene and delivers a console-ready configuration sheet, validated payloads, and a replay script. It must not mutate scenes, apps, dictionaries, datasets, recall core parameters, or online defaults.
日本語の概要は準備中です。原文の説明を表示しています。
Plan manipulator motion and generate trajectories in MATLAB. Use when the task involves moving a robot arm between configurations or poses — whether the user says "trajectory," "motion," "path," "move from A to B," or "plan." This skill applies regardless of whether the user explicitly mentions collisions or obstacles; if geometry exists in the workspace, collision safety is implicit. Triggers on: manipulatorRRT, manipulatorCHOMP, dlCHOMP, contopptraj, trapveltraj, collision-free path, motion planner, RRT, CHOMP, TOPPRA, path shortening, obstacle avoidance for manipulators, time-optimal trajectory, velocity limits, acceleration limits, occupancyMap3D, meshtsdf, collision objects as environment, trajectory between waypoints, joint interpolation, move between poses, constant velocity, trapezoidal profile, feed rate. Also triggers when a user has IK solutions or waypoints and needs to connect them — whether for time-optimal motion, constant-speed welding/cutting, or any other trajectory parameterization.
日本語の概要は準備中です。原文の説明を表示しています。
Guide authoring of Audio Toolbox plugins (audioPlugin, audioPluginSource) that pass validateAudioPlugin and generate deployable VST/AU code. Use when creating audio effect or generator plugins, writing classdef files inheriting from audioPlugin, or troubleshooting validateAudioPlugin failures.
日本語の概要は準備中です。原文の説明を表示しています。
Detect and validate GPU availability for MATLAB GPU computing. Use when the user can't use their GPU, or is setting up or selecting a GPU. Triggers on: gpuDevice, GPU setup, check GPU, GPU not found, GPU not working, can't use GPU, GPU not available, unable to find a supported GPU device, compatible GPU, canUseGPU, validateGPU.
日本語の概要は準備中です。原文の説明を表示しています。
Discover MATLAB Parallel Computing Toolbox clusters on the network and in the cloud, and manage their profiles — list, inspect, import, export, set default, validate, and delete. Use whenever the user asks what parallel computing resources, clusters, or cluster profiles they have or can use — e.g. "what parallel resources do I have", "show my cluster profiles", "list clusters", "what clusters can I run on", "where can I submit jobs" — and for any work with parcluster, parallel.listProfiles, parallel.defaultProfile, MJS / Generic / HPC Server / MJSComputeCloud clusters, .mlsettings files, or profile validation. Does NOT cover job submission, parpool, or parfor.
日本語の概要は準備中です。原文の説明を表示しています。
Read and write 3-D point cloud data using Lidar Toolbox file I/O. Covers PLY, PCD, LAS/LAZ, PCAP (Velodyne/Ouster/Hesai), E57, and IDC (Ibeo) formats. Use when loading point clouds from disk, saving to disk, choosing the correct reader or writer for a file format, extracting or preserving lidar point attributes, reading Ibeo IDC sensor recordings, or converting between formats.
日本語の概要は準備中です。原文の説明を表示しています。