「elo」の検索結果

Guidance for Tauri v2 daily development workflow, debugging, resources, sidecar usage, and testing strategies.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the 30-pin ESP32-WROOM-32 development board — the DOIT ESP32 DevKit V1 / ESP32 CH340 Type-C / NodeMCU-ESP32 30-pin form factor, 15 pins per side, CH340G or CP2102 USB-UART bridge, AMS1117 LDO, user LED on GPIO2. Use when working on a 30-pin ESP32 devkit (ESP32-D0WDQ6 / ESP32-D0WD-V3, ESP-WROOM-32 module): project setup, platformio.ini and sdkconfig for ESP-IDF or Arduino, pin mapping and which GPIOs are safe, strapping pins, ADC1 vs ADC2 with Wi-Fi, SPI speed and IO_MUX pins, I2C, deep sleep and RTC wake pins, flashing over the CH340 bridge, BOOT/EN recovery, brownouts, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the 36-pin ESP32-WROOM-32 development board — the original DOIT ESP32 DevKit V1 with 18 pins per side, i.e. the 30-pin layout plus the six in-package flash pins (SD0 SD1 SD2 SD3 CMD CLK = GPIO6-11) broken out at the USB end, CH340G or CP2102 bridge, AMS1117 LDO, user LED on GPIO2, GPIO0 not on the header. Use when working on a 36-pin ESP32 devkit (ESP32-D0WDQ6 / ESP32-D0WD-V3, ESP-WROOM-32 module), or when identifying which ESP32 board size you have: project setup, platformio.ini and sdkconfig for ESP-IDF or Arduino, pin mapping and which GPIOs are safe, the flash-pin trap, strapping pins, ADC1 vs ADC2 with Wi-Fi, SPI speed and IO_MUX pins, deep sleep and RTC wake pins, flashing, BOOT/EN recovery, brownouts, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the 38-pin ESP32-WROOM-32 development board — Espressif ESP32-DevKitC V4, Ai-Thinker NodeMCU-32S, DOIT ESP32 DevKit V1 38-pin and their CH340/CP2102 clones, 19 pins per side, with GPIO0 and the six in-package flash pins (GPIO6-11, labelled D0 D1 D2 D3 CMD CLK or SD0-SD3) broken out. Use when working on a 38-pin ESP32 devkit (ESP32-D0WDQ6 / ESP32-D0WD-V3, ESP-WROOM-32 or ESP32-WROVER module): project setup, platformio.ini and sdkconfig for ESP-IDF or Arduino, pin mapping and which GPIOs are safe, the flash-pin and IO0 traps, WROVER GPIO16/17 PSRAM conflict, strapping pins, ADC1 vs ADC2 with Wi-Fi, SPI speed and IO_MUX pins, deep sleep and RTC wake pins, flashing, BOOT/EN recovery, brownouts, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the ESP32-C3 0.42" OLED board (ESP32-C3FH4, QFN32) — the ABRobot / 01Space "ESP32-C3-0.42LCD" mini board and its clones, sold as "ESP32-C3 SuperMini with OLED" and "ESP32 C3 OLED development board". Covers its 72x40 SSD1306 OLED on I2C, the single I2C bus, blue LED on GPIO8, BOOT button on GPIO9, USB Serial/JTAG console, ADC1, Wi-Fi/BLE, and the ESP-IDF + PlatformIO setup around them. Use when working on this board or a bare ESP32-C3: project setup, platformio.ini and sdkconfig, pin mapping and strapping pins, getting the 0.42-inch display to show something other than snow, U8g2 offsets, adding a second I2C device, flashing over USB-C, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Outbound SDR (Sales Development Representative) operating system that runs the full top-of-funnel motion across HubSpot (CRM, engagement, and source of truth) and Exa (web research + signals). Use this skill WHENEVER the user is doing outbound sales development, building target/prospect lists, defining or refining an ICP, enriching leads, researching accounts or people before outreach, writing cold emails or multi-touch sequences, qualifying or scoring leads, logging activity to CRM, handing meetings off to AEs, or reporting on pipeline. Trigger it even when the user only says things like "find me 50 leads", "research this account", "write a cold email to this person", "score these leads", "log this in HubSpot", or "build a sequence"; these are all SDR tasks this skill governs. Do not wait for the user to say "SDR" or "prospecting" explicitly.

日本語の概要は準備中です。原文の説明を表示しています。

Reconstructs the development cycle from git history, distills sequential/parallel patterns, and produces actionable insights for improving future iterations. Triggers: recall, retrospective, development analysis, what happened, dev cycle analysis.

日本語の概要は準備中です。原文の説明を表示しています。

Computes development quality and velocity metrics from git history and tracks improvement over time. Measures fix ratios, rework hotspots, test coverage, DORA metrics, and code churn.

日本語の概要は準備中です。原文の説明を表示しています。

Implement or change ROS 2 Jazzy packages, nodes, interfaces, launch files and configuration in a colcon workspace. Use for building and validating a development change, including tests that report success without running. For a live QoS, TF, IMU or odometry fault, use ros2-troubleshooting.

日本語の概要は準備中です。原文の説明を表示しています。

Build a velocity-based release roadmap with risk buffers. Use when the user says "release plan", "when will we ship", "plan the next release", "map sprints to milestones", "estimate our release date", "how many sprints until done", or wants to translate a backlog into a delivery timeline - even if they don't say "release planning". Based on "Agile Estimating and Planning" by Mike Cohn (velocity, story points, cone of uncertainty, risk buffers).

日本語の概要は準備中です。原文の説明を表示しています。

Analyzes your recent Claude Code chat history to identify coding patterns, development gaps, and areas for improvement, curates relevant learning resources from HackerNews, and automatically sends a personalized growth report to your Slack DMs.

日本語の概要は準備中です。原文の説明を表示しています。

Run the current session as a senior developer (Opus) leading a configurable junior fleet. Decomposes requests into scoped tasks, dispatches junior-developer subagents in parallel, optionally runs an architect plan-review gate before dispatch, autonomously resolves escalations, optionally dispatches a doc-writer second wave after juniors complete, then integrates and gates with /test + /governance. Use when the user says "/dev-team", "run the dev team", "delegate this to the juniors", "act as the senior dev", or wants a task built by a senior-led fleet.

日本語の概要は準備中です。原文の説明を表示しています。

Diagnoses, remediates, and manages Google Cloud Identity and Access Management (IAM) access issues. Supports two distinct operational modes: (1) Requester Flow for developers encountering access denials (capturing error context, self-service PAM JIT activations, elevated developer self-remediation, or logging structured tickets), and (2) Resolver Flow for privileged administrators (authoritative Policy Troubleshooter analysis, deny policy exemptions, least-privilege role discovery, and PAM/IAM provisioning).

日本語の概要は準備中です。原文の説明を表示しています。

Guides a developer's first steps on Google Cloud, covering account creation, billing setup, project management, and deploying a first resource. Use when a new developer wants to initialize their first Google Cloud project, configure billing, and verify deployment. Don't use for enterprise organization setup (use Google Cloud Setup guided flow for that instead). Don't use for complex multi-project architectures.

日本語の概要は準備中です。原文の説明を表示しています。

Develop AI-powered applications using Genkit in Node.js/TypeScript. Use when the user asks about Genkit, AI agents, flows, or tools in JavaScript/TypeScript, or when encountering Genkit errors, validation issues, type errors, or API problems.

日本語の概要は準備中です。原文の説明を表示しています。

Locates and loads the right Google product skill on demand from a remote catalog index, instead of preloading every skill. Use at the START of any request touching a Google product, API, or developer platform - including Google Cloud (GKE, Cloud Run, IAM, BigQuery, Vertex AI, Spanner), Google Ads, Google Analytics, Google Workspace (Gmail, Drive, Admin SDK), Chrome and Chrome extensions, Android, Firebase, YouTube, Google Maps, Gemini and the Gemini API, Google Play, and Flutter. Consult the index before answering from memory or searching the web. Don't use for non-Google products.

日本語の概要は準備中です。原文の説明を表示しています。

Develop AI-powered applications using Genkit in Go. Use when the user asks to build AI features, agents, flows, or tools in Go using Genkit, or when working with Genkit Go code involving generation, prompts, streaming, tool calling, or model providers.

日本語の概要は準備中です。原文の説明を表示しています。

Develop AI-powered applications using Genkit in Python. Use when the user asks about Genkit, AI agents, flows, or tools in Python, or when encountering Genkit errors, import issues, or API problems.

日本語の概要は準備中です。原文の説明を表示しています。

Provides guidance and instructions on managing remote devices on Developer Device Platform (DDP). Use when reserving remote Android devices, establishing connection tunnels, checking session status, or extending/cancelling leases. Don't use for iOS or local device/hardware inquiries.

日本語の概要は準備中です。原文の説明を表示しています。

Build robust backend systems — APIs (REST, GraphQL, gRPC), authentication (OAuth 2.1, JWT), databases, performance optimization, security (OWASP Top 10), scalability patterns (microservices, caching, sharding), and testing. Use when designing APIs, implementing auth, optimizing queries, handling security vulnerabilities, building microservices, or developing production-ready backend systems.

日本語の概要は準備中です。原文の説明を表示しています。

FE Dev (Frontend Developer) agent. Reads BA + TechLead + PM + BE artifacts and generates frontend source code files and pr-description.md. Part of the Virtual Team Skill pipeline.

日本語の概要は準備中です。原文の説明を表示しています。

BE Dev (Backend Developer) agent. Reads BA + TechLead + PM artifacts and generates backend source code files, .env.example, and pr-description.md. No hardcoded credentials. Part of the Virtual Team Skill pipeline.

日本語の概要は準備中です。原文の説明を表示しています。

Use when designing or reviewing Salesforce sandbox topology, refresh cadence, masking, and environment purpose. Triggers: 'Developer sandbox', 'Developer Pro', 'Partial Copy', 'Full sandbox', 'sandbox refresh', 'data masking', 'test environment', 'Gov Cloud sandbox'. NOT for how many environments a program needs and how they map to branches - use devops/environment-strategy. NOT for re-seeding reference data after a refresh - use data/sandbox-refresh-data-strategies. Also covers: SandboxPostCopy Apex class, SandboxInfo and SandboxProcess Tooling API, SandboxSettings metadata, sandbox topology table, refresh calendar.

日本語の概要は準備中です。原文の説明を表示しています。

RecordType ID differences across orgs: dynamic lookup via Schema.SObjectType methods, DeveloperName for stable refs, hard-coded ID anti-patterns, record-type caching, deployment impact. NOT for deciding whether to use record types at all — use admin/record-types-and-page-layouts. NOT for layout/profile explosion at scale — use admin/record-type-strategy-at-scale. NOT for hard-coded Profile, Queue or User IDs in Apex — use apex/apex-hardcoded-id-elimination.

日本語の概要は準備中です。原文の説明を表示しています。