生成图文并茂的分析报告/实验报告/质检报告(固定模版)。当用户要求"生成报告/总结报告/实验报告/质检报告/QC报告",或分析流程收尾需要交付报告时使用。报告必须基于真实分析输出,包含固定章节结构、关键指标表格和真实结果图。
日本語の概要は準備中です。原文の説明を表示しています。
Resolve subclonal copy number, whole-genome doubling, and copy-number tumor evolution from bulk sequencing with Battenberg, TITAN, and MEDICC2. Covers clonal versus subclonal copy-number states, haplotype phasing for subclonal resolution, cancer cell fraction, whole-genome-doubling detection and timing relative to mutations, mirrored subclonal allelic imbalance, and copy-number phylogenies. Use when a tumor is heterogeneous and bulk data shows non-integer copy number, when calling subclonal CNAs, detecting or timing whole-genome doubling, reconstructing copy-number evolution, or deciding between Battenberg and TITAN.
インストールする前に、エージェントに与えられる指示の中身を確認できます。
Reference examples tested with: R 4.3+ with Battenberg 2.2.10+ and TitanCNA 1.40+, MEDICC2 1.0+, Python 3.10+; impute2/Beagle phasing reference panels.
Before using code patterns, verify installed versions match. If versions differ:
packageVersion('Battenberg') / 'TitanCNA') then ?functionmedicc2 --helpWedge-lab/battenberg) and needs a 1000 Genomes impute/phasing reference and allele-counter; confirm reference data is installedBattenberg and TITAN both consume allele-specific data (logR + BAF at heterozygous SNPs); they cannot run on relative copy ratio alone.
"This copy number is non-integer — is it noise, or are there subclones" -> A tumor is a mixture of cell populations. When a copy-number change is present in only some cancer cells, bulk sequencing averages it into a non-integer state. A long non-integer segment is not noise — it is a subclonal copy-number alteration, and resolving it reveals the tumor's clonal architecture.
Battenberg (phased clonal + subclonal CN), TitanCNA (HMM mixture of cell populations)medicc2 (whole-genome-doubling-aware copy-number phylogenies)| Concept | Meaning |
|---|---|
| Clonal CNA | Present in all cancer cells; one copy-number state per segment |
| Subclonal CNA | Present in a fraction of cancer cells; the segment needs two states plus a fraction |
| Cancer cell fraction (CCF) | Fraction of cancer cells carrying the event |
| Mirrored subclonal allelic imbalance | Different subclones lose opposite haplotypes of the same region |
Battenberg fits a clonal allele-specific profile (ASCAT internally), then where a segment fits poorly as a single integer state, it models it as a mixture of two states with a subclonal fraction. TITAN uses an HMM whose states span multiple clonal clusters, jointly estimating per-cluster cellular prevalence. Both need haplotype phasing — subclonal allelic imbalance is only resolvable when SNPs are phased.
| Tool | Model | Best for | Fails when |
|---|---|---|---|
| Battenberg | Phased clonal fit + per-segment subclonal mixture | WGS, subclonal CN to ~3% of cells, clonal-evolution studies | Low depth/purity; heavy compute; needs phasing reference |
| TITAN | HMM mixture across clonal clusters | WGS/WES, joint CN+LOH+subclonal prevalence, few clusters | Many subclones; cluster number must be chosen and swept |
| MEDICC2 | WGD-aware minimum-event copy-number phylogeny | Multi-sample / multi-region evolution | Single sample (no tree to build) |
| ASCAT/FACETS | Clonal allele-specific only | When subclonal resolution is not needed | Treats subclonal segments as noisy clonal — see allele-specific-copy-number |
Whole-genome doubling (WGD) is a discrete, common (~30% of advanced cancers) evolutionary event, and it must be called explicitly because it changes how every copy number is read.
Goal: Fit clonal and subclonal allele-specific copy number genome-wide.
Approach: Generate phased allele counts against a 1000 Genomes reference, run the Battenberg pipeline; segments that fit poorly as one integer state are split into a two-state subclonal mixture with a cellular fraction.
library(Battenberg)
# Battenberg orchestrates allele counting, phasing, ASCAT clonal fit, and the
# subclonal mixture step. Reference data (1000G impute panel) must be installed.
battenberg(
samplename = 'tumour_id',
normalname = 'normal_id',
sample_data_file = 'tumour.bam',
normal_data_file = 'normal.bam',
ismale = TRUE,
imputeinfofile = 'impute_info.txt',
g1000prefix = '1000G_loci/1000genomesloci2012_chr', # SNP loci data
g1000allelesprefix = '1000G_alleles/1000genomesAlleles2012_chr', # SNP alleles (WGS)
problemloci = 'probloci.txt',
gccorrectprefix = 'GC_correction_hg38_chr',
repliccorrectprefix = 'RT_correction_hg38_chr',
genomebuild = 'hg38', # default is hg19
nthreads = 8)
# Output *_subclones.txt: per segment, nMaj1/nMin1 (state 1) + frac1, and nMaj2/nMin2 +
# frac2 when the segment is subclonal (two states).
Goal: Jointly infer copy number, LOH, and the cellular prevalence of clonal clusters.
Approach: TITAN needs both allele counts (het SNPs) and corrected read depth. Load the allele counts; correct tumour/normal read depth for GC and mappability bias; overlay the resulting logR onto the het positions and log-transform; filter; then run the EM and sweep the cluster number — model selection picks the best.
library(TitanCNA)
# Allele counts at het SNPs.
data <- loadAlleleCounts('tumour.allelicCounts.tsv', genomeStyle = 'UCSC')
# Read-depth correction is mandatory: correctReadDepth needs tumour + normal coverage
# WIGs and GC + mappability WIGs. genomeStyle MUST match loadAlleleCounts above
# (default 'NCBI' vs 'UCSC') or getPositionOverlap matches no chromosomes and logR is NA.
cnData <- correctReadDepth('tumour.wig', 'normal.wig', 'gc.wig', 'map.wig',
genomeStyle = 'UCSC')
data$logR <- log(2 ^ getPositionOverlap(data$chr, data$posn, cnData))
data <- filterData(data, 1:24, minDepth = 10, maxDepth = 200, map = NULL)
params <- loadDefaultParameters(copyNumber = 8, numberClonalClusters = 2,
symmetric = TRUE, data = data)
conv <- runEMclonalCN(data, params, maxiter = 20, txnExpLen = 1e15)
results <- viterbiClonalCN(data, conv)
# Sweep numberClonalClusters (1..5) and compare model fit; the S_Dbw validity index
# or the model log-likelihood selects the cluster number.
Trigger: Calling subclonal CN on shallow WGS or a low-purity tumor.
Mechanism: A subclonal segment's signal is the clonal deviation scaled by the subclone's cell fraction — already small, and below the noise floor at low depth/purity.
Symptom: Many "subclonal" segments with implausibly low fractions; calls not reproducible across reruns or regions.
Fix: Battenberg's ~3%-of-cells sensitivity assumes adequate WGS depth and purity. For low-depth or low-purity samples, treat only clonal CN as reliable and report subclonal calls as exploratory.
Trigger: A region where different subclones lost opposite haplotypes.
Mechanism: Bulk BAF averages the two opposite losses toward 0.5, so the region can look balanced (clonal, no LOH) when it is in fact subclonally rearranged on both haplotypes.
Symptom: A segment called clonal-balanced that conflicts with multi-region or single-cell data; BAF near 0.5 with an odd logR.
Fix: Phasing (Battenberg) is required to detect mirrored subclonal allelic imbalance. Multi-region or single-cell data resolves it definitively; a single bulk sample can miss it.
Trigger: Interpreting copy number without first establishing WGD status.
Mechanism: The likelihood surface has near-equal modes at ploidy P and 2P; missing a WGD halves all copy numbers and mis-times every mutation.
Symptom: Copy numbers and mutation copy numbers inconsistent; "subclonal" gains that are actually clonal post-WGD states.
Fix: Call WGD explicitly (>50% of autosomes at major CN >= 2) from absolute allele-specific copy number. Cross-check ploidy against the odd/even CN fraction and clonal-SNV multiplicity before any subclonal interpretation.
Trigger: Declaring a distinct tumor subclone from a single subclonal copy-number segment.
Mechanism: A single segment at an intermediate fraction can arise from segmentation error, a mis-fit clonal state, or genuine subclonality — one segment cannot distinguish these.
Symptom: A "subclone" supported by exactly one segment; clonal architecture claims that do not replicate.
Fix: Require multiple concordant subclonal segments at a consistent cell fraction, ideally corroborated by SNV-based subclonal reconstruction (cancer cell fraction clustering) and multi-region sampling.
Trigger: Inferring clonal architecture from one biopsy of a spatially heterogeneous tumor.
Mechanism: A subclone confined to an unsampled region is invisible; a single region cannot capture branching evolution.
Symptom: Apparently simple clonal architecture contradicted by a second biopsy.
Fix: For evolution and architecture claims, use multi-region sampling and a phylogeny method (MEDICC2 for copy-number trees). Single-region subclonal calls describe that region only.
| Pattern | Likely cause | Action |
|---|---|---|
| Battenberg subclonal vs TITAN clonal | Different mixture models; cluster number | Sweep TITAN clusters; compare cell fractions |
| WGD called by one tool, not another | Integer-multiple ploidy ambiguity | Check odd/even CN fraction and SNV multiplicity |
| Many low-fraction subclonal segments | Depth/purity too low | Trust only clonal CN; flag subclonal as exploratory |
| Subclonal CN vs SNV-based CCF disagree | CN and SNV subclones need not coincide | Integrate both; they answer different questions |
Operational rule: Report subclonal copy number as confident only when (1) depth and purity support it, (2) WGD status is established from absolute allele-specific CN, (3) multiple concordant segments support a subclone at a consistent fraction, and (4) for evolution claims, multi-region data and a copy-number phylogeny are used. A single subclonal segment is a hypothesis, not a subclone.
| Threshold | Value | Source / Rationale |
|---|---|---|
| Battenberg subclonal sensitivity | ~3% of cells | Nik-Zainal 2012; requires adequate WGS depth/purity |
| WGD definition | > 50% of autosomes at major CN >= 2 | Bielski 2018; the operational WGD call |
| WGD median ploidy | ~3.3 (WGD) vs ~2.1 (non-WGD) | Bielski 2018 pan-cancer |
| Pre-WGD mutation copy number | >= ~1.75 | Pre-doubling mutations carried at multiple copies |
| TITAN clonal clusters | sweep 1-5, select by fit | Few clusters resolvable from one bulk sample |
| Error / symptom | Cause | Solution |
|---|---|---|
| Battenberg install/run fails | GitHub-only; missing 1000G reference | Install from GitHub; set up the impute reference |
| Non-integer segments treated as noise | Subclonal CNA not modeled | Use Battenberg/TITAN, not a clonal-only caller |
| All copy numbers half/double expected | WGD not called | Establish WGD from absolute CN; check SNV multiplicity |
| Subclones not reproducible | Low depth/purity, single segment | Require depth, concordant segments, multi-region |
| Balanced region conflicts with other data | Mirrored subclonal allelic imbalance | Use phased (Battenberg) or single-cell data |
| TITAN cluster number arbitrary | Cluster count not swept | Sweep 1-5; select by model fit |
まだレビューはありません。使ってみた感想をお寄せください。
概要と使いどころ
生成图文并茂的分析报告/实验报告/质检报告(固定模版)。当用户要求"生成报告/总结报告/实验报告/质检报告/QC报告",或分析流程收尾需要交付报告时使用。报告必须基于真实分析输出,包含固定章节结构、关键指标表格和真实结果图。
日本語の概要は準備中です。原文の説明を表示しています。
Predicts ADMET properties using ADMETlab 3.0 (119 endpoints with uncertainty), ADMET-AI, DeepChem MolNet, and chemprop D-MPNN with explicit handling of OECD QSAR principles, applicability domain assessment, calibration, hERG/CYP/AMES gold-standard endpoints, and PAINS / Lipinski / Ro5 / Veber / BBB druglikeness filters. Use when filtering compounds for drug-likeness, prioritizing leads by predicted safety, or building an in-house ADMET QSAR model.
日本語の概要は準備中です。原文の説明を表示しています。
Trim PCR primers from aligned reads in amplicon-panel BAMs using samtools ampliconclip. Use when processing SARS-CoV-2 ARTIC, hereditary cancer panels, ctDNA hot-spot panels, or any amplicon assay where primer-derived bases would falsely confirm reference at primer footprints.
日本語の概要は準備中です。原文の説明を表示しています。
Filter alignments by flags, mapping quality, and regions using samtools view and pysam. Use when extracting specific reads, removing low-quality alignments, or subsetting to target regions.
日本語の概要は準備中です。原文の説明を表示しています。
Create and use BAI/CSI indices for BAM/CRAM files using samtools and pysam. Use when enabling random access to alignment files or fetching specific genomic regions.
日本語の概要は準備中です。原文の説明を表示しています。
Read, write, and convert multiple sequence alignment files using Biopython Bio.AlignIO. Supports Clustal, PHYLIP, Stockholm, FASTA, Nexus, and other alignment formats for phylogenetics and conservation analysis. Use when reading, writing, or converting alignment file formats.
日本語の概要は準備中です。原文の説明を表示しています。