本文へ移動
cccskills
無料GitHub で公開

bio-copy-number-subclonal-copy-number

Resolve subclonal copy number, whole-genome doubling, and copy-number tumor evolution from bulk sequencing with Battenberg, TITAN, and MEDICC2. Covers clonal versus subclonal copy-number states, haplotype phasing for subclonal resolution, cancer cell fraction, whole-genome-doubling detection and timing relative to mutations, mirrored subclonal allelic imbalance, and copy-number phylogenies. Use when a tumor is heterogeneous and bulk data shows non-integer copy number, when calling subclonal CNAs, detecting or timing whole-genome doubling, reconstructing copy-number evolution, or deciding between Battenberg and TITAN.

インストール方法を見る

含まれるファイル(3)

  • SKILL.md13.8 KB
  • examples/run_titan.R3.8 KB
  • usage-guide.md4.1 KB

SKILL.md(原文)

インストールする前に、エージェントに与えられる指示の中身を確認できます。

Version Compatibility

Reference examples tested with: R 4.3+ with Battenberg 2.2.10+ and TitanCNA 1.40+, MEDICC2 1.0+, Python 3.10+; impute2/Beagle phasing reference panels.

Before using code patterns, verify installed versions match. If versions differ:

  • R: packageVersion('Battenberg') / 'TitanCNA') then ?function
  • CLI: medicc2 --help
  • Battenberg is GitHub-only (Wedge-lab/battenberg) and needs a 1000 Genomes impute/phasing reference and allele-counter; confirm reference data is installed

Battenberg and TITAN both consume allele-specific data (logR + BAF at heterozygous SNPs); they cannot run on relative copy ratio alone.

Subclonal Copy Number and Tumor Evolution

"This copy number is non-integer — is it noise, or are there subclones" -> A tumor is a mixture of cell populations. When a copy-number change is present in only some cancer cells, bulk sequencing averages it into a non-integer state. A long non-integer segment is not noise — it is a subclonal copy-number alteration, and resolving it reveals the tumor's clonal architecture.

  • R: Battenberg (phased clonal + subclonal CN), TitanCNA (HMM mixture of cell populations)
  • CLI: medicc2 (whole-genome-doubling-aware copy-number phylogenies)
  • Input: allele-specific data — see allele-specific-copy-number for the clonal layer

Clonal vs Subclonal — What the Tools Output

ConceptMeaning
Clonal CNAPresent in all cancer cells; one copy-number state per segment
Subclonal CNAPresent in a fraction of cancer cells; the segment needs two states plus a fraction
Cancer cell fraction (CCF)Fraction of cancer cells carrying the event
Mirrored subclonal allelic imbalanceDifferent subclones lose opposite haplotypes of the same region

Battenberg fits a clonal allele-specific profile (ASCAT internally), then where a segment fits poorly as a single integer state, it models it as a mixture of two states with a subclonal fraction. TITAN uses an HMM whose states span multiple clonal clusters, jointly estimating per-cluster cellular prevalence. Both need haplotype phasing — subclonal allelic imbalance is only resolvable when SNPs are phased.

Tool Selection

ToolModelBest forFails when
BattenbergPhased clonal fit + per-segment subclonal mixtureWGS, subclonal CN to ~3% of cells, clonal-evolution studiesLow depth/purity; heavy compute; needs phasing reference
TITANHMM mixture across clonal clustersWGS/WES, joint CN+LOH+subclonal prevalence, few clustersMany subclones; cluster number must be chosen and swept
MEDICC2WGD-aware minimum-event copy-number phylogenyMulti-sample / multi-region evolutionSingle sample (no tree to build)
ASCAT/FACETSClonal allele-specific onlyWhen subclonal resolution is not neededTreats subclonal segments as noisy clonal — see allele-specific-copy-number

Whole-Genome Doubling — Detection and Timing

Whole-genome doubling (WGD) is a discrete, common (~30% of advanced cancers) evolutionary event, and it must be called explicitly because it changes how every copy number is read.

  • Detection: A tumor has undergone WGD if more than ~50% of the autosomal genome has a major (more frequent) allele copy number >= 2. WGD tumors have median ploidy ~3.3 versus ~2.1 for non-WGD.
  • Relative vs absolute: Depth gives relative copy number; WGD calling needs absolute allele-specific copy number (BAF anchors ploidy). A depth-only profile cannot distinguish a WGD genome from a non-WGD genome — this is the identifiability problem of allele-specific-copy-number in another guise.
  • Timing: WGD is timeable relative to point mutations. Mutations that arose before WGD are carried at multiple copies (mutation copy number ~2); mutations after WGD sit at one copy. This dates WGD within the tumor's mutational history.

Calling Subclonal CN with Battenberg

Goal: Fit clonal and subclonal allele-specific copy number genome-wide.

Approach: Generate phased allele counts against a 1000 Genomes reference, run the Battenberg pipeline; segments that fit poorly as one integer state are split into a two-state subclonal mixture with a cellular fraction.

library(Battenberg)

# Battenberg orchestrates allele counting, phasing, ASCAT clonal fit, and the
# subclonal mixture step. Reference data (1000G impute panel) must be installed.
battenberg(
    samplename          = 'tumour_id',
    normalname          = 'normal_id',
    sample_data_file    = 'tumour.bam',
    normal_data_file    = 'normal.bam',
    ismale              = TRUE,
    imputeinfofile      = 'impute_info.txt',
    g1000prefix         = '1000G_loci/1000genomesloci2012_chr',     # SNP loci data
    g1000allelesprefix  = '1000G_alleles/1000genomesAlleles2012_chr', # SNP alleles (WGS)
    problemloci         = 'probloci.txt',
    gccorrectprefix     = 'GC_correction_hg38_chr',
    repliccorrectprefix = 'RT_correction_hg38_chr',
    genomebuild         = 'hg38',                                   # default is hg19
    nthreads            = 8)
# Output *_subclones.txt: per segment, nMaj1/nMin1 (state 1) + frac1, and nMaj2/nMin2 +
# frac2 when the segment is subclonal (two states).

Calling Subclonal CN with TITAN

Goal: Jointly infer copy number, LOH, and the cellular prevalence of clonal clusters.

Approach: TITAN needs both allele counts (het SNPs) and corrected read depth. Load the allele counts; correct tumour/normal read depth for GC and mappability bias; overlay the resulting logR onto the het positions and log-transform; filter; then run the EM and sweep the cluster number — model selection picks the best.

library(TitanCNA)

# Allele counts at het SNPs.
data <- loadAlleleCounts('tumour.allelicCounts.tsv', genomeStyle = 'UCSC')

# Read-depth correction is mandatory: correctReadDepth needs tumour + normal coverage
# WIGs and GC + mappability WIGs. genomeStyle MUST match loadAlleleCounts above
# (default 'NCBI' vs 'UCSC') or getPositionOverlap matches no chromosomes and logR is NA.
cnData <- correctReadDepth('tumour.wig', 'normal.wig', 'gc.wig', 'map.wig',
                           genomeStyle = 'UCSC')
data$logR <- log(2 ^ getPositionOverlap(data$chr, data$posn, cnData))
data <- filterData(data, 1:24, minDepth = 10, maxDepth = 200, map = NULL)

params <- loadDefaultParameters(copyNumber = 8, numberClonalClusters = 2,
                                symmetric = TRUE, data = data)
conv <- runEMclonalCN(data, params, maxiter = 20, txnExpLen = 1e15)
results <- viterbiClonalCN(data, conv)
# Sweep numberClonalClusters (1..5) and compare model fit; the S_Dbw validity index
# or the model log-likelihood selects the cluster number.

Failure Modes

Subclonal call from insufficient depth or purity

Trigger: Calling subclonal CN on shallow WGS or a low-purity tumor.

Mechanism: A subclonal segment's signal is the clonal deviation scaled by the subclone's cell fraction — already small, and below the noise floor at low depth/purity.

Symptom: Many "subclonal" segments with implausibly low fractions; calls not reproducible across reruns or regions.

Fix: Battenberg's ~3%-of-cells sensitivity assumes adequate WGS depth and purity. For low-depth or low-purity samples, treat only clonal CN as reliable and report subclonal calls as exploratory.

Mirrored subclonal allelic imbalance misread

Trigger: A region where different subclones lost opposite haplotypes.

Mechanism: Bulk BAF averages the two opposite losses toward 0.5, so the region can look balanced (clonal, no LOH) when it is in fact subclonally rearranged on both haplotypes.

Symptom: A segment called clonal-balanced that conflicts with multi-region or single-cell data; BAF near 0.5 with an odd logR.

Fix: Phasing (Battenberg) is required to detect mirrored subclonal allelic imbalance. Multi-region or single-cell data resolves it definitively; a single bulk sample can miss it.

WGD not called — every copy number off by a factor

Trigger: Interpreting copy number without first establishing WGD status.

Mechanism: The likelihood surface has near-equal modes at ploidy P and 2P; missing a WGD halves all copy numbers and mis-times every mutation.

Symptom: Copy numbers and mutation copy numbers inconsistent; "subclonal" gains that are actually clonal post-WGD states.

Fix: Call WGD explicitly (>50% of autosomes at major CN >= 2) from absolute allele-specific copy number. Cross-check ploidy against the odd/even CN fraction and clonal-SNV multiplicity before any subclonal interpretation.

Over-interpreting one subclonal segment as a subclone

Trigger: Declaring a distinct tumor subclone from a single subclonal copy-number segment.

Mechanism: A single segment at an intermediate fraction can arise from segmentation error, a mis-fit clonal state, or genuine subclonality — one segment cannot distinguish these.

Symptom: A "subclone" supported by exactly one segment; clonal architecture claims that do not replicate.

Fix: Require multiple concordant subclonal segments at a consistent cell fraction, ideally corroborated by SNV-based subclonal reconstruction (cancer cell fraction clustering) and multi-region sampling.

Single-region sampling misses spatial subclones

Trigger: Inferring clonal architecture from one biopsy of a spatially heterogeneous tumor.

Mechanism: A subclone confined to an unsampled region is invisible; a single region cannot capture branching evolution.

Symptom: Apparently simple clonal architecture contradicted by a second biopsy.

Fix: For evolution and architecture claims, use multi-region sampling and a phylogeny method (MEDICC2 for copy-number trees). Single-region subclonal calls describe that region only.

Reconciliation

PatternLikely causeAction
Battenberg subclonal vs TITAN clonalDifferent mixture models; cluster numberSweep TITAN clusters; compare cell fractions
WGD called by one tool, not anotherInteger-multiple ploidy ambiguityCheck odd/even CN fraction and SNV multiplicity
Many low-fraction subclonal segmentsDepth/purity too lowTrust only clonal CN; flag subclonal as exploratory
Subclonal CN vs SNV-based CCF disagreeCN and SNV subclones need not coincideIntegrate both; they answer different questions

Operational rule: Report subclonal copy number as confident only when (1) depth and purity support it, (2) WGD status is established from absolute allele-specific CN, (3) multiple concordant segments support a subclone at a consistent fraction, and (4) for evolution claims, multi-region data and a copy-number phylogeny are used. A single subclonal segment is a hypothesis, not a subclone.

Quantitative Thresholds

ThresholdValueSource / Rationale
Battenberg subclonal sensitivity~3% of cellsNik-Zainal 2012; requires adequate WGS depth/purity
WGD definition> 50% of autosomes at major CN >= 2Bielski 2018; the operational WGD call
WGD median ploidy~3.3 (WGD) vs ~2.1 (non-WGD)Bielski 2018 pan-cancer
Pre-WGD mutation copy number>= ~1.75Pre-doubling mutations carried at multiple copies
TITAN clonal clusterssweep 1-5, select by fitFew clusters resolvable from one bulk sample

Common Errors

Error / symptomCauseSolution
Battenberg install/run failsGitHub-only; missing 1000G referenceInstall from GitHub; set up the impute reference
Non-integer segments treated as noiseSubclonal CNA not modeledUse Battenberg/TITAN, not a clonal-only caller
All copy numbers half/double expectedWGD not calledEstablish WGD from absolute CN; check SNV multiplicity
Subclones not reproducibleLow depth/purity, single segmentRequire depth, concordant segments, multi-region
Balanced region conflicts with other dataMirrored subclonal allelic imbalanceUse phased (Battenberg) or single-cell data
TITAN cluster number arbitraryCluster count not sweptSweep 1-5; select by model fit

References

  • Nik-Zainal S et al 2012. The life history of 21 breast cancers (Battenberg). Cell 149:994
  • Ha G et al 2014. TITAN: inference of copy number architectures in clonal cell populations from tumor whole-genome sequence data. Genome Res 24:1881
  • Bielski CM et al 2018. Genome doubling shapes the evolution and prognosis of advanced cancers. Nat Genet 50:1189
  • Dewhurst SM et al 2014. Tolerance of whole-genome doubling propagates chromosomal instability. Cancer Discov 4:175
  • Kaufmann TL et al 2022. MEDICC2: whole-genome doubling aware copy-number phylogenies for cancer evolution. Genome Biol 23:241

Related Skills

  • copy-number/allele-specific-copy-number - Clonal allele-specific CN, purity, ploidy
  • copy-number/copy-ratio-segmentation - Segmentation feeding subclonal callers
  • copy-number/hrd-scoring - Whole-genome-doubling correction for LST
  • copy-number/recurrent-cnv - Copy-number signatures including WGD and chromothripsis
  • copy-number/cnv-visualization - Visualizing subclonal segments and BAF
  • variant-calling/vcf-basics - SNV calls for cancer cell fraction and WGD timing

レビュー

まだレビューはありません。使ってみた感想をお寄せください。

同じリポジトリのスキル

概要と使いどころ

Testing patterns for PHPUnit and Playwright E2E tests. Use when writing tests, debugging test failures, setting up test coverage, or implementing test patterns for ActivityPub features.

日本語の概要は準備中です。原文の説明を表示しています。

lilinji/GeneTind-Life-Skills142026年8月21日 更新

adaptyv

無料

How to use the Adaptyv Bio Foundry API and Python SDK for protein experiment design, submission, and results retrieval. Use this skill whenever the user mentions Adaptyv, Foundry API, protein binding assays, protein screening experiments, BLI/SPR assays, thermostability assays, or wants to submit protein sequences for experimental characterization. Also trigger when code imports `adaptyv`, `adaptyv_sdk`, or `FoundryClient`, or references `foundry-api-public.adaptyvbio.com`.

日本語の概要は準備中です。原文の説明を表示しています。

lilinji/GeneTind-Life-Skills142026年8月21日 更新

Add unsigned integer (uint) type support to PyTorch operators by updating AT_DISPATCH macros. Use when adding support for uint16, uint32, uint64 types to operators, kernels, or when user mentions enabling unsigned types, barebones unsigned types, or uint support.

日本語の概要は準備中です。原文の説明を表示しています。

lilinji/GeneTind-Life-Skills142026年8月21日 更新

Time-blind friendly planning, executive function support, and daily structure for ADHD brains. Specializes in realistic time estimation, dopamine-aware task design, and building systems that actually work for neurodivergent minds.

日本語の概要は準備中です。原文の説明を表示しています。

lilinji/GeneTind-Life-Skills142026年8月21日 更新

aeon

無料

This skill should be used for time series machine learning tasks including classification, regression, clustering, forecasting, anomaly detection, segmentation, and similarity search. Use when working with temporal data, sequential patterns, or time-indexed observations requiring specialized algorithms beyond standard ML approaches. Particularly suited for univariate and multivariate time series analysis with scikit-learn compatible APIs.

日本語の概要は準備中です。原文の説明を表示しています。

lilinji/GeneTind-Life-Skills142026年8月21日 更新

Unified analysis pipeline for affinity-based proteomics platforms — Olink (PEA, NPX) and SomaLogic SomaScan (SOMAmer, RFU). Platform-aware QC, normalisation, differential abundance, volcano plots, heatmaps, and PCA.

日本語の概要は準備中です。原文の説明を表示しています。

lilinji/GeneTind-Life-Skills142026年8月21日 更新

lilinji のスキルをすべて見る

このスキルの問題を報告する