gz mx

Overview

The MX Maintenance Hangar lets the operator repair governance surfaces that the guards themselves protect. While the hangar is open, most governance guards drop to advisory so repair work can proceed without the checked-in surfaces blocking the repair itself. Two guards NEVER drop: gate5_invariants and the PRIME DIRECTIVE (ownership — "fix what you know AND what you find").

The same marker carries a second mode. Safe mode is the toggle (GHI #1244): OBPI initiation and brief ceremony are suspended under a written contract, every guard outside the floor drops to advisory as in the hangar, and the banner names the contract each turn. Gate 5, the ledger through gz verbs, operator PII and the PRIME DIRECTIVE bind in both modes.

The operator operates this skill; the skill invokes gz mx; nobody shells out to gz mx enter or gz mx exit directly. The operator never types the verb: entry and exit are the skill's steps below, and an instruction that hands the operator a raw gz mx command is a defect in the surface that gave it.

When to Use

• Entering the hangar — governance repair session needs to begin; guards need to go advisory so you can fix the surfaces they protect
• Checking hangar status — confirming whether the hangar is currently open mid-session
• Clean exit — repair is complete; re-enforce all guards at full strength
• Entering safe mode — the operator has written a contract that says what the mode suspends, what still binds, what each act records and how the mode exits
• Exiting safe mode — the contract's exit legs are met; the skill reads them before the hard gate runs

Workflow

1. Open the hangar

   uv run gz mx enter --reason "<why>" --attestor g0 [--scope ADR-X.Y.Z ...]
   

   Creates .gzkit/mx.json marker. Most governance guards drop to advisory. --reason and --attestor are required; the attestor is the operator, never an agent.

2. Perform the repair Work on the governance surfaces that needed fixing. Gate 5 invariants and the PRIME DIRECTIVE still bind — guards drop to advisory so you can repair governance itself, not so defects can be deferred.

3. Close the hangar

   uv run gz mx exit --attestor g0
   

   Removes .gzkit/mx.json marker. Every guard re-runs at full strength; exit is a hard gate (all guards must pass before exit succeeds).

Workflow — safe mode (GHI #1244)

1. Confirm the contract before anything is written. The operator names the contract document, written from .gzkit/templates/safe_mode_contract.md under docs/governance/safe-mode-doctrine.md (first instance: docs/governance/harbor-pilotage-candidate-2026-10-15.md). The skill reads it and confirms it carries § Authority (whose word opened the mode), § Purpose, § The general arrangement (the target structure, drawn), § What is suspended and what is not, § Mandate, § Records (one commit per act with its trailer and its gz arb red --commit witness), § Repair orders (the register, each naming the band it serves) and § Exit (structural conditions, each with a witness). A contract missing any of these is reported and the mode is not entered.

2. Enter safe mode

   uv run gz mx enter --mode safe --contract <contract path> --reason "<why>" --attestor g0
   

   Same marker, mode: safe, bound to its mx_session_opened event. The verb refuses a missing or outside contract and refuses a contract under --mode mx. From this turn the banner names the contract; guards outside the floor are advisory until the exit.

3. Work the repair orders under the contract. Each act is one commit with its Task: trailer naming its repair order, its commit-grain witness, and a passage-log row with the measurement before and after. The ledger is written only through gz verbs; no control is removed.

4. Read the exit before leaving. The skill reads the contract's § Exit conditions and § Repair orders (the orientation's drydock block once GHI #1245 lands; until then each witness re-run) and names any condition not met or order still open. One unmet condition stops here: the exit is not attempted, and the operator decides whether it is waived by a recorded ruling or worked.

5. Exit through the hard gate

   uv run gz mx exit --attestor g0
   

   The marker is removed, every guard re-runs at full strength, the enter-to-exit log is rendered for the operator, and mx_session_closed is written. A red guard restores the marker and refuses.

6. Hand back. The contract's handback amendment (every pilot commit listed, kept or reverted, the passage log carried, the suspended rules restored) is drafted by the session and ratified by the operator. Civil rule resumes on that ratification, not on the exit.

Example

# Enter the hangar to repair a drifted OBPI brief
uv run gz mx enter --reason "repair a drifted OBPI brief" --attestor g0

# Perform repair work (briefs, rules, docs)
# ...

# Exit — guards re-enforce; exit fails if any guard is still red
uv run gz mx exit --attestor g0

Safe mode, as the skill runs it for the operator:

# Step 2 — enter under the pilotage contract
uv run gz mx enter --mode safe --contract docs/governance/harbor-pilotage-candidate-2026-10-15.md --reason "harbor pilotage" --attestor g0

# Steps 3 and 4 — repair orders under § Records; § Exit read before leaving

# Step 5 — exit through the hard gate
uv run gz mx exit --attestor g0

Repairing a ledger row

The ledger is the one governance surface hangar mode can never make writable: AGENTS.md § Behavior Rules forbids hand-writing it, and that prohibition is what makes it trustworthy. A row recorded in error is therefore repaired forward, and the repair is available inside or outside the hangar.

gz ledger correct appends one corrective action naming the prior row by its (event, id, ts) triple — the ledger has no per-row id, because id carries the artifact rather than the event. gz ledger corrections is the census of what is currently in force.

# Review the exact target first; nothing is written
uv run gz ledger correct \
  --subject-event pipeline_launched \
  --subject-id OBPI-0.35.0-08-remember-post-append-advisory \
  --subject-ts 2026-08-23T13:12:21.832251+00:00 \
  --disposition void --cause agent-error \
  --reason "pipeline launched without operator initiation" \
  --attestor g0 --dry-run

# What is corrected right now
uv run gz ledger corrections

Three dispositions: void (the row records something that was not true — no reader may count it), discharged (the row was true and its condition has since been resolved — it leaves the liveness reading but stays evidence), and reinstated (undo a prior correction). Operator-gated: --attestor and --reason fail closed when empty, on the same terms as gz obpi repudiate.

Constraints

• Operator operates the skill; the skill invokes gz mx; nobody shells out, and no surface hands the operator a raw gz mx command
• Safe mode is entered only under a contract that carries § Authority, § Purpose, § The general arrangement, § What is suspended, § Mandate, § Records, § Repair orders and § Exit; exit is attempted only after § Exit and the register are read
• gate5_invariants and the PRIME DIRECTIVE bind throughout the session
• Exit is a hard gate — do not attempt exit until all detectable defects are fixed
• See .gzkit/rules/mx-mode.md for the binding agent rule for hangar sessions