Wearables Calls and Messages

Purpose

Handle call and text-message requests that originate on a wearable. Resolve a named recipient for a new call or message from that wearable's synced contacts. For an incoming or still-dialing call, send the requested call control directly to the originating wearable. Do not silently hand an action to a paired phone.

An ordinary request such as "call Alice" means a native call where the user speaks. This workflow does not cover a request for the assistant to conduct the conversation itself.

Emergency calls

If the user asks to call the 911 emergency line, including "nine one one" or a formatted variant, do not search contacts or invoke any call command. Tell the user immediately that glasses cannot place 911 calls and that they need to use their phone to call 911. A request to call a non-emergency police, fire, or ambulance number remains an ordinary call. The same is true for a personal contact whom the user describes as their emergency contact.

If any call attempt returns emergency-unsupported, treat that result as terminal even when the request did not match the rule above or contact lookup resolved a name to 911. Report the restriction immediately. Do not perform another lookup or retry through another advertised calling command or device.

Default workflow: use the current wearable

For every native call or message action in this skill, use the originating glasses' device id from the current user turn's [device_id=...] tag. This tag is already the exact paired-device id. Do not call device.list or device.describe before the call, message, or call-control command: the documented command ids and argument shapes below are the default, and device.invoke validates them against the device's current advertisement before dispatch.

Keep that same device id for the initial stored-contact lookup and the final action. A complete zero-candidate stored search may use other paired devices for lookup only, as described in recovery below; it never changes the action device, and the user must explicitly confirm a disclosed fallback match before it can authorize a call or message. Only an explicit request to use another device overrides the action target; follow the exceptions below in that case.

Answer, decline, or cancel a call immediately

For a direct request to answer or pick up an incoming call, use the answer action. For a request to reject an incoming call or send it to voicemail, use decline. For a request to stop an outgoing call that is still dialing, use cancel. The device decides whether a matching call exists; do not search for call state or ask whether a call is ringing or dialing first. An attempted control on a device without such a call is harmless.

These are not controls for an already connected phone call or for this voice conversation. Do not interpret "hang up", "end the call", a conversational sign-off, or an unrelated "cancel" as an outgoing-call cancellation. A brief "never mind" means cancel the outgoing call only when the immediately preceding context makes that intent clear. A bare device name or ordinal selects a call control only when it answers your immediately preceding device clarification for that same action.

Immediately call device.invoke once on the selected device with command wearables.comms.resolve.call and params_json containing just the selected action (answer, decline, or cancel). Use the documented action schema; dispatch validates it against the current advertisement. Skip contact lookup and other discovery. Do not automatically retry a failure or uncertain result except for the pre-dispatch compatibility recovery below.

Resolve a recipient

Skip contact lookup when the user supplied a complete phone number. Otherwise, search the stored contacts first, even when the wearable is online:

device-data contacts search --match-mode ranked --device <selected_device_id> \
  --query <contact_name>

Pass --phone-label <label> when the user requested a mobile, home, work, or other saved number, and --locale <bcp-47> when the caller's locale is known. Ranked results are candidates, not authorization to act. Inspect the complete result, including selection_evidence, every candidate's match, and every candidate's phone_selection, before invoking a command.

• Treat exact_full, exact_tokens, nickname, and phonetic candidates as plausible interpretations of a spoken name. An exact textual match does not outrank a plausible homophone: the transcript's spelling came from speech recognition, not the user. When requires_spoken_name_clarification is true, ask a short clarification before invoking. Use each collision entry's spoken_spelling when pronunciation alone cannot distinguish the names. More than one plausible candidate with different phone destinations also requires clarification, even when the first candidate is an exact match.
• Resolve a phone line separately after resolving the person. If requires_phone_clarification is true, ask which saved line to use unless the user explicitly selected one of the numbered line options you presented. If requested_label_match_count is zero, say that no saved number has the requested label. If distinct_usable_phone_count is zero, ask the user for a number. Otherwise present the available lines under the rules below and use one only after the user selects it. When only one line remains, an explicit confirmation selects it. Never choose the first or preferred-order number. Multiple stored forms grouped into one phone option are one destination, not an ambiguity.
• Do not invoke a call or message from an incomplete search, a weak or unresolved name match, or an unresolved phone choice.

Ask for clarification

When there are at most five selectable contact and phone-line combinations, give one numbered option for each, keeping ranked contact order and the returned phone-option order. Include the contact name, its spoken_spelling when it has a spoken-name collision, and a concise phone label when the contact has multiple lines. If labels are missing or repeated, add the option's spoken_suffix so every spoken choice remains distinguishable. Add an organization only when it helps distinguish otherwise similar contacts. Use commas between spelled letters and digits so TTS speaks them separately. For
example:

"1, Sean, spelled S, E, A, N, mobile. 2, Shawn, spelled S, H, A, W, N, work. Which one should I call?"

When presenting numbered options, end with a question that matches the requested action: "Which one should I call?" for a call or "Which one should I message?" for a message. Build message options with the same rules as call options, and never replace a bounded numbered list with a bare name question.

When more than five combinations remain, or the search is incomplete, do not read a partial list. Ask one short question that narrows the person first, such as their last name or organization, then search again. If one resolved contact still has more than five lines, narrow by phone label or final digits before presenting options.

Only after you actually presented the complete numbered list may an ordinal on the next turn select its corresponding option. A name, spelling, organization, or phone label selects an option only when it identifies exactly one of them. A bare contact name does not choose a line when that contact still has multiple numbered line options. A repeated bare name also does not resolve a spoken-name collision, because ASR may choose the same spelling again; require the option number, deliberate spelling, or another distinguishing detail. Do not reorder the presented options while interpreting the answer.

If the stored search does not resolve exactly one recipient and line, do not invoke the call or message command. A complete zero-candidate search may use the cross-device recovery below. Otherwise follow the clarification rules.

Place a call

Call device.invoke on the selected wearable with command wearables.comms.provider.call. Set params_json.phone_number to the supplied or resolved number and params_json.provider to phone. Always set params_json.contact_name too: use the resolved contact name when available, or the supplied phone number otherwise. Do not call device.describe first. Dispatch rejects a device that does not currently support the command or arguments.

Send a message

Require both a resolved recipient and the message text. Select the native SMS command by calling device.invoke on the selected wearable with command wearables.comms.native.sms. Set params_json.phone_number to the supplied or resolved number and params_json.message to the user's text; include params_json.contact_name when a named contact was resolved. Do not call device.describe first. Dispatch rejects a device that does not currently support the command or arguments.

Apply the recipient and phone-line resolution and clarification rules above before sending; a supplied message body is not evidence for choosing a recipient. When clarification is required, keep the user's original message text unchanged. Once those rules resolve exactly one recipient and line, send that original text to it without asking the user to repeat it. Do not send to any candidate before then.

Do not substitute a draft or send command from a paired phone. If the wearable cannot send the message, report that instead of creating a draft somewhere the user may never see.

Recovery and explicit device overrides

The user selected another device

Call device.list to map the user's description to the intended device. If more than one device fits, ask which one they mean. For answer, decline, or cancel, invoke the fixed call-control command on the selected device without calling device.describe. For a new call or message, call device.describe on the selected device, then use its advertised call or SMS command and schema instead of the fixed wearable commands above.

The current turn has no device id

When the user named no device and the current turn has no trustworthy device id, call device.list only to find the one is_request_origin: true device. If it cannot identify one, explain that you cannot tell which device to use.

Stored contacts returned no candidates

Do not use another device to settle a weak, ambiguous, incomplete, or numberless result from the selected device. Search other devices only when the selected device's stored search is complete and its count is zero. If it returns any candidate, including a weak one, follow the resolution and clarification rules above instead.

After a complete zero-candidate result, call device.list and search the stored contacts on every other paired device:

device-data contacts search --match-mode ranked --device <fallback_device_id> \
  --query <contact_name>

Finish every fallback-device search before choosing, and treat all results as one candidate set under the resolution and clarification rules above. If any search is incomplete or the combined set does not resolve exactly one recipient and line, ask for clarification. Once exactly one recipient and line remain, present that fallback match as one numbered option, say that it came from another paired device, and ask the user to confirm it for the requested call or message. Only an affirmative answer to that disclosed confirmation authorizes using the fallback phone number. Then invoke the selected wearable. Never invoke a fallback device.

Only when every stored search is complete and each has count zero, inspect the selected device's description, reusing it if an explicit device override already required one. If it advertises contacts.search, invoke that command on the selected device with its advertised schema. This live lookup is the one exception to the default workflow. Do not run a live contact search on any device before exhausting the stored searches, and never run one on a fallback device.

The advertised command or schema changed

If the documented call, message, or call-control invocation returns node_command_unsupported or invalid_command_params, it was rejected before dispatch. Call device.describe once on the same selected device and inspect its current commands and schemas. If it advertises a compatible command for the requested action, retry once using that command and its advertised schema. Ask for any newly required user input rather than inventing it. If there is no compatible command, report that the selected device cannot perform the action.

Do not use this recovery for a timeout, interruption, transport error, or any other failed or uncertain result: the action may already have happened. Do not switch devices during recovery.

Never silently switch to a paired phone or another wearable because the selected device is unavailable or rejects the command.

Report the result

• Report success only when device.invoke reports success.
• For call controls, inspect the device's result too: an inner ok: false or error is a failure even if the outer tool call succeeded. If there was no incoming or outgoing call to control, say so briefly without retrying.
• Relay a useful device-provided failure explanation without exposing internal command names or private contact details.
• Do not blindly retry a timed-out, interrupted, or uncertain call, send, or call control; the action may already have happened.