跳到正文
cccskills
免费在 GitHub 公开

bench-virtual-rule

Mirror a preset virtual rule (selectors under `nodeRules` in preset.html-standard.jsonc and similar) into bench/config.ts so the benchmark exercises it. Use when a new disallowed-element / similar selector lands in a preset and the matching nu fixtures remain stuck at nu-only despite the new rule existing in markuplint. Trigger keywords: virtual rule, nodeRules, disallowed-element, preset html-standard, bench config mirror, rule does not fire on bench, preset rule not exercised.

中文简介正在准备中。当前显示原文说明。

markuplint/markuplint星标 630(GitHub 630 + cccskills 0)

实测评分 未实测

查看安装方法

包含的文件（1）

  • SKILL.md2.3 KB

SKILL.md（原文）

安装前可以查看交给 AI 代理的指令内容。

Bench Virtual Rule Mirror Skill

bench/config.ts does not extends: ['markuplint:html-standard']. It curates rules explicitly so the bench surface stays scoped to nu-validator capability. Consequence: any new entry in a preset's nodeRules[] is invisible to the benchmark until the same selectors are mirrored into bench/config.ts. Symptom: fixtures the new virtual rule should detect remain at nu-only and look like a markuplint coverage gap when the rule already exists.

Procedure

  1. Add the selector(s) to the relevant preset (preset.html-standard.jsonc or similar).
  2. Mirror the same selectors into bench/config.ts nodeRules[] with a comment naming the source preset rule (e.g. // Mirrors html-standard/no-duplicate-charset).
  3. Run yarn bench:update:ml.
  4. Verify the target fixtures flipped from nu-only → match-error. If they didn't, the selectors don't actually match those fixtures — check selector syntax (caveats below).
  5. If the rule does not map onto any nu-validator capability, skip step 2 and add a // not mirrored: <reason> comment to the preset rule's JSDoc so the next maintainer knows it was a conscious decision.

Selector caveats

  • HTML attribute names are matched ASCII case-insensitively ([charset] matches <meta CHARSET>). Use lowercase to match HTML's normative form.
  • The i flag (e.g. [name="description" i]) only applies to attribute values — it is unnecessary for the name, which is already case-folded for HTML.
  • Sibling selectors (~) only match elements after the anchor. Coexistence-style constraints typically need both directions (a ~ b and b ~ a) so the rule fires regardless of source order.

评价

还没有评价。欢迎分享你的使用感受。

评论

无需登录即可发表。欢迎分享使用感受、提问，或说明在哪些环境下无法运行。

还没有评论。来写第一条吧。

提交后会立即公开。请勿填写邮箱、电话等个人信息。URL 最多 2 个。

0 / 1000 字

此表单受 reCAPTCHA 保护，适用 Google 的隐私权政策和服务条款。

同一仓库的技能

bench-maintain

免费

Maintenance of the nu-validator coverage benchmark: defend the invariants (nu-only = 0, xref audit green), follow up a nu-validator upstream update (submodule bump / Docker image drift), and regression-check after markuplint rule or spec changes. Use when updating the validator submodule, when a bench refresh surfaces new nu-only entries, when excluded-ids entries go stale, or for the periodic health check. Trigger keywords: bench maintain, bench maintenance, nu update, submodule bump, validator update, bench refresh, nu-only regression, stale excluded-ids, image digest.

中文简介正在准备中。当前显示原文说明。

markuplint/markuplint6302026年10月26日 更新

bench-rule-enable

免费

Enable an existing or newly-added markuplint rule on the nu-validator bench by editing tests/external/bench/config.ts. Covers the flat-rule case (rules: { '<name>': true }) and the severity override case (rules: { '<name>': { severity: 'error' } }) that bench-virtual-rule does not. Use when a rule exists in the registry but the relevant nu fixtures stay nu-only because the rule is not enabled in the bench config, or when a rule's default severity is warning but the spec text it mirrors is a MUST / MUST NOT. Trigger keywords: enable bench rule, bench config flat rule, severity override bench, rule not flagging on bench, warning vs error in bench, escalate severity bench, no-contradictory-aria-prop bench, bench coverage missing rule.

中文简介正在准备中。当前显示原文说明。

markuplint/markuplint6302026年10月26日 更新

bench-setup

免费

Set up the nu-validator benchmark environment — initialise the validator submodule, ensure Docker is running, populate the gitignored raw snapshots via yarn bench:update. Also covers Docker / nu-runner troubleshooting. Use when bench commands fail with "no snapshots found", "Docker daemon not reachable", port 28888 conflicts, or healthcheck timeouts; or when refreshing the bench after a long break. Trigger keywords: bench setup, bench Docker, validator submodule, no snapshots found, Docker daemon not reachable, healthcheck times out, port 28888, yarn bench:update first time, bench install, fresh clone bench.

中文简介正在准备中。当前显示原文说明。

markuplint/markuplint6302026年10月26日 更新

bench-triage

免费

Triage one nu-only fixture from tests/external/snapshots/diff/nu-only.json by reading the spec, then drive its verdict to match-error, match-clean, or nu-over by either fixing markuplint or recording an excluded-ids.json entry. The core per-fixture operation of the nu-validator coverage benchmark. Use when a bench refresh surfaces new nu-only entries, when checking a coverage-claim ("markuplint misses X" / "over-detects Y") against the bench, or when classifying a specific fixture. Trigger keywords: nu-only, ml-only, coverage gap, bench triage, verdict, match-error, match-clean, nu-over, excluded-ids, declare nu over-detection, claim audit, audit fixture, mark-up valid per spec, spec-cited exclusion.

中文简介正在准备中。当前显示原文说明。

markuplint/markuplint6302026年10月26日 更新

bench-xref

免费

Sync benchmark cross-reference blocks onto GitHub Issue bodies via `yarn bench:xref`, manage `tests/external/bench/issue-xref.config.ts` mappings, and run the pre-release checklist. Use when adding / removing / updating a primary or secondary mapping, when an issue closes upstream, when the xref CLI's output disagrees with what's on the issue body, or before cutting a release that touches a rule the benchmark covers. Trigger keywords: bench-xref, issue-xref, xref CLI, GitHub issue body, primary mapping, secondary mapping, umbrella block, pre-release checklist, bench-xref-audit workflow, marker version.

中文简介正在准备中。当前显示原文说明。

markuplint/markuplint6302026年10月26日 更新

create-issue

免费

Investigate a problem to its root cause and file it as a GitHub Issue with the right labels and an As is / To be / Why / How body backed by primary sources. Use when asked to file, create, or open an issue, or when the `impl` skill hands over a carry-over. Trigger keywords: create issue, file an issue, open an issue, report a bug as an issue.

中文简介正在准备中。当前显示原文说明。

markuplint/markuplint6302026年10月26日 更新

查看 markuplint 的全部技能

报告此技能的问题