“usb”的搜索结果

Run a spec-driven agent loop where coding tasks live as markdown specs that move through inbox → active → archive, get implemented by Claude Code or Codex, and pass a review gate before they count as done. Use when the user mentions "loop factory", a "spec-driven loop", an "agent factory", wants repeatable/reviewable agent work, or when a repo has a factory/specs/inbox or factory/specs/active directory. Also covers installing and scaffolding the loop-factory CLI into a project.

中文简介正在准备中。当前显示原文说明。

Adversarial senior-engineer review for agent-generated plans, designs, and architectures. Treats the current output as junior work, constructs a senior reviewer whose domain expertise comes from live codebase research plus web research of current best practices, diagnoses altitude failures (too vague or too granular), then rewrites the plan into a scoped, state-of-the-art version. Use when the user says "junior to senior", "senior review", "review this like a staff engineer", when a plan feels hand-wavy or lost in details, or before committing to any agent-written plan.

中文简介正在准备中。当前显示原文说明。

Finds and finishes the last 20% of a built solution — the experiential layer agents skip: what the output actually reads like, which pages or screens should exist, first-run and empty states, opinionated defaults, the golden path. Use when planning any build so the magic gets specced as concretely as the plumbing, before calling any build "done", when a solution works but feels like a demo, or when the user says "last 20%", "finish this", "make it actually good", "is this actually done", or "why does this feel flat".

中文简介正在准备中。当前显示原文说明。

Ultra-compressed communication mode. Cuts token usage ~75% by speaking like caveman while keeping full technical accuracy. Supports intensity levels: lite, full (default), ultra, wenyan-lite, wenyan-full, wenyan-ultra. Use when user says "caveman mode", "talk like caveman", "use caveman", "less tokens", "be brief", or invokes /caveman. Also auto-triggers when token efficiency is requested.

中文简介正在准备中。当前显示原文说明。

Install a per-turn canary signal (e.g. starting every reply with the user's name and a turn counter) so silent context degradation becomes visible the moment it happens, and run a recovery protocol when the canary trips. Use when the user mentions a "canary", "context canary", or "canary check", asks to detect context rot / compaction / drift, says "you stopped using my name" or "did you lose context", asks "how degraded is your context", or wants an early-warning system for long agent sessions.

中文简介正在准备中。当前显示原文说明。

CLI-first serial port debugging and macro automation with serial-mcp-server for Codex and Claude Code. Use when working with UART or USB-serial devices, listing serial ports, probing STM32/Arduino/ESP32 boards, writing or reading serial data, running JSON serial macros, controlling RTS/DTR, or using serial-mcp-server through MCP tools.

中文简介正在准备中。当前显示原文说明。

Capture frames or clips from RTSP/ONVIF cameras and local webcams, including USB pan/tilt/zoom control.

中文简介正在准备中。当前显示原文说明。

Drive web pages through the caveman-browse MCP tools (browser_snapshot, browser_act, browser_eval, browser_recover). Use whenever interacting with a web page, dashboard, or form through caveman-browse — it teaches the snapshot→act→verify loop, query-first discipline on large pages, and when to recover exact bytes.

中文简介正在准备中。当前显示原文说明。

小红书 / Xiaohongshu / RedNote AI Agent Skill。用 Python Playwright 搜索和读取内容、管理登录会话、发布图文/视频/长文、评论、点赞和收藏；默认输出 JSON，任何写操作都必须先获得用户确认。用户提到 xiaohongshu、小红书、rednote、小红书搜索、发到小红书、小红书笔记分析、小红书运营或小红书自动化时触发。

中文简介正在准备中。当前显示原文说明。

Use when writing a custom bootloader, jumping to application code, relocating VTOR, or implementing DFU/USB firmware update on Cortex-M. Not for reset-to-main: use baremetal-startup.

中文简介正在准备中。当前显示原文说明。

Use when a task needs the judgment of an Animal Caretaker — triaging daily husbandry when kennel census exceeds staffing capacity, reading a Fear-Anxiety-Stress (FAS) score change or appetite/output drop against an escalation threshold, deciding brush-out vs. shave-down on a matted coat, or setting isolation and vaccination-lead-time protocol for a new intake or boarding admission.

中文简介正在准备中。当前显示原文说明。

Firmware development for the WeAct Studio MiniSTM32H7xx core board (STM32H750VBT6) — its 0.96" ST7735 TFT, DVP camera, QSPI/SPI flash, MicroSD, USB, and the STM32Cube HAL + PlatformIO setup around them. Use when working on this board or any STM32H750/H743 WeAct core board: project setup, platformio.ini, clock/PLL configuration, pin mapping, peripheral bring-up, LCD performance, D-cache/DMA problems, DFU flashing, or debugging why something on the board does not work.

中文简介正在准备中。当前显示原文说明。

Разработка прошивок для BE-U1000 (Baikal Electronics / Байкал Электроникс, три ядра RISC-V: BR-350 и BM-310) на отладочных платах EVU-BA-2.1, EVU-BA-2.0 и EVU-BA-1.2 — её eFlash и QSPI flash, UART0/BootROM CLI, PWMA (захват и импульсы), АЦП с DMA, CAN FD, SPI, WDT, CLIC, а также SDK Байкала и его система сборки на make. Use when working on this board or any BE-U1000 / BMCU_U project (SDK 2.1/2.3, riscv32-none-elf, dfu-util, OpenOCD): настройка проекта, Makefile и MEM_REG_ROM, карта выводов и разъёмы XP1/XP8/XP9/XP10, режимы начальной загрузки и страповые выводы, прошивка по UART XMODEM либо USB DFU, работа с eFlash и TCM, прерывания и CLIC, отладка по JTAG — и разбор, почему плата молчит, не стартует, зависает или почему периферия «настроилась», а обмена нет.

中文简介正在准备中。当前显示原文说明。

Firmware development for the 30-pin ESP32-WROOM-32 development board — the DOIT ESP32 DevKit V1 / ESP32 CH340 Type-C / NodeMCU-ESP32 30-pin form factor, 15 pins per side, CH340G or CP2102 USB-UART bridge, AMS1117 LDO, user LED on GPIO2. Use when working on a 30-pin ESP32 devkit (ESP32-D0WDQ6 / ESP32-D0WD-V3, ESP-WROOM-32 module): project setup, platformio.ini and sdkconfig for ESP-IDF or Arduino, pin mapping and which GPIOs are safe, strapping pins, ADC1 vs ADC2 with Wi-Fi, SPI speed and IO_MUX pins, I2C, deep sleep and RTC wake pins, flashing over the CH340 bridge, BOOT/EN recovery, brownouts, or debugging why something on the board does not work.

中文简介正在准备中。当前显示原文说明。

Firmware development for the 36-pin ESP32-WROOM-32 development board — the original DOIT ESP32 DevKit V1 with 18 pins per side, i.e. the 30-pin layout plus the six in-package flash pins (SD0 SD1 SD2 SD3 CMD CLK = GPIO6-11) broken out at the USB end, CH340G or CP2102 bridge, AMS1117 LDO, user LED on GPIO2, GPIO0 not on the header. Use when working on a 36-pin ESP32 devkit (ESP32-D0WDQ6 / ESP32-D0WD-V3, ESP-WROOM-32 module), or when identifying which ESP32 board size you have: project setup, platformio.ini and sdkconfig for ESP-IDF or Arduino, pin mapping and which GPIOs are safe, the flash-pin trap, strapping pins, ADC1 vs ADC2 with Wi-Fi, SPI speed and IO_MUX pins, deep sleep and RTC wake pins, flashing, BOOT/EN recovery, brownouts, or debugging why something on the board does not work.

中文简介正在准备中。当前显示原文说明。

Firmware development for the Waveshare ESP32-C6-LCD-1.47 board (ESP32-C6FH4, QFN32) — its 1.47" 172x320 ST7789 LCD, WS2812 RGB LED, microSD/TF slot, USB-Serial-JTAG console, Wi-Fi 6/BLE/802.15.4 radio, and the ESP-IDF + PlatformIO setup around them. Use when working on this board or the ESP32-C6-LCD-1.47-M variant (SKU 28563 / 30381, WS-28563): project setup, platformio.ini and sdkconfig, pin mapping and strapping pins, LCD or SD bring-up on the shared SPI bus, backlight brightness, display frame rate, flashing over Type-C, or debugging why something on the board does not work.

中文简介正在准备中。当前显示原文说明。

Firmware development for the Waveshare ESP32-C6-Touch-LCD-1.47 board (ESP32-C6FH8, QFN32, 8 MB flash, SKU 31203 / 31201-M) — its 1.47" 172x320 JD9853 IPS panel, AXS5106L capacitive touch controller on I2C 0x63, QMI8658A IMU on I2C 0x6B, microSD/TF slot on the shared SPI2 bus, ETA6098 battery charger with VBAT sensing, USB-Serial-JTAG console, Wi-Fi 6/BLE/802.15.4 radio, and the ESP-IDF + PlatformIO setup around them. Use when working on this board: project setup, platformio.ini and sdkconfig, pin mapping and strapping pins, JD9853 bring-up, touch coordinates and calibration, LVGL memory budgeting, backlight PWM, TF card on the shared bus, battery voltage, flashing over Type-C, or debugging why something on the board does not work. This is NOT the non-touch ESP32-C6-LCD-1.47 (ST7789, 4 MB) — the two share a name and almost no pins.

中文简介正在准备中。当前显示原文说明。

Firmware development for the Guition JC4880P443C_I_W (JC4880P443, JC4880P443C, often mistyped JC4880P433) — a 4.3" 480x800 IPS touch display board on the JC-ESP32P4-M3 module (ESP32-P4NRW32, 32 MB PSRAM, 16 MB flash, ESP32-C6 Wi-Fi co-processor on SDIO) — its ST7701S MIPI-DSI panel, GT911 touch, backlight, ES8311 codec with speaker amp and mic, microSD, RS485, battery charger, 2x13 header, and the PlatformIO + ESP-IDF (pioarduino) setup around them. Use when working on this board: project setup, platformio.ini and sdkconfig.defaults, the P4 silicon revision and an "Illegal instruction" boot, a black DSI screen, ST7701 init sequence and timings, GT911 init errors, backlight PWM, choosing a free GPIO, Wi-Fi through esp_hosted and esp_wifi_remote, SD card, audio, flashing over USB-C, or debugging why something on the board does not work.

中文简介正在准备中。当前显示原文说明。

Firmware development for the Waveshare ESP32-S3-RLCD-4.2 (SKU 33298 / 33507, and the -EN variant) — an ESP32-S3-WROOM-1-N16R8 AIoT board built around a 4.2" fully reflective 300x400 monochrome LCD on a Sitronix ST7305/ST7306, with no backlight, plus an ES8311 speaker codec, an ES7210 dual-microphone ADC, an SHTC3 temperature/humidity sensor, a PCF85063A RTC, a microSD/TF slot on SDMMC, an 18650 holder with battery sensing, BOOT/KEY/PWR buttons and a 2x8 2.54 mm expansion header. Use when working on this board: project setup, platformio.ini, the qio_opi PSRAM memory type, the pin map and which header pins are traps, U8g2 and the ST7305 constructor, a blank or shifted panel, ST7305 low-power mode HPM/LPM, the shared I2C bus and its four slaves, I2S audio directions and the speaker amplifier enable, mounting the TF card, battery voltage, USB CDC console with no UART bridge, flashing over Type-C, deep sleep, or debugging why something on the board does not work.

中文简介正在准备中。当前显示原文说明。

Firmware development for the WeAct Studio RP2350A Core Board (RP2350A — dual Cortex-M33 @ 150 MHz, 520 KB SRAM, 4 MB or 16 MB QSPI flash) in both of its revisions, RP2350A_V10 and RP2350A_V20 — the 40-pin Pico-2-shaped header, 3-or-4-channel 12-bit ADC, PWM, PIO, USB-C CDC, the V1.0 LDO vs V2.0 buck-boost power wiring, and the PlatformIO + arduino-pico (earlephilhower) setup around them. Use when working on this board, a WeAct RP2350 core board of unknown revision, or any Raspberry Pi Pico 2 / RP2350A clone: project setup, platformio.ini, board = rpipico2 vs weact_rp2350b, telling V1.0 and V2.0 apart, pin mapping, LED and KEY pins, powering it from a battery, 4 MB vs 16 MB flash, erratum RP2350-E9 pull-down trouble, BOOT/RESET UF2 flashing, or debugging why something on the board does not work.

中文简介正在准备中。当前显示原文说明。

Use when reviewing active Loop Factory specs against the working tree, checking verification evidence, deciding ACCEPTED or CHANGES_REQUESTED, and archiving accepted specs.

中文简介正在准备中。当前显示原文说明。

Use when orchestrating Loop Factory specs from factory/specs/inbox or factory/specs/active, dispatching work to Codex or Claude agents, generating implementation prompts, or deciding next loop state.

中文简介正在准备中。当前显示原文说明。

Use when orchestrating Loop Factory specs from factory/specs/inbox or factory/specs/active, dispatching work, generating implementation prompts, or deciding next loop state.

中文简介正在准备中。当前显示原文说明。

Use when code changes should be scanned and reflected back into living specs, docs, or architecture notes without changing product intent.

中文简介正在准备中。当前显示原文说明。