「arduino」の検索結果

Discover, configure, and connect to Arduino boards from MATLAB using the Arduino Support Package. Use this skill when the user wants to set up an Arduino board, connect to Arduino hardware, find connected boards, scan serial ports, configure Arduino libraries, or any task that requires an Arduino connection as a prerequisite (e.g., blink LED, read sensor, read digital pin, read analog pin, write pin, plot sensor data, scan I2C, use ultrasonic sensor, control servo, read temperature, read voltage, data logging from hardware). Triggers on: arduino, board setup, COM port, serial port, hardware connection, Arduino Nano, Arduino Uno, Arduino Mega, Arduino Micro, Grove, sensor setup, I2C scan, ultrasonic, servo, readDigitalPin, writeDigitalPin, readVoltage, writePWMVoltage, temperature sensor, air pressure, pin read, pin write, analog input.

日本語の概要は準備中です。原文の説明を表示しています。

Use when the user wants to use Arduino sensors or peripherals from MATLAB that are not directly supported by the MATLAB Support Package for Arduino Hardware. Triggers on requests to create, wrap, or expose a custom Arduino library to MATLAB. Also triggers on indirect questions like "How do I read humidity in MATLAB?" or "How do I display text on an LCD from MATLAB?" where the answer requires a custom Arduino add-on library. Covers: custom addon creation, third-party Arduino library integration, LibraryBase class, C++ header files, DependentLibraries, arduinoioaddons namespace, I2C/SPI/GPIO peripheral wrappers.

日本語の概要は準備中です。原文の説明を表示しています。

Design and implement Arduino integration with Azure IoT Hub and IoT Edge, including secure provisioning, resilient telemetry, command handling, and production guardrails.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the Beetle — the CJMCU / DFRobot "Mini Arduino Leonardo" USB board (ATmega32U4 @ 16 MHz, 5 V, 21×28 mm, castellated pads) — its native USB (CDC serial + HID keyboard/mouse/joystick), Caterina bootloader and 1200 bps touch upload, ten exposed I/O pads, four PWM pins across Timer0/Timer1, five ADC channels, I2C on D2/D3, SPI on the back-side ICSP pads, 28 KB usable flash and 2.5 KB SRAM, and the PlatformIO + Arduino AVR core (`board = leonardo`) setup around them. Use when working on this board or any ATmega32U4 Leonardo/Micro/Pro-Micro-class clone: project setup, platformio.ini, why the board shows up as two different serial ports, uploads that fail or hang, recovering a bricked or HID-spamming board by shorting the ICSP reset pads, pin mapping and which pads are missing, PWM/timer conflicts, Servo and tone, USB HID keyboard projects, the SRAM budget, powering from the + pad, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the Arduino Nano (A000005, ATmega328P @ 16 MHz, 5 V) — its 30 KB usable flash, 2 KB SRAM, 1 KB EEPROM, 8-channel 10-bit ADC, six 8-bit PWM pins across three timers, UART shared with the USB-serial chip, I2C on A4/A5, SPI on D10–D13, sleep modes, and the Arduino AVR core + PlatformIO setup around them. Use when working on this board or any ATmega328P Nano clone (FTDI or CH340 USB): project setup, platformio.ini, old-vs-new bootloader uploads, pin mapping, A6/A7 restrictions, timer/Servo/tone conflicts, the 2 KB SRAM budget, analog references, powering from VIN, ICSP recovery, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Expert en DIY et making (3D printing, Arduino, woodworking, electronics, repair)

日本語の概要は準備中です。原文の説明を表示しています。

Mentor for embedded and IoT hardware projects. Helps select MCUs, dev boards, and toolchains, decides where sensor readings end up (phone, PC, dashboard, or alert), and gives time/cost estimates and a phased build plan from breadboard MVP to production PCB. Use when the user mentions embedded, IoT, microcontroller, ESP32, STM32, Arduino, Raspberry Pi Pico, firmware, PCB, KiCad, EasyEDA, PlatformIO, MQTT, Home Assistant, ESPHome, Grafana, an IoT dashboard, seeing sensor data on a phone, or asks for hardware tool recommendations, project planning, or cost/time estimates for an electronics project.

日本語の概要は準備中です。原文の説明を表示しています。

ESPHome device configuration, firmware, and IoT product development. Covers ESP32, ESP32-S3, ESP32-C3, ESP32-C6, ESP32-H2, ESP32-P4, ESP8266, RP2040, RP2350, nRF52, LibreTiny, Shelly, Sonoff, Tuya, BLE proxy, Matter firmware, Thread, Zigbee, GPIO, sensor YAML, LVGL displays, LED strips, voice assistant hardware, device flashing, Arduino conversion, alarm_control_panel, lock, valve, media_player, microphone, speaker, audio DAC, event entities, datetime entities, Z-Wave proxy, MIPI DSI displays, and DLMS smart meters. Also covers designing new ESPHome-based products: hardware selection, component sourcing, PCB design (KiCad), enclosures, 3D printing, CE/FCC certification, BOM optimization, and manufacturing from prototype to production scale.

日本語の概要は準備中です。原文の説明を表示しています。

CLI-first serial port debugging and macro automation with serial-mcp-server for Codex and Claude Code. Use when working with UART or USB-serial devices, listing serial ports, probing STM32/Arduino/ESP32 boards, writing or reading serial data, running JSON serial macros, controlling RTS/DTR, or using serial-mcp-server through MCP tools.

日本語の概要は準備中です。原文の説明を表示しています。

Embedded firmware development for microcontrollers including memory-mapped I/O, GPIO, interrupts, timers, UART/SPI/I2C serial protocols, PWM generation, ADC sampling, interrupt-driven versus polled architectures, RTOS fundamentals, and the bring-up sequence from power-on reset through first printf. Covers AVR/Arduino, ARM Cortex-M, and ESP32 patterns. Use when writing, porting, debugging, or reviewing firmware that directly manipulates hardware peripherals.

日本語の概要は準備中です。原文の説明を表示しています。

Embedded/IoT Engineer — Arduino/ESP32/Raspberry Pi, sensor integration, MQTT/BLE/LoRa, firmware development, battery optimization

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the 36-pin ESP32-WROOM-32 development board — the original DOIT ESP32 DevKit V1 with 18 pins per side, i.e. the 30-pin layout plus the six in-package flash pins (SD0 SD1 SD2 SD3 CMD CLK = GPIO6-11) broken out at the USB end, CH340G or CP2102 bridge, AMS1117 LDO, user LED on GPIO2, GPIO0 not on the header. Use when working on a 36-pin ESP32 devkit (ESP32-D0WDQ6 / ESP32-D0WD-V3, ESP-WROOM-32 module), or when identifying which ESP32 board size you have: project setup, platformio.ini and sdkconfig for ESP-IDF or Arduino, pin mapping and which GPIOs are safe, the flash-pin trap, strapping pins, ADC1 vs ADC2 with Wi-Fi, SPI speed and IO_MUX pins, deep sleep and RTC wake pins, flashing, BOOT/EN recovery, brownouts, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the 30-pin ESP32-WROOM-32 development board — the DOIT ESP32 DevKit V1 / ESP32 CH340 Type-C / NodeMCU-ESP32 30-pin form factor, 15 pins per side, CH340G or CP2102 USB-UART bridge, AMS1117 LDO, user LED on GPIO2. Use when working on a 30-pin ESP32 devkit (ESP32-D0WDQ6 / ESP32-D0WD-V3, ESP-WROOM-32 module): project setup, platformio.ini and sdkconfig for ESP-IDF or Arduino, pin mapping and which GPIOs are safe, strapping pins, ADC1 vs ADC2 with Wi-Fi, SPI speed and IO_MUX pins, I2C, deep sleep and RTC wake pins, flashing over the CH340 bridge, BOOT/EN recovery, brownouts, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the LGT8F328P-LQFP32 MiniEVB — the Nano-style 30-pin "purple nano" board whose silkscreen reads LGTBF32BP (also sold as BTE21-15A, WAVGAT, LGT8F328P Nano V3.0), built on the Logic Green / Prodesign LGT8F328P, an AVR-instruction-compatible LGT8XM part with a 32 MHz internal RC and no crystal, a 12-bit ADC, an 8-bit DAC on D4, four timers, 80 mA drive pins, SWD instead of ICSP, and EEPROM emulated in program flash. Use when working on this board, any LGT8F328P/LGT8F328D/LGT8FX8P board, or a sketch being ported from an Arduino Nano or ATmega328P: PlatformIO setup with the lgt8fx core, platformio.ini, f_cpu/f_osc/clock_source and why timings come out 2x wrong, pin mapping and the LQFP32 bonded pads, analogRead resolution and reference errors, analogWrite hitting the DAC, EEPROM vanishing after upload, 80 mA outputs, upload failures over CH340/CH9340/HT42B534, SWD recovery, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the Guition JC4880P443C_I_W (JC4880P443, JC4880P443C, often mistyped JC4880P433) — a 4.3" 480x800 IPS touch display board on the JC-ESP32P4-M3 module (ESP32-P4NRW32, 32 MB PSRAM, 16 MB flash, ESP32-C6 Wi-Fi co-processor on SDIO) — its ST7701S MIPI-DSI panel, GT911 touch, backlight, ES8311 codec with speaker amp and mic, microSD, RS485, battery charger, 2x13 header, and the PlatformIO + ESP-IDF (pioarduino) setup around them. Use when working on this board: project setup, platformio.ini and sdkconfig.defaults, the P4 silicon revision and an "Illegal instruction" boot, a black DSI screen, ST7701 init sequence and timings, GT911 init errors, backlight PWM, choosing a free GPIO, Wi-Fi through esp_hosted and esp_wifi_remote, SD card, audio, flashing over USB-C, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the 38-pin ESP32-WROOM-32 development board — Espressif ESP32-DevKitC V4, Ai-Thinker NodeMCU-32S, DOIT ESP32 DevKit V1 38-pin and their CH340/CP2102 clones, 19 pins per side, with GPIO0 and the six in-package flash pins (GPIO6-11, labelled D0 D1 D2 D3 CMD CLK or SD0-SD3) broken out. Use when working on a 38-pin ESP32 devkit (ESP32-D0WDQ6 / ESP32-D0WD-V3, ESP-WROOM-32 or ESP32-WROVER module): project setup, platformio.ini and sdkconfig for ESP-IDF or Arduino, pin mapping and which GPIOs are safe, the flash-pin and IO0 traps, WROVER GPIO16/17 PSRAM conflict, strapping pins, ADC1 vs ADC2 with Wi-Fi, SPI speed and IO_MUX pins, deep sleep and RTC wake pins, flashing, BOOT/EN recovery, brownouts, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the 30-pin NodeMCU ESP8266 devkit — NodeMCU DevKit V1.0 / Amica (CP2102) and LoLin NodeMCU V3 (CH340G), built on the Ai-Thinker ESP-12E or ESP-12F module (ESP8266EX, 4 MB flash), with PlatformIO and the Arduino ESP8266 core (`board = nodemcuv2`). Use when working on a NodeMCU, ESP-12E, ESP-12F or ESP8266 devkit: project setup, platformio.ini, the D0-D10 vs GPIO numbering, which pins are safe and which break the boot, GPIO15/GPIO0/GPIO2 strapping, the A0 divider and 1 V ADC, software I2C and software PWM, analogWrite range, LittleFS and flash layouts, OTA, deep sleep and the missing GPIO16-to-RST link, Wi-Fi, heap exhaustion, watchdog and Soft WDT resets, exception decoding, flashing over CP2102/CH340, or debugging why the board does not boot, prints garbage, or reboots by itself.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the ProMicro nRF52840 (V1940) — the nice!nano v2 compatible clone also sold as SuperMini nRF52840, nRF52840 Pro Micro or nRFMicro (nRF52840 QIAA, Cortex-M4F @ 64 MHz, 1 MB flash / 256 KB RAM, BLE 5 + 802.15.4, native USB, Adafruit UF2 bootloader with SoftDevice S140). Covers the PlatformIO + Adafruit nRF52 Arduino setup for a board that ships in neither, the vendored board definition and Pro Micro pin map, USB CDC via TinyUSB, Bluefruit BLE, the 32.768 kHz crystal that clones omit, SAADC pins, NFC pins as GPIO, and Zephyr's promicro_nrf52840 board target. Use when working on this board or any nice!nano v2 / ZMK keyboard controller: project setup, platformio.ini, pin mapping, LED not blinking, double-tap RESET and UF2/DFU flashing, SoftDevice version mismatches, a board that enumerates but never runs, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the Raspberry Pi Pico (original, RP2040 — dual Cortex-M0+ @ 133 MHz, 264 KB SRAM, 2 MB QSPI flash) — its 26 exposed GPIO, 4-channel 12-bit ADC, 16-channel PWM, 2× UART/I2C/SPI, PIO state machines, USB 1.1 CDC, VSYS/VBUS/SMPS power wiring, and the PlatformIO + arduino-pico (earlephilhower) setup around them. Use when working on this board, any Pico H or Pico clone, or a bare RP2040: project setup, platformio.ini, the earlephilhower-vs-Mbed core choice, pin mapping, USB CDC serial, analogRead/analogWrite behaviour, Wire/SPI defaults, battery power, EEPROM emulation, BOOTSEL/UF2 flashing, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the WeAct Studio RP2350A Core Board (RP2350A — dual Cortex-M33 @ 150 MHz, 520 KB SRAM, 4 MB or 16 MB QSPI flash) in both of its revisions, RP2350A_V10 and RP2350A_V20 — the 40-pin Pico-2-shaped header, 3-or-4-channel 12-bit ADC, PWM, PIO, USB-C CDC, the V1.0 LDO vs V2.0 buck-boost power wiring, and the PlatformIO + arduino-pico (earlephilhower) setup around them. Use when working on this board, a WeAct RP2350 core board of unknown revision, or any Raspberry Pi Pico 2 / RP2350A clone: project setup, platformio.ini, board = rpipico2 vs weact_rp2350b, telling V1.0 and V2.0 apart, pin mapping, LED and KEY pins, powering it from a battery, 4 MB vs 16 MB flash, erratum RP2350-E9 pull-down trouble, BOOT/RESET UF2 flashing, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the Guition JC-ESP32P4-M3-DEV board (JC-ESP32P4-M3 module — ESP32-P4NRW32 with 32 MB in-package PSRAM, 16 MB flash, and an ESP32-C6 radio co-processor on SDIO) — its MIPI-DSI panel and MIPI-CSI camera connectors, IP101 Ethernet, ES8311 codec with speaker amplifier and microphone, microSD on SDMMC, RS485, three USB-C sockets, the 26-pin JP1 header, and the PlatformIO + ESP-IDF (pioarduino) setup around them. Use when working on this board or any ESP32-P4 devkit: project setup, platformio.ini and sdkconfig.defaults, the silicon revision split between rev v1.3 and rev v3.x, why the bootloader dies with "Illegal instruction", the pin map and which header pins are traps, Wi-Fi through esp_hosted and esp_wifi_remote, mounting the TF card and its on-chip LDO, bringing up a DSI panel, the shared I2C bus, audio direction and the amplifier enable, Ethernet RMII pins, choosing a free GPIO, flashing over any of the three USB-C ports, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。