「appi」の検索結果

Firmware development for the Waveshare ESP32-C6-Touch-LCD-1.47 board (ESP32-C6FH8, QFN32, 8 MB flash, SKU 31203 / 31201-M) — its 1.47" 172x320 JD9853 IPS panel, AXS5106L capacitive touch controller on I2C 0x63, QMI8658A IMU on I2C 0x6B, microSD/TF slot on the shared SPI2 bus, ETA6098 battery charger with VBAT sensing, USB-Serial-JTAG console, Wi-Fi 6/BLE/802.15.4 radio, and the ESP-IDF + PlatformIO setup around them. Use when working on this board: project setup, platformio.ini and sdkconfig, pin mapping and strapping pins, JD9853 bring-up, touch coordinates and calibration, LVGL memory budgeting, backlight PWM, TF card on the shared bus, battery voltage, flashing over Type-C, or debugging why something on the board does not work. This is NOT the non-touch ESP32-C6-LCD-1.47 (ST7789, 4 MB) — the two share a name and almost no pins.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the Waveshare ESP32-C6-LCD-1.47 board (ESP32-C6FH4, QFN32) — its 1.47" 172x320 ST7789 LCD, WS2812 RGB LED, microSD/TF slot, USB-Serial-JTAG console, Wi-Fi 6/BLE/802.15.4 radio, and the ESP-IDF + PlatformIO setup around them. Use when working on this board or the ESP32-C6-LCD-1.47-M variant (SKU 28563 / 30381, WS-28563): project setup, platformio.ini and sdkconfig, pin mapping and strapping pins, LCD or SD bring-up on the shared SPI bus, backlight brightness, display frame rate, flashing over Type-C, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the 30-pin ESP32-WROOM-32 development board — the DOIT ESP32 DevKit V1 / ESP32 CH340 Type-C / NodeMCU-ESP32 30-pin form factor, 15 pins per side, CH340G or CP2102 USB-UART bridge, AMS1117 LDO, user LED on GPIO2. Use when working on a 30-pin ESP32 devkit (ESP32-D0WDQ6 / ESP32-D0WD-V3, ESP-WROOM-32 module): project setup, platformio.ini and sdkconfig for ESP-IDF or Arduino, pin mapping and which GPIOs are safe, strapping pins, ADC1 vs ADC2 with Wi-Fi, SPI speed and IO_MUX pins, I2C, deep sleep and RTC wake pins, flashing over the CH340 bridge, BOOT/EN recovery, brownouts, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the 36-pin ESP32-WROOM-32 development board — the original DOIT ESP32 DevKit V1 with 18 pins per side, i.e. the 30-pin layout plus the six in-package flash pins (SD0 SD1 SD2 SD3 CMD CLK = GPIO6-11) broken out at the USB end, CH340G or CP2102 bridge, AMS1117 LDO, user LED on GPIO2, GPIO0 not on the header. Use when working on a 36-pin ESP32 devkit (ESP32-D0WDQ6 / ESP32-D0WD-V3, ESP-WROOM-32 module), or when identifying which ESP32 board size you have: project setup, platformio.ini and sdkconfig for ESP-IDF or Arduino, pin mapping and which GPIOs are safe, the flash-pin trap, strapping pins, ADC1 vs ADC2 with Wi-Fi, SPI speed and IO_MUX pins, deep sleep and RTC wake pins, flashing, BOOT/EN recovery, brownouts, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Test-to-requirement coverage mapping. Reads plan acceptance criteria and test files, produces a coverage gap report showing which requirements have no tests. Use during Phase 2 (Test) or Phase 4 (Review) to verify test completeness. Named after the Nyquist sampling theorem — sufficient test coverage prevents aliased (missed) requirements. NOT for running tests (see mk:testing); NOT for structural code review (see mk:review).

日本語の概要は準備中です。原文の説明を表示しています。

Process, analyze, and visualize geospatial data at scale. Handles drone imagery, GPS tracks, GeoJSON optimization, coordinate transformations, and tile generation. Use for mapping apps, drone data processing, location-based services. Activate on "geospatial", "GIS", "PostGIS", "GeoJSON", "map tiles", "coordinate systems". NOT for simple address validation, basic distance calculations, or static map embeds.

日本語の概要は準備中です。原文の説明を表示しています。

Collage as a web design aesthetic — overlapping elements, mixed media, cut-out shapes, scrapbook layouts, and editorial magazine spreads adapted for the web. CSS techniques for layered compositions using z-index stacking, clip-path, mix-blend-mode, parallax layering, and grid-breaking layouts. Activate on 'collage web', 'editorial layout', 'magazine layout', 'overlapping elements', 'scrapbook', 'cut-out aesthetic', 'mixed media web', 'layered composition', 'grid-breaking', 'editorial web design', 'fashion website layout', 'David Carson'. NOT for photo collage/gallery grids (use collage-layout-expert), maximalist density (use maximalist-web-design), neobrutalism (use neobrutalist-web-designer).

日本語の概要は準備中です。原文の説明を表示しています。

Maps between gene identifier systems (Ensembl, Entrez, HGNC symbol, UniProt, RefSeq, MANE) using AnnotationDbi, biomaRt, mygene, pyensembl, and Ensembl REST. Encodes Ensembl version stripping with GENCODE _PAR_Y preservation, the Ziemann 2016 Excel autocorrect debacle and Bruford 2020 HGNC renames (SEPT*->SEPTIN*, MARCH*->MARCHF*, MARC*->MTARC*, DEC1->DELEC1), OCT4/POU5F1 alias resolution, biomaRt archive endpoints for release pinning, the `filters` (plural) gotcha, MANE Select for clinical reporting, cross-species orthology via Ensembl Compara / OMA / OrthoDB, and tx2gene construction for tximport. Use when converting gene IDs across systems, handling renamed symbols, building tx2gene, pinning to a specific Ensembl release for reproducibility, or mapping cross-species orthologs.

日本語の概要は準備中です。原文の説明を表示しています。

Reconstruct ancestral states at internal phylogenetic nodes for sequences (PAML codeml, IQ-TREE --ancestral, GRASP, FastML), discrete traits (corHMM hidden-rate Markov, ape::ace, phytools::make.simmap stochastic mapping, BayesTraits), and continuous traits (phytools::fastAnc, geiger Brownian/OU, RPANDA). Use when designing constructs for ancestral protein resurrection, tracing trait evolution along a tree, performing stochastic character mapping, testing models of trait evolution (BM vs OU vs EB), inferring ancestral genome content via Dollo or DTL reconciliation, or quantifying ancestral-state uncertainty for downstream comparative analyses.

日本語の概要は準備中です。原文の説明を表示しています。

Resolves GWAS associations to candidate causal variants and credible sets via SuSiE, susie_rss, FINEMAP, CAVIAR, DAP-G, PAINTOR, PolyFun, SuSiEx, MultiSuSiE, and FOCUS. Use when narrowing a GWAS lead SNP to a 95 percent credible set, choosing between in-sample and reference LD, calibrating non-sparse loci with SuSiE-inf or FINEMAP-inf, integrating functional priors via PolyFun, fine-mapping across ancestries with SuSiEx, diagnosing LD mismatch via estimate_s_rss and kriging_rss, handling HLA or long-range LD, or feeding credible sets into coloc.susie for colocalization.

日本語の概要は準備中です。原文の説明を表示しています。

Detects allele-specific transcription factor or histone modification binding from heterozygous-variant ChIP-seq using WASP (reference-bias filter; mandatory upstream), RASQUAL (joint QTL + bias-corrected testing), BaalChIP (Bayesian beta-binomial with copy-number-aware overdispersion), and AlleleSeq (personalized diploid genome). Handles imprinted-locus awareness, X-inactivation artifacts, cancer copy-number imbalance, and integration with downstream caQTL / bQTL mapping. Use when identifying variants with allelic effects on TF binding, fine-mapping causal regulatory variants, validating deep-learning variant predictions, or characterizing cis-acting regulatory effects.

日本語の概要は準備中です。原文の説明を表示しています。

Performs gene-level association from GWAS summary statistics via genetically predicted tissue expression using FUSION, PrediXcan, S-PrediXcan, S-MultiXcan, UTMOST, MOSTWAS, kTWAS, EpiXcan, TIGAR-V2, and probabilistic fine-mapping with FOCUS and MA-FOCUS. Use when running TWAS from GWAS sumstats, prioritising candidate causal genes from a GWAS lead locus, picking single-tissue vs cross-tissue models, identifying LD-induced TWAS false positives, choosing ancestry-matched prediction weights, fine-mapping co-regulated TWAS hits, or triangulating TWAS with cis-eQTL Mendelian randomization and colocalization to nominate a causal gene.

日本語の概要は準備中です。原文の説明を表示しています。

Detect allele-specific chromatin accessibility from ATAC-seq using WASP, GATK ASEReadCounter, or RASQUAL. Use when mapping cis-regulatory genetic variants from heterozygous SNPs, separating cis from trans regulation, building chromatin QTL (caQTL) maps, validating GWAS variant function with allelic imbalance, or detecting reference allele mapping bias before downstream analysis.

日本語の概要は準備中です。原文の説明を表示しています。

Guides AI agents through Senzing entity resolution workflows using the Senzing MCP server. Covers data mapping to Senzing format, SDK code generation (Python, Java, C#, Rust, TypeScript/Node.js), documentation search, error troubleshooting, sample data access, reporting and visualization, SDK setup guides, and V3-to-V4 migration. Use when working with entity resolution, record matching, record linkage, deduplication, Senzing SDK integration, data mapping for Senzing ingestion, or troubleshooting Senzing error codes. Also use when the user mentions matching records across data sources, finding duplicate entities, identity resolution, master data management, or needs to resolve who is who across datasets.

日本語の概要は準備中です。原文の説明を表示しています。

Expert-level complex analysis knowledge. Use when working with complex functions, holomorphic functions, Cauchy's theorem, contour integration, Laurent series, residues, conformal mappings, or analytic continuation. Also use when the user mentions 'holomorphic', 'analytic', 'Cauchy theorem', 'residue', 'contour integral', 'Laurent series', 'conformal map', 'Riemann mapping', 'Mobius transformation', 'harmonic function', 'entire function', or 'meromorphic'.

日本語の概要は準備中です。原文の説明を表示しています。

SOP for the automated refinement loop (/refine) workflow. Trigger when: - Exhaustively auditing and optimizing pre-existing codebase artifacts. - Applying iterative contraction mapping to reduce code entropy. - Prompt contains: /refine, refinement loop, contraction mapping, fixed-point sweep.

日本語の概要は準備中です。原文の説明を表示しています。

Map advanced persistent threat (APT) group tactics, techniques, and procedures (TTPs) to the MITRE ATT&CK framework using the ATT&CK Navigator and attackcti Python library. The analyst queries STIX/TAXII data for group-technique associations, generates Navigator layer files for visualization, and compares defensive coverage against adversary profiles. Activates for requests involving APT TTP mapping, ATT&CK Navigator layers, threat actor profiling, or MITRE technique coverage analysis.

日本語の概要は準備中です。原文の説明を表示しています。

Analyzes intrusion activity against the Lockheed Martin Cyber Kill Chain framework to identify which phases an adversary has completed, where defenses succeeded or failed, and what controls would have interrupted the attack at earlier phases. Use when conducting post-incident analysis, building prevention-focused security controls, or mapping detection gaps to kill chain phases. Activates for requests involving kill chain analysis, intrusion kill chain, attack phase mapping, or Lockheed Martin kill chain framework.

日本語の概要は準備中です。原文の説明を表示しています。

新しいプロジェクトまたは既存リポジトリに Claude 用の kickoff 文脈を導入するスキル。 テンプレートとリポジトリ証跡、ユーザー入力をもとに `CLAUDE.md`、`docs/PROJECT_BRIEF.md`、 `docs/SKILL_ROUTING.md`、`docs/QUALITY_GATES.md`、`docs/TEST_STRATEGY.md`、 `docs/DECISION_LOG.md`、`docs/HIDDEN_CONTRACT_REGISTER.md`、 `docs/CROSS_MODULE_CONSISTENCY_MATRIX.md`、`.claude/rules/*`、 `.claude/commands/project-kickoff.md` を必要に応じて作成・更新する。 Use when starting a new project, retrofitting AI project context into an existing repository, bootstrapping Claude memory, or standardizing kickoff documents, rules, and slash-command scaffolding. Distinct from project-manager / project-plan-creator (which plan work), and from completion-quality-gate-designer / hidden-contract-investigator / safe-by-default-architect / cross-module-consistency-auditor / production-parity-test-designer (which deeply refine individual artifacts after bootstrap).

再発しやすい危険な実装パターンを、安全側に倒れる標準パターン・禁止事項・共通層・静的ルール候補へ 変換するスキル。ORM強制、deny-by-default認可、サービス経由I/O、永続化確認後の成功表示などを設計する。 レビューで危険コードを見つけるのではなく、危険コードを書きにくくする設計標準を作ることが目的。 Use when turning repeated defect patterns into safe architectural defaults, forbidden-to-safe mapping tables, common layer designs, and enforceable static analysis rules.

Interactively build a Narrative identity graph workflow from one or more first-party datasets and (optionally) third-party data sources. Confirms each input dataset is mapped to the Rosetta Stone graph edge attribute (mapping it via /generate-rosetta-stone-mappings if not), then composes and submits a workflow that unions every edge source and labels connected components. Use when: "build an identity graph", "generate an identity graph", "create an identity graph", "stitch these datasets into a graph", "make a graph workflow", "label connected components on these datasets", "I want a person graph / household graph / device graph". (narrative-identity)

日本語の概要は準備中です。原文の説明を表示しています。

METAINFORMANT rules for directory src/metainformant/gwas/finemapping. Use when editing, adding tests, or reviewing code under this path. Read the linked AGENTS.md first; use uv only, write outputs to output/, real implementations.

日本語の概要は準備中です。原文の説明を表示しています。

Maps every proposed P&ID object from an accepted enrichment draft to the generic family, catalogue class and required attributes the project's intelligent P&ID authoring tool would need, as a readiness table with UNKNOWN wherever the project catalogue extract is not provided, plus connectivity readiness per line and a numbered list of import blockers. Mapping only: it never writes to the tool, never produces an import file and never claims a class exists in the catalogue. Use when the user asks to "build the readiness map", "show how far the draft is from a sandbox import", "list what would block the import", "map the objects to the tool catalogue" or "check attribute readiness against the catalogue extract" after gate G3. Do not use for validating the discipline sections or assembling the review package, use validation-and-review-package instead. Drafts for human review; never approves, authorises or signs off.

日本語の概要は準備中です。原文の説明を表示しています。

Generates production-grade Appium mobile automation scripts for Android and iOS in Java, Python, or JavaScript. Supports real device and emulator testing locally and on TestMu AI cloud with 100+ real

日本語の概要は準備中です。原文の説明を表示しています。