「writing」の検索結果

Find Earth2Studio models, data sources, and examples for a weather/climate use case. Do NOT use for writing inference code, downloading data, or installation.

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill when the user is tuning a live or captured `doca-flow` pipeline with `doca_flow_tune` — snapshotting pipe / counter / KPI state, picking a tuning axis (rule placement, resource hints / table sizing, HW-offload mode) and a matching measurement (rule-install rate, lookup latency, hardware-counter delta), running offline or online (read-only or state-changing) modes, reading the dumper CSV / analyze JSON / visualize mermaid, or applying a recommendation back into the Flow program. Trigger even when the user does not explicitly mention "doca_flow_tune" — typical implicit phrasings include "Flow rule-install rate is low on BlueField", "table sizing looks wrong for this pipe", "tune visualize step is empty", "before/after counters don't move", or "which doca-flow knob does this recommendation hit". Refuse and route elsewhere for measuring baseline numbers (doca-flow-perf, doca-flow-dpa-perf), writing the doca-flow application, DOCA install, or streaming Flow telemetry — those belong to other skills.

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill when the user runs doca_dpa_hl_tracer to capture/decode DPA-side traces at the programming-events layer (kernel entry/exit, sync points, comm primitive calls, RDMA WR submission, completion drain) — picking TRACE vs CRIT, tuning the JSON config (file-size limits + file_size_limit_policy, thread priorities/cores), decoding against the matching DPA-side ELF, or diagnosing empty/noisy captures. Trigger even when the user does not explicitly mention "DOCA DPA tracer" or "high-level tracer" — typical implicit phrasings include "DPA kernel returns wrong result but host completions look clean", "kernel-entry to first-comm latency is huge", "RDMA WR to drain gap on the DPA", "trace file truncated mid-run", "TRACE doubled my DPA latency", or "tracer wrote a file but parser shows zero events". Refuse and route elsewhere for writing DPA kernels, DPA-Comms/DPA-Verbs programming, raw per-cycle DPA profiling, host-side doca-dpa debugging, or production DPA telemetry — those belong to other skills.

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill when the user is invoking doca_flow_dpa_perf on DPA-capable hardware (ConnectX-7 minimum supported, ConnectX-8 recommended, or BlueField-3) to measure rule update / disable rates on the DPA-offloaded DOCA Flow path — picking the active / passive device split, choosing workload-shape axes (burst, queue, completion threshold, workers, hash pipe algo, PSL tables), or reading Kops/sec iteration stats and the optional self-test. Trigger even when the user does not explicitly mention "doca_flow_dpa_perf" or "DPA Provider" — typical implicit phrasings include "how fast can the DPA program path-selector entries", "baseline rule-update rate on ConnectX-8", "tool reports zero ops on my BlueField", "self-test sentinel never shows on tcpdump", or "is my BlueField-2 DPA-capable". Refuse and route elsewhere for the host / DPU-CPU Flow path (doca-flow-perf), Flow pipeline tuning (doca-flow-tune), writing doca-flow / doca-dpa applications, or DOCA install — those belong to other skills.

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill when the user is doing hands-on DOCA Flow DPA Provider work — exporting a `doca-flow` pipe or external resource (index-selector/memory) into BlueField DPA address space so a DPACC-built kernel can read counters, mutate hash-pipe entries, and update/read memory or index-selector resources inline with Flow. Covers per-port `doca_flow_dpa_ctx`, three queue types (general/resources-write/resources-read), the order-sensitive export handshake (`_export_prepare` → add entries → `_export` → `_get_device_addr`), and DPA-side device API. Trigger even when the user does not say "DOCA Flow DPA Provider" — implicit phrasings include "DPA kernel never sees entries in the exported pipe", "BAD_STATE from `_pipe_export`", "how do I disable a hash entry from a DPA kernel", "DPA memory read returns no value", or "DPA-side post keeps returning AGAIN". Refuse and route elsewhere for `doca-flow` pipe construction, generic host-side DPA (`doca-dpa`), or DPA-side kernel-writing — those belong to other skills.

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill when the user has an existing DPDK application and is adding DOCA capabilities in-place — most commonly DOCA Flow hardware steering — without rewriting the data-plane in DOCA-native form: binding a DPDK port id to a `doca_dev` (`doca_dpdk_port_probe` / `doca_dpdk_port_as_dev`), converting `rte_mbuf` ↔ `doca_buf`, querying `doca_dpdk_cap_is_rep_port_supported`, or debugging `DOCA_ERROR_*` from a bridge call. Trigger even without "DOCA DPDK Bridge": "how do I add DOCA Flow to my DPDK app", "make a DPDK port visible to DOCA", "the bridge loads but every operation returns errors", "pkg-config --exists doca-dpdk-bridge fails", or "DOCA_ERROR_NOT_FOUND on port registration". Route elsewhere for fresh DOCA-native packet I/O (doca-eth), flow-rule programming (doca-flow), DOCA or DPDK install (doca-setup), or RDMA data movement (doca-rdma).

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill when the user is invoking the DOCA PCC Counters tool — the `pcc_counters.sh` bash script under the DOCA tools directory — to arm and read the fixed firmware/hardware PCC (Programmable Congestion Control) diagnostic counters (CNP, RTT, WRED-drop, etc.) on a ConnectX / BlueField device via mst + the mlx5 debugfs `diag_cnt` interface. The script takes two positional args — `set | query` and an mst device path — with no `--help` or subcommands. Trigger even without "pcc_counters.sh" or "PCC counters": "how do I read the CNP / RTT / WRED-drop counters", "PCC counter stuck at zero", "the script says Bad Device", or "is congestion control dropping packets on this port?". Route elsewhere for writing a custom PCC algorithm (doca-pcc), factory firmware PCC config, DOCA install, or fleet-wide CC tuning.

日本語の概要は準備中です。原文の説明を表示しています。

DOCA-shipped Zero-Touch RoCE RTT congestion control (ZTR RTTCC) reference algorithm on a BlueField-3 DPA: deploy, tune and evaluate doca_pcc_dev_ztr_rttcc_algo through the shipped DOCA PCC sample. Trigger on "my RoCE-v2 flows aren't being throttled", "PCC sample isn't dispatching to my algo", "set-params returns fail", "algorithm loaded but counters are flat", "how do I pick the multipath PCC variant", or "do I need a custom CC algorithm on BF3", even without naming ZTR RTTCC. Your own algorithm through the host library belongs to doca-pcc; the doca_spcx_cc command line to doca-spcx-cc. Covers picking a variant (vanilla / PM / RX-rate / multipath / window-probeless) at DPACC build time, tuning host-set parameters, and DOCA_PCC_DEV_STATUS_FAIL from the algorithm. Refuse and route elsewhere for writing a custom PCC algorithm from scratch, read-only PCC counter inspection, or firmware-only pre-Programmable PCC.

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill when the user is writing their first DOCA app or asking a library-agnostic programming question — picking a shipped sample to copy and modify, wiring pkg-config + meson (or FFI from Rust / Go / Python against the public C ABI), walking the Core lifecycle (create → configure → start → connect → use → stop → destroy), or decoding a DOCA_ERROR_*. Trigger on implicit phrasing: "write my first DOCA program", "meson line for doca_rdma_*", "DOCA_ERROR_BAD_STATE on first call", "call DOCA from Rust", "built clean but nothing on the wire". Refuse install / hugepages / pkg-config (doca-setup), docs or version lookup (doca-public-knowledge-map), and library-internal API work (matching library skill).

日本語の概要は準備中です。原文の説明を表示しています。

Use this skill when wiring the DOCA SHA Offload Engine (an OpenSSL ENGINE) into an existing OpenSSL pipeline to offload one-shot SHA-1, SHA-256, or SHA-512 (EVP_Digest) onto DOCA SHA hardware without rewriting against doca-sha. Covers engine load mechanics (`openssl engine dynamic`, `set_pci_addr` ctrl, `-engine_impl`), the SHA-224 negative test that proves offload engaged, the message-size window where offload beats CPU SHA, and engine-vs-library selection. Trigger even when the user does not say "DOCA SHA Offload Engine" or "OpenSSL ENGINE" — typical implicit phrasings: "speed up openssl SHA on BlueField", "offload SHA without code changes", "is openssl using the accelerator or falling back to software", "prove DOCA SHA actually ran", "openssl dgst hashed but I'm not sure it was offloaded". Refuse and route elsewhere for new SHA pipelines (use doca-sha), MD5 / SHA-3 / SHA-224 / HMAC-SHA offload, incremental hashing via chained `EVP_DigestUpdate`, or OpenSSL PROVIDER authoring.

日本語の概要は準備中です。原文の説明を表示しています。

Use when writing or debugging nvMolKit Python code for GPU-accelerated RDKit fingerprints, similarity, conformers, clustering, and molecular searches.

日本語の概要は準備中です。原文の説明を表示しています。

Review planner task packets for readiness without rewriting authoritative task state.

日本語の概要は準備中です。原文の説明を表示しています。

【META SKILL】分析当前剪辑逻辑与风格，总结并生成一个新的可复用 Skill 文件，存入剪辑技能库。Analyze the current editing logic and style, summarize and generate a new reusable Skill file, and store it in the editing skill library.

日本語の概要は準備中です。原文の説明を表示しています。

Golang concurrency design — goroutine lifecycle and leak prevention, channels and `select`, channel ownership and direction, `sync.Mutex`/`RWMutex`/`sync.Map`/`sync.Once`/atomics, `errgroup`, `singleflight`, worker pools, and fan-out/fan-in pipelines. Use when writing or reviewing concurrent Go code, when choosing between channels and mutexes, when protecting a shared map or counter, or when a goroutine has no clear exit. Not for defensive coding unrelated to concurrency such as nil panics, slice aliasing, or numeric overflow (→ See `samber/cc-skills-golang@golang-safety` skill), and not for debugging a specific hung, crashing, or racing program after the fact (→ See `samber/cc-skills-golang@golang-troubleshooting` skill).

日本語の概要は準備中です。原文の説明を表示しています。

Provides gRPC usage guidelines, protobuf organization, and production-ready patterns for Golang microservices. Use when implementing, reviewing, or debugging gRPC servers/clients, writing proto files, setting up interceptors, handling gRPC errors with status codes, configuring TLS/mTLS, testing with bufconn, or working with streaming RPCs.

日本語の概要は準備中です。原文の説明を表示しています。

Comprehensive documentation guide for Golang projects, covering godoc comments, README, CONTRIBUTING, CHANGELOG, Go Playground, Example tests, API docs, and llms.txt. Use when writing or reviewing doc comments, documentation, adding code examples, setting up doc sites, or discussing documentation best practices. Triggers for both libraries and applications/CLIs.

日本語の概要は準備中です。原文の説明を表示しています。

GitHub Actions CI/CD pipeline configuration for Golang projects — workflow files for test, lint, SAST, coverage and vulnerability-scan jobs, Dependabot and Renovate config files, GoReleaser release pipelines, Docker build/push, repository security settings, and AI-driven PR review. Use when setting up or improving Go project CI, writing or fixing `.github/workflows/*.yml`, adding a linter or security scanner as a pipeline job, wiring automated dependency-update bots, or adding quality gates. Covers wiring tools into a pipeline, not the analysis they perform: do NOT use for choosing or interpreting security findings (→ See `samber/cc-skills-golang@golang-security` skill) or for choosing, upgrading, or auditing dependency versions (→ See `samber/cc-skills-golang@golang-dependency-management` skill).

日本語の概要は準備中です。原文の説明を表示しています。

Security best practices and vulnerability prevention for Golang — injection (SQL, command, XSS), cryptography, path traversal, SSRF and HTTP security headers, cookies, secrets management, memory safety, PII in logs, STRIDE/DREAD threat modeling, plus `gosec` SAST, race detection, and fuzz testing. Apply when writing, reviewing, or auditing Go code for security, or when touching crypto, file or network I/O, secrets, user input, or authentication. Not for non-exploitable defensive bugs such as nil panics or slice aliasing (→ See `samber/cc-skills-golang@golang-safety` skill), dependency vulnerability scanning with govulncheck (→ See `samber/cc-skills-golang@golang-dependency-management` skill), or wiring security scanners into CI pipelines (→ See `samber/cc-skills-golang@golang-continuous-integration` skill).

日本語の概要は準備中です。原文の説明を表示しています。

Comprehensive guide for Go database access — parameterized queries, struct scanning, NULLable columns, transactions, isolation levels, SELECT FOR UPDATE, connection pool, batch processing, context propagation, and migration tooling. Use when writing, reviewing, or debugging Golang code that interacts with PostgreSQL, MariaDB, MySQL, or SQLite; for database testing; or for questions about database/sql, sqlx, or pgx. Does NOT generate database schemas or migration SQL.

日本語の概要は準備中です。原文の説明を表示しています。

Comprehensive guide to stretchr/testify for Golang testing. Covers assert, require, mock, and suite packages in depth. Use when writing tests with testify, creating mocks, setting up test suites, or choosing between assert and require. Covers testify assertions, mock expectations, argument matchers, call verification, suite lifecycle, and advanced patterns like Eventually, JSONEq, and custom matchers. Apply when the codebase imports github.com/stretchr/testify.

日本語の概要は準備中です。原文の説明を表示しています。

Golang struct and interface design patterns — composition, embedding, type assertions, type switches, interface segregation, dependency injection via interfaces, struct field tags, and pointer vs value receivers. Use this skill when designing Go types, defining or implementing interfaces, embedding structs or interfaces, writing type assertions or type switches, adding struct field tags for JSON/YAML/DB serialization, or choosing between pointer and value receivers. Also use when the user asks about "accept interfaces, return structs", compile-time interface checks, or composing small interfaces into larger ones.

日本語の概要は準備中です。原文の説明を表示しています。

Production-ready Golang tests — table-driven tests, testify suites and mocks, parallel tests, fuzzing, fixtures, goroutine leak detection with goleak, snapshot testing, code coverage, integration tests, idiomatic test naming. Use when writing or reviewing Go tests, choosing a testing approach, setting up Go test CI, or debugging flaky/slow tests. For testify-specific APIs see `samber/cc-skills-golang@golang-stretchr-testify`; for measurement methodology see `samber/cc-skills-golang@golang-benchmark`.

日本語の概要は準備中です。原文の説明を表示しています。

Implements GraphQL APIs in Golang using gqlgen or graphql-go. Apply when building GraphQL servers, designing schemas, writing resolvers, handling subscriptions, or integrating GraphQL with existing Go HTTP services. Also apply when the codebase imports `github.com/99designs/gqlgen` or `github.com/graph-gophers/graphql-go`.

日本語の概要は準備中です。原文の説明を表示しています。

Golang benchmarking, profiling, and performance measurement. Use when writing, running, or comparing Go benchmarks, profiling hot paths with pprof, interpreting CPU/memory/trace profiles, analyzing results with benchstat, setting up CI benchmark regression detection, or investigating production performance with Prometheus runtime metrics. Also use when the developer needs deep analysis on a specific performance indicator - this skill provides the measurement methodology, while `samber/cc-skills-golang@golang-performance` provides the optimization patterns.

日本語の概要は準備中です。原文の説明を表示しています。