「race」の検索結果

Normalizes ChIP-seq data using exogenous spike-in (ChIP-Rx with Drosophila chromatin per Orlando 2014 / Egan 2016; E. coli carryover for CUT&RUN/CUT&Tag). Distinguishes RRPM from Rx-Input scaling, integrates with DiffBind / DESeq2 / edgeR / csaw via sizeFactors and DiffBind library-size vectors, and applies the Patel et al 2024 *Nat Biotechnol* review's failure-mode framework to validate that normalization is correctly applied at the read level (not peak counts). Use when global signal shifts are expected (HDACi, BETi, EZH2i, dosage, target knockdown), when ChIPseqSpikeInFree detects post-hoc shifts, or when validating internal-control regions before publication.

日本語の概要は準備中です。原文の説明を表示しています。

Validates docked / generated protein-ligand poses using PoseBusters physical-validity tests, strain energy quantification, geometric checks (planarity, vdW overlap, bond/angle distortion), and pose-energy reasonableness. Filters AI-docking outputs (DiffDock, EquiBind, NeuralPLexer) where ~50% of poses fail physical-validity tests. Use when QC-ing docking results, comparing classical vs ML docking outputs, or filtering pose lists before SAR analysis.

日本語の概要は準備中です。原文の説明を表示しています。

Designs PROTACs, molecular glues, and bivalent degraders with explicit handling of E3 ligase choice (VHL, CRBN, IAP, MDM2, KEAP1), linker design (length, composition, rigidity), ternary complex prediction (PRosettaC, DeepTernary, AlphaFold3 with constraints), cooperativity (alpha), DC50 / Dmax characterization, hook effect, and prediction-experiment reconciliation. Use when designing targeted protein degraders, planning linker SAR, predicting ternary complex stability, or building generative degrader workflows.

日本語の概要は準備中です。原文の説明を表示しています。

Analyzes CUT&RUN (Skene Henikoff 2017) and CUT&Tag (Kaya-Okur 2019) chromatin profiling data. Handles SEACR vs MACS2 peak calling (with the btaf375 2025 benchmark guidance), pA-MNase vs pA-Tn5 vs pAG-Tn5 chimera differences, E. coli spike-in carryover normalization, IgG-only control logic (no input), characteristic fragment-size signatures (25-75 bp for CUT&Tag), and lower depth requirements (5M reads typical vs 25M for ChIP). Use when calling peaks from CUT&RUN/CUT&Tag, scaling by E. coli spike-in carryover, choosing SEACR norm mode, or comparing CUT&RUN/Tag results to traditional ChIP.

日本語の概要は準備中です。原文の説明を表示しています。

Implements missing-data sensitivity analyses for confirmatory clinical trials including MMRM under MAR (with Kenward-Roger correction), reference-based multiple imputation (J2R, CR, CIR, LMCF per Carpenter-Roger 2013), Permutt delta-adjustment / tipping-point analysis, pattern-mixture identifying restrictions (CCMV, NCMV, ACMV), and the Cro vs Bartlett variance debate. Use when handling missing primary or secondary endpoint data in regulatory submissions following NRC 2010 and ICH E9(R1).

日本語の概要は準備中です。原文の説明を表示しています。

Runs cis-pQTL Mendelian randomization for drug-target validation using UKB-PPP (Olink), deCODE (SomaScan), Fenland, INTERVAL, ARIC, and FinnGen-PPP proteomes plus colocalization triangulation, phenome-wide on-target adverse-effect scans, cross-platform Olink/SomaScan replication, and PAV (protein-altering variant) sensitivity. Use when nominating or de-risking a drug target from plasma-proteome GWAS, mimicking pharmacological inhibition via cis-pQTL instruments, separating shared-causal from LD-confounded signal under the Schmidt 2020 cis-MR framework, screening on-target adverse phenotypes pheWAS-style, or producing publication-grade STROBE-MR plus PP.H4 evidence for a target gene.

日本語の概要は準備中です。原文の説明を表示しています。

Calls ChIP-seq peaks with MACS3, MACS2, HOMER, or SPP across narrow (TF) and broad (histone) modes. Handles input control matching, fragment-size modeling vs --nomodel, effective genome size, ENCODE-style IDR vs naive overlap, hyper-ChIPable artifacts, and aligner-specific shifts. Use when calling peaks from ChIP-seq alignments, choosing between narrow vs broad mode for a histone mark, deciding model vs nomodel for low-depth data, applying ENCODE pseudoreplicate IDR, or reconciling MACS vs HOMER vs SPP results.

日本語の概要は準備中です。原文の説明を表示しています。

Mark and remove PCR/optical duplicates using samtools fixmate and markdup. Use when preparing alignments for variant calling or when duplicate reads would bias analysis.

日本語の概要は準備中です。原文の説明を表示しています。

Detects differential alternative splicing between conditions using rMATS-turbo (binomial LRT on junction counts), leafcutter (Dirichlet-multinomial GLM on intron clusters), MAJIQ V3 deltapsi/HET (Bayesian posterior on LSVs), SUPPA2 (empirical-null on TPM-derived PSI), or Shiba (junction-imbalance-corrected, 2025 SOTA at low coverage). Reports FDR-corrected significance and delta PSI effect sizes. Tools differ in statistical model, annotation dependence, calibration regime, and replicate-count requirements. Use when comparing splicing patterns between treatment groups, tissues, or disease states.

日本語の概要は準備中です。原文の説明を表示しています。

Generate alignment statistics using samtools flagstat, stats, depth, coverage, and mosdepth. Use when assessing alignment quality, calculating coverage, or generating QC reports.

日本語の概要は準備中です。原文の説明を表示しています。

Infer cis-regulatory connections (peak-to-peak co-accessibility) from scATAC-seq using Cicero, ArchR getCoAccessibility, or SCENIC+. Use when linking enhancer accessibility to promoter accessibility, identifying enhancer-gene pairs from chromatin alone (without paired RNA), running gene-regulatory inference combining ATAC + RNA, or comparing predicted regulatory contacts against Hi-C/Micro-C ground truth.

日本語の概要は準備中です。原文の説明を表示しています。

Validate alignment quality with insert size distribution, proper pairing rates, GC bias, strand balance, and other post-alignment metrics. Use when verifying alignment data quality before variant calling or quantification.

日本語の概要は準備中です。原文の説明を表示しています。

Quantifies alternative splicing as PSI (percent spliced in) from RNA-seq using rMATS-turbo (BAM-based event), SUPPA2 (TPM-based event), MAJIQ V3 (LSV-based Bayesian), leafcutter (annotation-free intron clusters), VAST-TOOLS (cross-species with microexon support), Shiba (junction-imbalance-corrected, 2025 SOTA at low coverage), or IRFinder-S (intron retention coverage-aware). Distinguishes the five canonical event classes (SE, A5SS, A3SS, MXE, RI), special classes (microexons, exitrons, AFE/ALE), intron retention subtypes (canonical RI vs detained introns), and applies effective-length normalization. Use when measuring splice-site usage or isoform inclusion ratios from short-read RNA-seq.

日本語の概要は準備中です。原文の説明を表示しています。

Detect transcription factor binding footprints in ATAC-seq using TOBIAS, HINT-ATAC, Wellington, or scprinter. Use when identifying bound TF sites within accessible regions, correcting Tn5 insertion bias before footprinting, choosing between cleavage-based and aggregate-based footprinters, or comparing differential TF activity between conditions.

日本語の概要は準備中です。原文の説明を表示しています。

Audit required bioinformatics command-line tools against Lmod or Environment Modules on Linux HPC clusters, resolve executable and version requirements, and reproducibly deploy missing software through a site-approved EasyBuild, Spack, Bioconda/micromamba, Apptainer, binary, or source-build workflow. Use when Codex must inspect module availability, diagnose a missing or wrong-version bioinformatics tool, install scientific software on Slurm/PBS clusters, publish or validate modulefiles, or produce an auditable and rollback-ready cluster software deployment.

日本語の概要は準備中です。原文の説明を表示しています。

ATAC-seq library quality control -- TSS enrichment, FRiP, fragment-size periodicity, library complexity (NRF/PBC1/PBC2), mitochondrial fraction, and ENCODE 4 thresholds. Use when assessing whether an ATAC-seq library passes ENCODE acceptance criteria, diagnosing transposition artefacts, comparing Omni-ATAC vs standard prep quality, or selecting which replicates to drop before peak calling.

日本語の概要は準備中です。原文の説明を表示しています。

WheatOmics 平台（wheatomics.sdau.edu.cn）数据查询技能。当用户需要查询小麦/麦族基因信息、表达谱、共表达、蛋白互作、同源与共线性、序列获取、BLAST、GO/KEGG 富集、变异数据、文献检索或引物设计时使用。

日本語の概要は準備中です。原文の説明を表示しています。

NCPGR高性能计算集群LSF作业调度系统使用指南。用于提交、管理和监控LSF批处理作业，包括串行作业、多线程作业、MPI并行作业、GPU作业、数组作业等。当用户需要编写LSF作业脚本、提交计算任务、查询作业状态、调整作业参数或排查作业问题时使用此skill。

日本語の概要は準備中です。原文の説明を表示しています。

LSF 作业内存不足时的调整技能。当作业因内存不够被挂起(SSUSP)或终止(EXIT/MEMLIMIT)时，通过调整 bsub -n 的节点（核数/slot）数量来扩大可用内存——可用运行内存 ≈ 5GB × 申请节点数。当用户说内存不足、作业被杀、OOM、需要更大内存，或排查 EXIT/SSUSP 作业时，配合 lsf-ncpgr skill 一起使用。

日本語の概要は準備中です。原文の説明を表示しています。

Generate pileup data for variant calling using samtools mpileup and pysam. Use when preparing data for variant calling, analyzing per-position read data, or calculating allele frequencies.

日本語の概要は準備中です。原文の説明を表示しています。

Analyzes differential transcript usage (DTU) and isoform switches with functional consequence prediction (NMD via 50nt rule, ORF disruption, protein domain loss/gain, signal peptide changes, IDR alterations, coding-potential shifts). Tools include IsoformSwitchAnalyzeR v2 (auto-selects satuRn for >5 reps else DEXSeq), the manual DRIMSeq -> DEXSeq/satuRn -> stageR DTU pipeline, and fishpond/swish for inferential-uncertainty-aware DTE. Distinguishes DTU from DGE and DTE; integrates external annotators (CPC2, Pfam, SignalP, IUPred2A or DeepTMHMM). Use when investigating how splicing differences alter protein function or trigger NMD-mediated degradation.

日本語の概要は準備中です。原文の説明を表示しています。

Analyzes alternative splicing from PacBio Iso-Seq (HiFi, Kinnex/MAS-Iso-seq) and Oxford Nanopore (direct cDNA, direct RNA, R10.4.1+) long-read RNA-seq with full-isoform resolution. Tools include FLAIR (correct/collapse/quantify/diffSplice for PacBio + ONT), IsoQuant (de-novo or annotation-guided isoform discovery 2024 SOTA), Bambu (annotation-aware Bayesian discovery + quantification with Novel Discovery Rate), SQANTI3/SQANTI-LR (isoform classification: FSM/ISM/NIC/NNC + artifact flags), rMATS-long (event calling on long-read isoforms), and minimap2 (-ax splice:hq for HiFi; -ax splice -k14 for ONT cDNA; add -uf only for direct RNA or stranded cDNA preps). Solves microexon detection, recursive splicing, complex multi-exon isoforms, and DTU without transcript-quantification uncertainty. Use when short-read AS limitations (anchor length, complex isoforms, microexons, recursive splicing, transcript ambiguity) demand full-isoform resolution.

日本語の概要は準備中です。原文の説明を表示しています。

Use when users need bioinformatics analysis on the NCPGR cluster, especially when converting analysis requests into local software choices, resource plans, and LSF job scripts.

日本語の概要は準備中です。原文の説明を表示しています。

Generate consensus sequences and manage reference files using samtools. Use when creating consensus from alignments, indexing references, or creating sequence dictionaries.

日本語の概要は準備中です。原文の説明を表示しています。