EcoSIM Plant Trait Sanity Check

Overview

Use this skill to sanity-check EcoSIM plant_trait.*.desc files. These files are strictly read-only: never edit, overwrite, patch, or generate a replacement .desc file. Each PLANT traits for FUNCTIONAL TYPE block represents one plant, and the default check is intentionally confined to the first grid only: NY=1, NX=1. All active plant blocks at that grid are checked.

The check has two layers:

• deterministic file checks for malformed values, units, ranges, and block consistency
• web-informed ecological checks using species, genus, or plant-functional-type evidence gathered during the task

Always back parameter-value judgments for plant_trait.*.desc files with web search unless the user explicitly asks for an offline/local-only check. Treat deterministic checker results as a first pass, not as sufficient evidence that ecological or physiological parameter values are correct.

Workflow

1. Locate the target plant_trait.*.desc file. If the user gives no path, prefer a local path they recently mentioned, then search under data/, then under the repository.
2. For calibration or run readiness, run the deterministic checker in strict physiology mode:

python3 .agents/skills/ecosim-plant-trait-sanity-check/scripts/check_plant_trait_desc.py /absolute/path/to/plant_trait.1930.desc --strict-physiology

Omit --strict-physiology only for an exploratory review where physiological findings should remain warnings. Strict mode promotes physiological-consistency warnings to errors and returns a nonzero status.

3. Keep the default grid scope unless the user explicitly asks for another grid. The default is equivalent to:

python3 .agents/skills/ecosim-plant-trait-sanity-check/scripts/check_plant_trait_desc.py /absolute/path/to/plant_trait.1930.desc --ny 1 --nx 1

4. Use web search to gather trait evidence for each first-grid plant block. Read references/web_evidence.md, then search for the plant name, likely taxon, or functional type plus trait terms. For ndlf35, woak35, US-Me2, or US-xSP/SOAP work, also read references/pft_case_notes.md.
5. Convert the evidence into EcoSIM units and save a temporary evidence JSON file. Use species-level evidence when available; otherwise use genus, family, or functional-type evidence and mark that evidence level.
6. Re-run the checker with the evidence file:

python3 .agents/skills/ecosim-plant-trait-sanity-check/scripts/check_plant_trait_desc.py /absolute/path/to/plant_trait.1930.desc --web-evidence /absolute/path/to/web_evidence.json

7. Report findings by severity. Lead with ERROR findings, then WARN findings, and include the plant code, grid tuple, parameter name, source line, and web source when applicable.
8. If there are no findings, state that the first-grid plant blocks passed both deterministic and web-informed checks and mention how many plants and parameters were inspected.

What Is Checked

The checker validates the plant blocks at the selected grid for:

• required EcoSIM trait sections
• parseable finite numeric values in numeric sections
• fraction variables within [0, 1]
• positive rates, capacities, dimensions, uptake parameters, resistance terms, and nutrient ratios
• CLASS as four inclination fractions that sum to one
• optical albedo plus transmission not exceeding one
• pathway-specific Rubisco Kc, Ko, carboxylation:oxygenation turnover ratio, and implied CO2/O2 specificity
• Rubisco and PEPC fractions of total leaf N implied by their allocations within the N/P-limited total leaf-protein pool
• leaf and root protein C supported jointly by N and P in active structural biomass, with only active root biomass used for woody PFTs
• C4 protein-normalized Vpmax:Vcmax and a lower-priority, model-formulation-sensitive C3/C4 Jmax:Vcmax diagnostic
• pathway-specific FCO2, C4 mesophyll chlorophyll partitioning, and PAR/shortwave absorptance
• total photosynthetic protein allocation without double-counting the shared leaf-protein pool
• SLA1 against explicit species- or site-specific web evidence, without using SLA to infer photosynthetic kinetics
• ANGSH = 0 for plant forms without petiole or sheath tissue, including conifer, lichen, and moss PFTs
• osmotic potential sign and standing dead biomass sign
• growth yield bounds
• N and P concentration magnitudes
• class-information conventions, including that annual plants are treated as evergreen in EcoSIM
• woody versus herbaceous root trait consistency
• cross-parameter checks such as PhiMIN <= PhiMAX and fine-root radius not exceeding primary-root radius
• RSRR radial root resistivity, its implied fully wetted conductivity, and its interaction with soil drying and total root resistance
• literal RVSR conduit radius, conifer tracheid anatomy, conduit geometry relative to RRAD2M, and ARSRA resistance correction

Read references/sanity_rules.md before expanding the checker or interpreting a borderline warning. Read references/web_evidence.md before making web-informed trait comparisons. Use references/pft_case_notes.md for retained project evidence and interpretation caveats for previously studied PFT/site combinations.

Web-Informed Evidence

The script does not browse by itself. Codex must do the web search, evaluate sources, convert values into EcoSIM units, and provide the evidence as JSON. This keeps the check reproducible and prevents untraceable web-derived warnings.

Use this JSON shape:

{
  "plants": [
    {
      "pft_code": "woat35",
      "nz": 3,
      "ny": 1,
      "nx": 1,
      "taxon": "Avena fatua",
      "numeric_ranges": [
        {
          "variable": "RUBP",
          "min": 0.05,
          "max": 0.35,
          "unit": "gC rubisco gC protein-1",
          "source": "literature-derived protein-allocation range",
          "url": "https://example.org/source",
          "evidence_level": "species",
          "conversion_note": "Range must match EcoSIM's total-leaf-protein basis."
        }
      ],
      "categorical_expectations": [
        {
          "variable": "ICTYP",
          "contains": "C3",
          "source": "USDA/NRCS or species profile",
          "url": "https://example.org/source",
          "evidence_level": "species"
        }
      ]
    }
  ]
}

Web evidence findings default to WARN because literature and trait database ranges vary with species, site, phenology, and measurement protocol. Use severity: "ERROR" in the evidence JSON only when a value is unequivocally impossible or contradicts a required categorical identity. Do not use external deciduous foliage descriptions to override the EcoSIM convention that annual plants are represented as evergreen in IWTYP.

For photosynthetic-property checks, interpret RUBP, PEPC, and CHL as fractions of the same total leaf-protein pool. Derive that pool from the smaller of the N- and P-supported amounts in active leaf structural biomass. All leaf structure is active; all non-tree root structure is active; for trees, apply root protein relationships only to active structural root biomass and exclude lignified heartwood. Separate CNRTLIG and CPRTLIG trait inputs are not required. Check SLA1 only as an independently evidenced morphological trait. Do not use SLA1 to back-calculate leaf-area Vcmax, Jmax, or other photosynthetic capacities unless the model mapping and all required conversions are explicitly supported.

Interpret RVSR as the literal arithmetic mean lumen radius of root water conduits: tracheids for conifers and vessel elements for angiosperms. Do not use an effective hydraulic radius or tune RVSR to absorb pit and end-wall resistance; use ARSRA for that correction. Convert published conduit diameters to radius in meters before adding web evidence.

Interpret RSRR as radial root resistivity per unit root surface area in MPa h m-1, not as conductivity. Convert it to the fully wetted intrinsic radial conductivity with k_radial = 1/(3600*RSRR) in m s-1 MPa-1. High RSRR means low radial conductivity. Review it separately from RVSR and ARSRA, which control axial transport, and remember that EcoSIM further increases radial resistance as the soil micropore water fraction declines.

Treat every root-resistance equation and parameter interpretation as EcoSIM-code-version dependent. Before diagnosing or transferring RSRR, RVSR, or ARSRA, verify the active model revision and record its commit or version when available. Recheck radial-resistance assembly, soil-moisture modifiers, conduit-count geometry, and axial-resistance scaling in that revision; the formulas documented here describe the inspected implementation and are not guaranteed across versions.

Parser Notes

The parser treats each block header as a plant identity record:

PLANT traits for FUNCTIONAL TYPE (NZ,NY,NX)= <NZ> <NY> <NX> <pft_code>

Parameter names are not globally unique, so preserve file order and section context when discussing findings.

Trait descriptions sometimes contain colons, such as Leaf length:width ratio; split parameter values at the final colon in a row.

Output Options

Use Markdown output for human review:

python3 .agents/skills/ecosim-plant-trait-sanity-check/scripts/check_plant_trait_desc.py /absolute/path/to/plant_trait.1930.desc

Enforce physiological consistency for calibration and run readiness. The model-formulation-sensitive Jmax:Vcmax diagnostic remains a warning:

python3 .agents/skills/ecosim-plant-trait-sanity-check/scripts/check_plant_trait_desc.py /absolute/path/to/plant_trait.1930.desc --strict-physiology

Use JSON output for automated pipelines:

python3 .agents/skills/ecosim-plant-trait-sanity-check/scripts/check_plant_trait_desc.py /absolute/path/to/plant_trait.1930.desc --json

Use web evidence in either Markdown or JSON mode:

python3 .agents/skills/ecosim-plant-trait-sanity-check/scripts/check_plant_trait_desc.py /absolute/path/to/plant_trait.1930.desc --web-evidence /absolute/path/to/web_evidence.json --json

The script returns a nonzero status when ERROR findings are present or when no blocks match the requested grid. With --strict-physiology, physiological-consistency warnings are promoted to ERROR except the model-formulation-sensitive Jmax:Vcmax diagnostic, which remains a lower-priority WARN. Unrelated ecological warnings also remain warnings.

Reporting Guidance

Never edit the trait file. This skill is a diagnostic pass. Report recommended corrections and, when the user asks to apply them, update the corresponding ecosim_pftpar_*.nc file through the ecosim-pftpar-editor skill and ParamEditor.py.

When summarizing results, make clear that the check is scoped to the first grid by default, not the full file. If repeated grid columns exist, say how many total blocks were present and how many first-grid plant blocks were inspected.

Always report each checked plant's RSRR and implied fully wetted k_radial, even when the value passes the deterministic screen. For a high RSRR warning, recommend a sensitivity test and diagnose whether radial resistance dominates total root resistance during moist periods before proposing an edit.

For root-hydraulic findings, report the EcoSIM source version or commit used to verify the equations. If the source revision is unavailable, label equation-level conclusions as version-unverified.

When trait plausibility is being inferred from EcoSIM output, condition GPP, LAI, height, biomass, and mortality judgments on cohort age and initialization. A cohort emerging from seed in the simulation must be compared with seedlings or young stands, not the mature AmeriFlux stand observed at the same location. Treat WTSTDI as an initial-condition pool tied to the simulation start date and disturbance history, not as an intrinsic PFT trait.