12 个 · 按相关度排序
Register a Cognitum Seed device at a supplied endpoint or its default USB Ethernet address. The workflow establishes an agent connection, retrieves device identity, assigns initial trust, optionally pairs the device, and records registration.
中文简介正在准备中。当前显示英语简介。
Use this skill for hands-on DOCA Ethernet packet-queue work on a BlueField DPU or ConnectX NIC — bringing up a `doca_eth_rxq` or `doca_eth_txq` on a port / representor / SF, picking among the four `enum doca_eth_rxq_type` values (`_REGULAR` / `_CYCLIC` / `_MANAGED_MEMPOOL` / `_SHARED_MEMPOOL`), sizing burst or scatter-gather length against the `_cap_*` queries, submitting `doca_eth_txq_task_send` / `_lso_send` (carrying packet `doca_buf`s — no `doca_eth_frame` struct exists), or debugging DOCA_ERROR_* from an Ethernet call. `doca_eth_rxq` and `doca_eth_txq` are two Core contexts; one `doca_ctx_start()` does not cover both. Trigger on implicit phrasings: "my RX queue is up but no packets arrive", "send-task returns AGAIN at line rate", "which queue type for fixed-MTU ingress", "device open fails without sudo", or "is L3 checksum offload available here". Refuse and route elsewhere for installing DOCA, flow-rule / steering programming, host↔DPU control messaging, or RDMA data movement.
中文简介正在准备中。当前显示原文说明。
嵌入式网络调试工具，用于发现接口、抓包、分析 pcap/pcapng、做连通性测试、端口扫描和流量统计。 当用户提到 Wireshark、tshark、Npcap、抓包、网络联调、端口扫描、连通性排查、pcap 分析、 网络接口、ping 测试、traceroute、流量统计、Modbus TCP、EtherNet/IP 等网络协议调试时自动触发， 也兼容 /net 显式调用。即使用户只是说"抓个包看看"、"扫一下端口"、"网络通不通"或"分析一下这个 pcap"， 只要上下文中出现具体工具名（tshark、Wireshark、Npcap）、协议名（Modbus TCP、EtherNet/IP、ICMP 等）、 调试动作（抓包、端口扫描、连通性测试、ping、traceroute、流量统计、pcap 分析）或网络接口操作，就应触发此 skill。
中文简介正在准备中。当前显示原文说明。
Firmware development for the Guition JC-ESP32P4-M3-DEV board (JC-ESP32P4-M3 module — ESP32-P4NRW32 with 32 MB in-package PSRAM, 16 MB flash, and an ESP32-C6 radio co-processor on SDIO) — its MIPI-DSI panel and MIPI-CSI camera connectors, IP101 Ethernet, ES8311 codec with speaker amplifier and microphone, microSD on SDMMC, RS485, three USB-C sockets, the 26-pin JP1 header, and the PlatformIO + ESP-IDF (pioarduino) setup around them. Use when working on this board or any ESP32-P4 devkit: project setup, platformio.ini and sdkconfig.defaults, the silicon revision split between rev v1.3 and rev v3.x, why the bootloader dies with "Illegal instruction", the pin map and which header pins are traps, Wi-Fi through esp_hosted and esp_wifi_remote, mounting the TF card and its on-chip LDO, bringing up a DSI panel, the shared I2C bus, audio direction and the amplifier enable, Ethernet RMII pins, choosing a free GPIO, flashing over any of the three USB-C ports, or debugging why something on the board does not work.
中文简介正在准备中。当前显示原文说明。
Enable Jetson Thor 25G/10G/1G MGBE QSFP via kernel-DT overlay. Do NOT use for UPHY lane allocation or ODMDATA edits.
中文简介正在准备中。当前显示原文说明。
Raw verbs inside DOCA Core (doca-verbs): direct control of QP, CQ, PD, SRQ and address-handle objects through doca_verbs_context, doca_verbs_qp_create / doca_verbs_qp_modify and doca_verbs_cq_create, porting libibverbs code into DOCA Core, or a QP attribute, opcode or WR flag the doca-rdma task API does not expose. Trigger on "raw QP attribute the task API does not expose", "porting libibverbs code", "IO_FAILED on WR submit", "QP state transition rejected", or "attach a congestion-control group", even without naming doca-verbs. Its first job is to route MOST users back up to doca-rdma, doca-eth or doca-rmax. Covers CC-group and Ethernet SQ/RQ primitives, capability queries via doca_verbs_query_device, and DOCA_ERROR_* from doca_verbs_* calls. Refuse and route elsewhere for ordinary doca-rdma / doca-eth / doca-rmax workloads, DOCA install, Core internals, and general libibverbs theory.
中文简介正在准备中。当前显示原文说明。
Run `doca_bench` (DOCA 2.7.0 or newer) to measure throughput, bulk latency, precision latency, or maximum bandwidth for RDMA, Compress, AES-GCM, SHA, DMA, EC, Ethernet, Comch, or GPUNetIO on a host or BlueField Arm. Use it to discover enabled benchmark libraries, capture a reproducible command/version/device/environment baseline, compare stable runs against a declared tolerance, or diagnose configuration, device-binding, workload-precondition, and measurement failures. Trigger for requests such as measuring BlueField compression speed, NIC RDMA throughput, crypto latency, or a pre-upgrade baseline. Do not use for application end-to-end timing, custom benchmark code, DOCA installation, or binary patches.
中文简介正在准备中。当前显示原文说明。
Use this skill when the user is doing hands-on DOCA GPUNetIO programming — wiring a CUDA kernel on an NVIDIA GPU to a doca-eth queue via doca_gpu_eth_rxq / doca_gpu_eth_txq, standing up the per-CUDA-device doca_gpu context, designing the persistent CUDA kernel that drains the GPU-visible queue, running the dual capability check (DOCA cap-query plus cudaGetDeviceProperties), registering cudaMalloc pools via doca_buf_arr_create_*, or debugging DOCA_ERROR_* returns from the GPUNetIO API. Trigger even when the user does not explicitly mention "DOCA GPUNetIO" or "persistent kernel" — typical implicit phrasings include "CUDA kernel reading packets directly from the NIC", "GPU-initiated networking on BlueField", "DOCA_ERROR_DRIVER on doca_gpu_create", "nvidia_peermem not loaded", "kernel-per-packet is too slow", or "which GPU supports GPU-side packet I/O". Refuse and route elsewhere for general CUDA programming, DOCA Ethernet queue bring-up, DOCA DPA, or DOCA install — those belong to other skills.
中文简介正在准备中。当前显示原文说明。
Operational Technology and industrial control system security — Purdue model segmentation, industrial protocol analysis (Modbus, DNP3, S7, EtherNet/IP), PLC/HMI exposure, IEC 62443 alignment, and MITRE ATT&CK for ICS, for authorized and safety-conscious assessments
中文简介正在准备中。当前显示原文说明。
ICS/SCADA/OT exploitation - Modbus (502), S7comm (102), EtherNet/IP (44818), DNP3, OpenPLC, Node-RED SCADA, PLC/HMI/coil/holding-register attacks. Use when a target exposes industrial protocols or the goal is to drive a plant to a dangerous state (over-pressure/over-speed/disable interlock) and read the flag the HMI/CCTV reveals.
中文简介正在准备中。当前显示原文说明。
Safely diagnose and improve local network speed, latency, jitter, DNS, Wi-Fi, Ethernet, macOS network services, and bufferbloat. Use this skill whenever the user asks to optimize internet/network speed, make the network faster, diagnose slow Wi-Fi, latency, packet loss, DNS delay, unstable Codex/AI tool connectivity, or asks about the viral Codex network optimization workflow. Always protect VPN/proxy tools such as Clash Verge, Mihomo, Shadowrocket, Tailscale, V2Ray, Surge, and corporate VPNs; do not modify or disable them unless the user explicitly asks for that specific change.
中文简介正在准备中。当前显示原文说明。
Industrial communication protocols for Zephyr RTOS. Covers Modbus RTU (serial), Modbus TCP (Ethernet/Wi-Fi), and CANopen basics. Trigger when building factory automation controllers, industrial sensors, or medical equipment interfaces.
中文简介正在准备中。当前显示原文说明。