本文へ移動
cccskills
無料GitHub で公開

REPLACE-with-skill-name

Firmware development for the <VENDOR> <BOARD NAME> (<MCU PART NUMBER>) — its <peripheral>, <peripheral>, <peripheral>, and the <SDK/HAL> + <build system> setup around them. Use when working on this board or any <compatible siblings>: project setup, <config file>, clock configuration, pin mapping, peripheral bring-up, <the board's headline concern>, flashing, or debugging why something on the board does not work.

alexex1993/mcu-skills
インストール方法を見る

含まれるファイル（5）

  • SKILL.md2.8 KB
  • assets/IMAGE.md18 B
  • reference/board-hardware.md973 B
  • reference/recipes.md215 B
  • template/README.md382 B

SKILL.md（原文）

インストールする前に、エージェントに与えられる指示の中身を確認できます。

<Vendor> <Board> (<MCU>)

<One paragraph: what this board is, and what the reference files hold. Say explicitly that the detail lives in the reference files and should be read rather than guessed at.>

  • reference/board-hardware.md — <what it answers>
  • reference/recipes.md — <what it answers>
  • template/ — a complete working project that builds and flashes, plus a scaffolding script.

Orientation

MCU<part number, core, flash, RAM, package>
Clocks<crystals populated, and the clock tree that is known to work>
Display<controller, resolution, bus, pins>
LED / button<pin and polarity for each>
Storage<internal / external flash, SD, PSRAM, with addresses>
USB<peripheral, pins, bootloader behaviour>
Debug<SWD/JTAG/UART header and pins>

<Delete rows that don't apply; add rows the board needs.>

Rules that prevent the expensive mistakes

<10–15 numbered rules from your bring-up log. Each is imperative and carries its consequence. Template for one entry:>

  1. <the setting, in code form> — <why the board needs it>. Without it, <the symptom, which should not obviously point back at this setting>.

When the task is <the thing this board is used for>

<The one or two areas where the naive approach is badly wrong. Give the mechanism and the numbers, so the model can generalise past the case you wrote down. Delete if the board has none.>

Starting a new project

Do not hand-assemble one. template/ is a verified-working project — scaffold from it:

~/.claude/skills/<skill-name>/template/variants/new-project.sh <target-dir> [--full|--minimal]
cd <target-dir> && <build command>
  • --full (default) — <what it contains>. <flash cost>.
  • --minimal — <what it contains>. <flash cost>. Use it to prove the toolchain and the flashing route before adding anything.

When the user already has a project, prefer bringing it in line with the template's <config file> over rewriting their code.

Flashing

<The full keystroke-level sequence. What enumerates as what. What the board will not do for itself. How to recover a bricked board. The alternative route (probe/SWD) and when it's needed.>

Reporting

State honestly what was verified on hardware versus derived from the datasheet. <Name the specific settings here that are outside published specs and merely work on this board.>

レビュー

まだレビューはありません。使ってみた感想をお寄せください。

ログインしてレビューを書く

同じリポジトリのスキル

概要と使いどころ

atmega328p-nano

無料

Firmware development for the Arduino Nano (A000005, ATmega328P @ 16 MHz, 5 V) — its 30 KB usable flash, 2 KB SRAM, 1 KB EEPROM, 8-channel 10-bit ADC, six 8-bit PWM pins across three timers, UART shared with the USB-serial chip, I2C on A4/A5, SPI on D10–D13, sleep modes, and the Arduino AVR core + PlatformIO setup around them. Use when working on this board or any ATmega328P Nano clone (FTDI or CH340 USB): project setup, platformio.ini, old-vs-new bootloader uploads, pin mapping, A6/A7 restrictions, timer/Servo/tone conflicts, the 2 KB SRAM budget, analog references, powering from VIN, ICSP recovery, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

alexex1993/mcu-skills182026年9月25日 更新

atmega32u4-beetle

無料

Firmware development for the Beetle — the CJMCU / DFRobot "Mini Arduino Leonardo" USB board (ATmega32U4 @ 16 MHz, 5 V, 21×28 mm, castellated pads) — its native USB (CDC serial + HID keyboard/mouse/joystick), Caterina bootloader and 1200 bps touch upload, ten exposed I/O pads, four PWM pins across Timer0/Timer1, five ADC channels, I2C on D2/D3, SPI on the back-side ICSP pads, 28 KB usable flash and 2.5 KB SRAM, and the PlatformIO + Arduino AVR core (`board = leonardo`) setup around them. Use when working on this board or any ATmega32U4 Leonardo/Micro/Pro-Micro-class clone: project setup, platformio.ini, why the board shows up as two different serial ports, uploads that fail or hang, recovering a bricked or HID-spamming board by shorting the ICSP reset pads, pin mapping and which pads are missing, PWM/timer conflicts, Servo and tone, USB HID keyboard projects, the SRAM budget, powering from the + pad, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

alexex1993/mcu-skills182026年9月25日 更新

beu1000-evuba

無料

Разработка прошивок для BE-U1000 (Baikal Electronics / Байкал Электроникс, три ядра RISC-V: BR-350 и BM-310) на отладочных платах EVU-BA-2.1, EVU-BA-2.0 и EVU-BA-1.2 — её eFlash и QSPI flash, UART0/BootROM CLI, PWMA (захват и импульсы), АЦП с DMA, CAN FD, SPI, WDT, CLIC, а также SDK Байкала и его система сборки на make. Use when working on this board or any BE-U1000 / BMCU_U project (SDK 2.1/2.3, riscv32-none-elf, dfu-util, OpenOCD): настройка проекта, Makefile и MEM_REG_ROM, карта выводов и разъёмы XP1/XP8/XP9/XP10, режимы начальной загрузки и страповые выводы, прошивка по UART XMODEM либо USB DFU, работа с eFlash и TCM, прерывания и CLIC, отладка по JTAG — и разбор, почему плата молчит, не стартует, зависает или почему периферия «настроилась», а обмена нет.

日本語の概要は準備中です。原文の説明を表示しています。

alexex1993/mcu-skills182026年9月25日 更新

esp32-wroom-30pin

無料

Firmware development for the 30-pin ESP32-WROOM-32 development board — the DOIT ESP32 DevKit V1 / ESP32 CH340 Type-C / NodeMCU-ESP32 30-pin form factor, 15 pins per side, CH340G or CP2102 USB-UART bridge, AMS1117 LDO, user LED on GPIO2. Use when working on a 30-pin ESP32 devkit (ESP32-D0WDQ6 / ESP32-D0WD-V3, ESP-WROOM-32 module): project setup, platformio.ini and sdkconfig for ESP-IDF or Arduino, pin mapping and which GPIOs are safe, strapping pins, ADC1 vs ADC2 with Wi-Fi, SPI speed and IO_MUX pins, I2C, deep sleep and RTC wake pins, flashing over the CH340 bridge, BOOT/EN recovery, brownouts, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

alexex1993/mcu-skills182026年9月25日 更新

esp32-wroom-36pin

無料

Firmware development for the 36-pin ESP32-WROOM-32 development board — the original DOIT ESP32 DevKit V1 with 18 pins per side, i.e. the 30-pin layout plus the six in-package flash pins (SD0 SD1 SD2 SD3 CMD CLK = GPIO6-11) broken out at the USB end, CH340G or CP2102 bridge, AMS1117 LDO, user LED on GPIO2, GPIO0 not on the header. Use when working on a 36-pin ESP32 devkit (ESP32-D0WDQ6 / ESP32-D0WD-V3, ESP-WROOM-32 module), or when identifying which ESP32 board size you have: project setup, platformio.ini and sdkconfig for ESP-IDF or Arduino, pin mapping and which GPIOs are safe, the flash-pin trap, strapping pins, ADC1 vs ADC2 with Wi-Fi, SPI speed and IO_MUX pins, deep sleep and RTC wake pins, flashing, BOOT/EN recovery, brownouts, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

alexex1993/mcu-skills182026年9月25日 更新

esp32-wroom-38pin

無料

Firmware development for the 38-pin ESP32-WROOM-32 development board — Espressif ESP32-DevKitC V4, Ai-Thinker NodeMCU-32S, DOIT ESP32 DevKit V1 38-pin and their CH340/CP2102 clones, 19 pins per side, with GPIO0 and the six in-package flash pins (GPIO6-11, labelled D0 D1 D2 D3 CMD CLK or SD0-SD3) broken out. Use when working on a 38-pin ESP32 devkit (ESP32-D0WDQ6 / ESP32-D0WD-V3, ESP-WROOM-32 or ESP32-WROVER module): project setup, platformio.ini and sdkconfig for ESP-IDF or Arduino, pin mapping and which GPIOs are safe, the flash-pin and IO0 traps, WROVER GPIO16/17 PSRAM conflict, strapping pins, ADC1 vs ADC2 with Wi-Fi, SPI speed and IO_MUX pins, deep sleep and RTC wake pins, flashing, BOOT/EN recovery, brownouts, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

alexex1993/mcu-skills182026年9月25日 更新

alexex1993 のスキルをすべて見る

このスキルの問題を報告する