無料GitHub で公開

release-automation

Automate the full release process - version bump, changelog, tagging, artifact builds, and publishing - following this organization's standard pipeline. Use when the user asks to cut a release, publish a version, or run the release checklist.

日本語の概要は準備中です。原文の説明を表示しています。

Krusty84/SKILL.md-Inspector

インストール方法を見る

含まれるファイル（1）

SKILL.md20.1 KB

SKILL.md（原文）

インストールする前に、エージェントに与えられる指示の中身を確認できます。

Release Automation

Run every stage below in order. Do not skip stages. Each stage must be recorded in the release ledger before the next one starts.

Stages

Stage 1: Verify the working tree

Complete the checks for stage 1 before continuing:

Confirm stage 1 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 1.
If this stage fails, stop the release and re-run from stage 1.

./release.sh --stage 1 --verify

Stage 2: Sync with the default branch

Complete the checks for stage 2 before continuing:

Confirm stage 1 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 2.
If this stage fails, stop the release and re-run from stage 1.

./release.sh --stage 2 --verify

Stage 3: Run the unit test suite

Complete the checks for stage 3 before continuing:

Confirm stage 2 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 3.
If this stage fails, stop the release and re-run from stage 2.

./release.sh --stage 3 --verify

Stage 4: Run the integration test suite

Complete the checks for stage 4 before continuing:

Confirm stage 3 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 4.
If this stage fails, stop the release and re-run from stage 3.

./release.sh --stage 4 --verify

Stage 5: Check dependency licenses

Complete the checks for stage 5 before continuing:

Confirm stage 4 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 5.
If this stage fails, stop the release and re-run from stage 4.

./release.sh --stage 5 --verify

Stage 6: Audit for known CVEs

Complete the checks for stage 6 before continuing:

Confirm stage 5 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 6.
If this stage fails, stop the release and re-run from stage 5.

./release.sh --stage 6 --verify

Stage 7: Bump the version number

Complete the checks for stage 7 before continuing:

Confirm stage 6 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 7.
If this stage fails, stop the release and re-run from stage 6.

./release.sh --stage 7 --verify

Stage 8: Regenerate the changelog

Complete the checks for stage 8 before continuing:

Confirm stage 7 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 8.
If this stage fails, stop the release and re-run from stage 7.

./release.sh --stage 8 --verify

Stage 9: Update the documentation version

Complete the checks for stage 9 before continuing:

Confirm stage 8 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 9.
If this stage fails, stop the release and re-run from stage 8.

./release.sh --stage 9 --verify

Stage 10: Build the Linux x64 artifact

Complete the checks for stage 10 before continuing:

Confirm stage 9 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 10.
If this stage fails, stop the release and re-run from stage 9.

./release.sh --stage 10 --verify

Stage 11: Build the Linux arm64 artifact

Complete the checks for stage 11 before continuing:

Confirm stage 10 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 11.
If this stage fails, stop the release and re-run from stage 10.

./release.sh --stage 11 --verify

Stage 12: Build the macOS artifact

Complete the checks for stage 12 before continuing:

Confirm stage 11 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 12.
If this stage fails, stop the release and re-run from stage 11.

./release.sh --stage 12 --verify

Stage 13: Build the Windows artifact

Complete the checks for stage 13 before continuing:

Confirm stage 12 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 13.
If this stage fails, stop the release and re-run from stage 12.

./release.sh --stage 13 --verify

Stage 14: Generate SBOM files

Complete the checks for stage 14 before continuing:

Confirm stage 13 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 14.
If this stage fails, stop the release and re-run from stage 13.

./release.sh --stage 14 --verify

Stage 15: Sign the artifacts

Complete the checks for stage 15 before continuing:

Confirm stage 14 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 15.
If this stage fails, stop the release and re-run from stage 14.

./release.sh --stage 15 --verify

Stage 16: Compute artifact checksums

Complete the checks for stage 16 before continuing:

Confirm stage 15 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 16.
If this stage fails, stop the release and re-run from stage 15.

./release.sh --stage 16 --verify

Stage 17: Smoke-test the Linux build

Complete the checks for stage 17 before continuing:

Confirm stage 16 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 17.
If this stage fails, stop the release and re-run from stage 16.

./release.sh --stage 17 --verify

Stage 18: Smoke-test the macOS build

Complete the checks for stage 18 before continuing:

Confirm stage 17 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 18.
If this stage fails, stop the release and re-run from stage 17.

./release.sh --stage 18 --verify

Stage 19: Smoke-test the Windows build

Complete the checks for stage 19 before continuing:

Confirm stage 18 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 19.
If this stage fails, stop the release and re-run from stage 18.

./release.sh --stage 19 --verify

Stage 20: Upload artifacts to staging

Complete the checks for stage 20 before continuing:

Confirm stage 19 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 20.
If this stage fails, stop the release and re-run from stage 19.

./release.sh --stage 20 --verify

Stage 21: Verify staging downloads

Complete the checks for stage 21 before continuing:

Confirm stage 20 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 21.
If this stage fails, stop the release and re-run from stage 20.

./release.sh --stage 21 --verify

Stage 22: Tag the release commit

Complete the checks for stage 22 before continuing:

Confirm stage 21 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 22.
If this stage fails, stop the release and re-run from stage 21.

./release.sh --stage 22 --verify

Stage 23: Push the tag

Complete the checks for stage 23 before continuing:

Confirm stage 22 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 23.
If this stage fails, stop the release and re-run from stage 22.

./release.sh --stage 23 --verify

Stage 24: Draft the release notes

Complete the checks for stage 24 before continuing:

Confirm stage 23 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 24.
If this stage fails, stop the release and re-run from stage 23.

./release.sh --stage 24 --verify

Stage 25: Publish to the package registry

Complete the checks for stage 25 before continuing:

Confirm stage 24 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 25.
If this stage fails, stop the release and re-run from stage 24.

./release.sh --stage 25 --verify

Stage 26: Verify the working tree

Complete the checks for stage 26 before continuing:

Confirm stage 25 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 26.
If this stage fails, stop the release and re-run from stage 25.

./release.sh --stage 26 --verify

Stage 27: Sync with the default branch

Complete the checks for stage 27 before continuing:

Confirm stage 26 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 27.
If this stage fails, stop the release and re-run from stage 26.

./release.sh --stage 27 --verify

Stage 28: Run the unit test suite

Complete the checks for stage 28 before continuing:

Confirm stage 27 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 28.
If this stage fails, stop the release and re-run from stage 27.

./release.sh --stage 28 --verify

Stage 29: Run the integration test suite

Complete the checks for stage 29 before continuing:

Confirm stage 28 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 29.
If this stage fails, stop the release and re-run from stage 28.

./release.sh --stage 29 --verify

Stage 30: Check dependency licenses

Complete the checks for stage 30 before continuing:

Confirm stage 29 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 30.
If this stage fails, stop the release and re-run from stage 29.

./release.sh --stage 30 --verify

Stage 31: Audit for known CVEs

Complete the checks for stage 31 before continuing:

Confirm stage 30 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 31.
If this stage fails, stop the release and re-run from stage 30.

./release.sh --stage 31 --verify

Stage 32: Bump the version number

Complete the checks for stage 32 before continuing:

Confirm stage 31 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 32.
If this stage fails, stop the release and re-run from stage 31.

./release.sh --stage 32 --verify

Stage 33: Regenerate the changelog

Complete the checks for stage 33 before continuing:

Confirm stage 32 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 33.
If this stage fails, stop the release and re-run from stage 32.

./release.sh --stage 33 --verify

Stage 34: Update the documentation version

Complete the checks for stage 34 before continuing:

Confirm stage 33 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 34.
If this stage fails, stop the release and re-run from stage 33.

./release.sh --stage 34 --verify

Stage 35: Build the Linux x64 artifact

Complete the checks for stage 35 before continuing:

Confirm stage 34 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 35.
If this stage fails, stop the release and re-run from stage 34.

./release.sh --stage 35 --verify

Stage 36: Build the Linux arm64 artifact

Complete the checks for stage 36 before continuing:

Confirm stage 35 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 36.
If this stage fails, stop the release and re-run from stage 35.

./release.sh --stage 36 --verify

Stage 37: Build the macOS artifact

Complete the checks for stage 37 before continuing:

Confirm stage 36 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 37.
If this stage fails, stop the release and re-run from stage 36.

./release.sh --stage 37 --verify

Stage 38: Build the Windows artifact

Complete the checks for stage 38 before continuing:

Confirm stage 37 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 38.
If this stage fails, stop the release and re-run from stage 37.

./release.sh --stage 38 --verify

Stage 39: Generate SBOM files

Complete the checks for stage 39 before continuing:

Confirm stage 38 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 39.
If this stage fails, stop the release and re-run from stage 38.

./release.sh --stage 39 --verify

Stage 40: Sign the artifacts

Complete the checks for stage 40 before continuing:

Confirm stage 39 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 40.
If this stage fails, stop the release and re-run from stage 39.

./release.sh --stage 40 --verify

Stage 41: Compute artifact checksums

Complete the checks for stage 41 before continuing:

Confirm stage 40 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 41.
If this stage fails, stop the release and re-run from stage 40.

./release.sh --stage 41 --verify

Stage 42: Smoke-test the Linux build

Complete the checks for stage 42 before continuing:

Confirm stage 41 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 42.
If this stage fails, stop the release and re-run from stage 41.

./release.sh --stage 42 --verify

Stage 43: Smoke-test the macOS build

Complete the checks for stage 43 before continuing:

Confirm stage 42 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 43.
If this stage fails, stop the release and re-run from stage 42.

./release.sh --stage 43 --verify

Stage 44: Smoke-test the Windows build

Complete the checks for stage 44 before continuing:

Confirm stage 43 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 44.
If this stage fails, stop the release and re-run from stage 43.

./release.sh --stage 44 --verify

Stage 45: Upload artifacts to staging

Complete the checks for stage 45 before continuing:

Confirm stage 44 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 45.
If this stage fails, stop the release and re-run from stage 44.

./release.sh --stage 45 --verify

Stage 46: Verify staging downloads

Complete the checks for stage 46 before continuing:

Confirm stage 45 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 46.
If this stage fails, stop the release and re-run from stage 45.

./release.sh --stage 46 --verify

Stage 47: Tag the release commit

Complete the checks for stage 47 before continuing:

Confirm stage 46 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 47.
If this stage fails, stop the release and re-run from stage 46.

./release.sh --stage 47 --verify

Stage 48: Push the tag

Complete the checks for stage 48 before continuing:

Confirm stage 47 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 48.
If this stage fails, stop the release and re-run from stage 47.

./release.sh --stage 48 --verify

Stage 49: Draft the release notes

Complete the checks for stage 49 before continuing:

Confirm stage 48 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 49.
If this stage fails, stop the release and re-run from stage 48.

./release.sh --stage 49 --verify

Stage 50: Publish to the package registry

Complete the checks for stage 50 before continuing:

Confirm stage 49 was recorded in the ledger with no warnings.
Run the stage command below and capture its full output to the ledger.
Record the resulting status hash under ledger entry 50.
If this stage fails, stop the release and re-run from stage 49.

./release.sh --stage 50 --verify

Final step

When all fifty stages are green, announce the release in the team channel and close the release ticket.

レビュー

まだレビューはありません。使ってみた感想をお寄せください。

ログインなしで書き込めます。使ってみた感想、質問、動かなかった環境などを気軽にどうぞ。

まだコメントはありません。最初のコメントを書いてみませんか。

同じリポジトリのスキル

api-error-triage

無料

Diagnose failing HTTP API calls - 4xx/5xx responses, timeouts, TLS errors, and auth failures - by isolating the fault layer and producing a minimal reproduction. Use when the user reports an API request failing, pastes an HTTP error response or status code, or asks why a request works in one client but not another. Do not use for designing new APIs or for performance tuning of requests that already succeed.

日本語の概要は準備中です。原文の説明を表示しています。