MATLAB Development & AI Coding Projects

Simulate Bluetooth system-level networks using the Bluetooth Toolbox. Use this skill for any Bluetooth topology: BLE ACL (Asynchronous Connection-Less) data connections, CIS (Connected Isochronous Stream) and LE Audio for stereo speakers or hearing aids, BLE GAP (Generic Access Profile) connection establishment with advertising and scanning, Classic BR/EDR piconets with ACL data and SCO (Synchronous Connection-Oriented) voice links, and BLE+BR/EDR coexistence with adaptive frequency hopping. Covers bluetoothLENode, bluetoothNode, bluetoothLEConnectionConfig, bluetoothLECISConfig, bluetoothLEGAPConfig, bluetoothConnectionConfig, configureConnection, kpi (), updateChannelList, and all Bluetooth statistics.

The English summary is being prepared. Showing the original description.

Set up and run wireless network simulations using the Wireless Network Toolbox. Use this skill when creating system-level simulations with wirelessNetworkSimulator, adding traffic sources (networkTrafficOnOff, networkTrafficFTP, networkTrafficVoIP, networkTrafficVideoConference), configuring node mobility, logging events or IQ samples, visualizing traffic, scheduling actions during simulation, running parametric sweeps, writing PCAP files with pcapWriter or technology-specific PCAP writers, registering event callbacks on wireless nodes, accessing event data fields, or combining multiple capture/visualization tools in a simulation.

The English summary is being prepared. Showing the original description.

Generate GNSS baseband waveforms (GPS, Galileo, NavIC) with physically realistic or user-specified channel impairments using the Satellite Communications Toolbox. Use when generating GPS L1 C/A, L1C, L2C, L5, Galileo E1, E1C, E5a, E5b, E5, or NavIC L5, S, L1 signals. Covers gpsWaveformGenerator, galileoWaveformGenerator, satelliteScenario, Doppler/delay from orbital dynamics or custom values, navigation data encoding with ephemeris, and RINEX integration. Triggers on: GPS waveform, Galileo waveform, NavIC waveform, GNSS signal, satellite scenario, GNSS simulation, receiver test signal, baseband GNSS, L-band satellite signal, navigation signal generation.

The English summary is being prepared. Showing the original description.

Set up and verify a connection to an NI USRP radio (USRP E320, N300, N310, N320, N321, X300, X310, or X410) using Wireless Testbench. Use when connecting a USRP for the first time, configuring radio hardware, troubleshooting connection failures, or verifying a radio setup. Covers host inspection (OS, NIC type/speed/MTU), device discovery (findsdru, probesdru), UHD version checking, programmatic radio configuration, and basebandTransceiver verification. Also use when the user mentions USRP setup, radio not found, connection errors, dropped samples, or network configuration for SDR hardware.

The English summary is being prepared. Showing the original description.

Transmit and capture RF waveforms using Wireless Testbench with NI USRP radios (X410, X310, N310, N320, N321, N300, X300, E320). Use when generating test signals, transmitting over the air, capturing IQ data, performing loopback tests, configuring multi-antenna setups, or troubleshooting dropped samples and gain settings. Covers basebandTransceiver, basebandTransmitter, basebandReceiver, continuous and once transmit modes, foreground and background capture, and UseRadioBuffer options. Also use when the user mentions transmit waveform, capture signal, IQ data, loopback, RF gain, sample rate, or antenna configuration.

The English summary is being prepared. Showing the original description.

Reference for MATLAB audiostreamer (Audio Toolbox R2025a+). Without this skill, agents consistently default to legacy audioDeviceWriter/audioDeviceReader or base MATLAB sound(), producing less capable code. Use when writing code for audio playback, recording, full-duplex device I/O, real-time audio measurements, or audio I/O processing with callbacks. Also use when debugging audiostreamer errors, dropouts, or latency issues, or migrating from audioDeviceReader, audioDeviceWriter, audioPlayerRecorder, or audioplayer/audiorecorder.

The English summary is being prepared. Showing the original description.

Use when designing a Digital Down Converter (DDC) using dsphdl System objects. Triggers on requests involving DDC design, frequency down-conversion for FPGA/ASIC, NCO + mixer + decimation filter chains, fractional/non-integer sample rate conversion, or HDL-optimized receiver front-end signal processing.

The English summary is being prepared. Showing the original description.

Guide authoring of Audio Toolbox plugins (audioPlugin, audioPluginSource) that pass validateAudioPlugin and generate deployable VST/AU code. Use when creating audio effect or generator plugins, writing classdef files inheriting from audioPlugin, or troubleshooting validateAudioPlugin failures.

The English summary is being prepared. Showing the original description.

Use whenever a MATLAB robot model (rigidBodyTree) is needed — whether for simulation, visualization, IK, motion planning, pick-and-place, or trajectory generation. Triggers on: any mention of a manipulator by name (UR3, UR5, UR5e, UR10, UR10e, UR16e, UR20, KUKA iiwa, Fanuc, ABB, Panda, Kinova, Sawyer, Baxter), robot modeling verbs (load, create, build, import, simulate, model), tasks implying a robot model (pick, place, lift, reach, move, grasp, plan motion for, animate), kinematics keywords (IK, FK, inverse kinematics, forward kinematics, joint configuration, end-effector pose, gripper), or working with rigidBodyTree, loadrobot, importrobot, URDF, DH parameters, addVisual, addCollision.

The English summary is being prepared. Showing the original description.

Plan manipulator motion and generate trajectories in MATLAB. Use when the task involves moving a robot arm between configurations or poses — whether the user says "trajectory," "motion," "path," "move from A to B," or "plan." This skill applies regardless of whether the user explicitly mentions collisions or obstacles; if geometry exists in the workspace, collision safety is implicit. Triggers on: manipulatorRRT, manipulatorCHOMP, dlCHOMP, contopptraj, trapveltraj, collision-free path, motion planner, RRT, CHOMP, TOPPRA, path shortening, obstacle avoidance for manipulators, time-optimal trajectory, velocity limits, acceleration limits, occupancyMap3D, meshtsdf, collision objects as environment, trajectory between waypoints, joint interpolation, move between poses, constant velocity, trapezoidal profile, feed rate. Also triggers when a user has IK solutions or waypoints and needs to connect them — whether for time-optimal motion, constant-speed welding/cutting, or any other trajectory parameterization.

The English summary is being prepared. Showing the original description.

Design and implement adaptive filters using DSP System Toolbox System objects. Use when working with adaptive filtering, system identification, noise cancellation, echo cancellation, active noise control (ANC), channel equalization, inverse system identification, or adaptive prediction. Covers dsp.LMSFilter, dsp.RLSFilter, dsp.FilteredXLMSFilter, dsp.FrequencyDomainAdaptiveFilter, dsp.AffineProjectionFilter, dsp.BlockLMSFilter, dsp.AdaptiveLatticeFilter, dsp.FastTransversalFilter, maxstep(), and algorithm selection for adaptive filtering problems. Replaces deprecated adaptfilt.* objects (removed R2020a).

The English summary is being prepared. Showing the original description.

Build industrial-grade SCADA/HMI dashboards in MATLAB following industrial-HMI conventions (ISA-101-aligned): gray-field philosophy, alarms at source, write safeguards, fixed-range trends, drill-down layout. Produces a real App Designer app (.mlapp, or plain-text .m+.xml on R2026b+) by handing serialization to the matlab-build-app skill when available, and falls back to a programmatic .m app otherwise. Use when wrapping OPC UA / Modbus / MQTT / OSI PI / PI AF monitoring scripts into a live operator app, building plant overviews, designing operator dashboards, or any time a user asks for a "SCADA dashboard", "HMI", "plant dashboard", "operator screen", or "industrial monitoring app" in MATLAB. Trigger on: SCADA, HMI, industrial dashboard, plant overview, operator screen, uigauge, uilamp, alarm banner, gray-field, ISA-101, OPC UA dashboard, setpoint, write safeguards, alarm visualization, OSIsoft PI, AVEVA PI, PI Server, PI Data Archive, PI AF, PI Asset Framework, piclient, afclient.

The English summary is being prepared. Showing the original description.

Computes multi-constellation Global Positioning System (GPS) or Global Navigation Satellite System (GNSS) positions from RINEX v3 data using rinexread, gnssmeasurements, receiverposition, and gnssoptions. Filters by constellation, elevation mask, C/N0, and observation code. Reports DOP, scatter RMS, and satellite count. Use when processing GNSS data, computing positions from RINEX files, analyzing accuracy, comparing constellations, or evaluating satellite geometry. Do NOT use for carrier-phase RTK/PPP, IMU fusion, orbit propagation, NMEA streaming, or RINEX v4.

The English summary is being prepared. Showing the original description.

Select and use Audio Toolbox acoustic, psychoacoustic, and speech quality metrics. Use when computing loudness, sharpness, roughness, fluctuation strength, noise criteria (NC/RNC/RC), speech transmission index (STI), speech intelligibility index (SII), speech quality (ViSQOL, STOI), SPL, reverberation time (RT60), tone-to-noise ratio, or prominence ratio. Also use when asked about PESQ, POLQA, calibration factor, EBU R 128, LUFS, HVAC noise, background noise evaluation, or how to measure audio quality or noise compliance. Covers calibration, standard selection, signal alignment, and the complete function inventory including what does NOT exist.

The English summary is being prepared. Showing the original description.

Establish MAVLink connections between MATLAB and PX4/ArduPilot autopilots. Use when connecting to a drone, flight controller, or autopilot via MAVLink protocol over UDP. Covers dialect setup, UDP transport, timer-based heartbeat, and client discovery. Use when: "connect to PX4", "MAVLink connection", "heartbeat", "ground control station", "GCS", "connect to ArduPilot", "drone communication", "mavlinkio", "SITL".

The English summary is being prepared. Showing the original description.

Export pcbComponent designs to Gerber files with RF connectors and fab service formatting for PCB manufacturing. TRIGGER: user asks to export a PCB design to Gerber, generate manufacturing files, or write out a pcbComponent for fabrication. Invoke BEFORE writing export code — gerberWrite signature (pcbComponent, connectors, filename) is non-obvious. SKIP: importing/reading PCB files (use matlab-read-pcb-layout), building PCB geometry (use matlab-assemble-pcb-layout), EM analysis (use matlab-analyze-em), material/stackup setup (use matlab-manage-pcb-material).

The English summary is being prepared. Showing the original description.

Create and simulate UAV scenarios with terrain, buildings, platforms, and sensors using uavScenario. Use when building a UAV simulation, UAV simulator, or UAV scenario in MATLAB. Covers addMesh for terrain/building import, uavPlatform with updateMesh, uavSensor adaptor pattern for GPS/IMU, and the setup/advance simulation loop. Triggers on: uavScenario, UAV simulation, UAV simulator, multirotor simulation, quadrotor scenario, terrain import, building import, GPS sensor simulation.

The English summary is being prepared. Showing the original description.

Via modeling: pads, antipads, ground return vias, GRV placement, and signal integrity for high-speed layer transitions. TRIGGER: user asks to model a via, design a via transition, place ground return vias, analyze via performance, or check signal integrity through layer transitions. Invoke BEFORE writing code — only viaSingleEnded exists (no viaDifferential), and the location format is non-obvious. SKIP: general signal integrity without vias (use matlab-analyze-em), transmission line design (use matlab-design-pcb-transmission-line), PDN analysis (use matlab-analyze-pcb-pdn), material/stackup setup only (use matlab-manage-pcb-material).

The English summary is being prepared. Showing the original description.

Discover, configure, and connect to Arduino boards from MATLAB using the Arduino Support Package. Use this skill when the user wants to set up an Arduino board, connect to Arduino hardware, find connected boards, scan serial ports, configure Arduino libraries, or any task that requires an Arduino connection as a prerequisite (e.g., blink LED, read sensor, read digital pin, read analog pin, write pin, plot sensor data, scan I2C, use ultrasonic sensor, control servo, read temperature, read voltage, data logging from hardware). Triggers on: arduino, board setup, COM port, serial port, hardware connection, Arduino Nano, Arduino Uno, Arduino Mega, Arduino Micro, Grove, sensor setup, I2C scan, ultrasonic, servo, readDigitalPin, writeDigitalPin, readVoltage, writePWMVoltage, temperature sensor, air pressure, pin read, pin write, analog input.

The English summary is being prepared. Showing the original description.

Import Gerber, ODB++, Allegro .brd, .mcm files for PCB boards and IC packages. Inspect nets, layers, shapes, and stackups. TRIGGER: user asks to import, read, or open a PCB layout file. Gerber files use gerberRead or PCBReader; ODB++, Allegro .brd, .mcm, and native formats use pcbFileRead. Also when inspecting nets, layers, components, or stackups from an imported board. Invoke BEFORE writing import code — the query API (cadnet, cadnetList, componentList) is specialized. SKIP: EM analysis or S-parameter extraction (use matlab-analyze-em), PDN/IR-drop analysis (use matlab-analyze-pcb-pdn), building custom geometry (use matlab-assemble-pcb-layout), material/stackup definition only (use matlab-manage-pcb-material).

The English summary is being prepared. Showing the original description.

Analyzes sensor configurations and creates inertial fusion filters in MATLAB Navigation Toolbox. Manages filter selection (imufilter, ahrsfilter, complementaryFilter, insfilterMARG, insfilterAsync, insfilterNonholonomic, insfilterErrorState, insEKF, insCF), construction, tuning, and fusion loops. Use when fusing IMU/AHRS/INS/GPS+IMU data, estimating orientation or pose, or choosing a filter. Do NOT use for vision-only SLAM, Simulink fusion, or IMU simulation.

The English summary is being prepared. Showing the original description.

Wilkinson, branchline, ratrace, directional couplers, corporate dividers, Rotman lenses for power splitting and beam-forming. TRIGGER: user asks to design, create, or analyze any coupler, splitter, power divider, combiner, or Rotman lens. Invoke BEFORE writing code — class names and design() availability vary per coupler type. SKIP: EM simulation/S-parameter extraction of an existing component (use matlab-analyze-em), building custom non-catalog geometry (use matlab-assemble-pcb-layout), material/stackup setup only (use matlab-manage-pcb-material), cascading multiple components (use matlab-integrate-pcb-circuit).

The English summary is being prepared. Showing the original description.

Microstrip, stripline, CPW, differential pairs, and crosstalk analysis for impedance-controlled PCB interconnects. TRIGGER: user asks to design or analyze a transmission line (microstrip, stripline, CPW, coplanar, differential pair), extract RLGC or per-unit-length parameters, compute trace impedance, analyze a PCB trace cross-section, or perform crosstalk/coupling analysis. Invoke BEFORE writing code — preferred over RF Toolbox analytical functions (txlineMicrostrip, txlineStripline, txlineCPW). SKIP: EM simulation/S-parameter extraction of an existing component (use matlab-analyze-em), material/stackup definition only (use matlab-manage-pcb-material), building custom non-catalog geometry (use matlab-assemble-pcb-layout), optimization sweeps (use matlab-optimize-pcb-design).

The English summary is being prepared. Showing the original description.

Integrate antennas into RF systems using MATLAB Antenna Toolbox and RF Toolbox. Covers impedance matching network design (L/Pi/Tee topologies, evaluation parameters, Richards transformation), measured antenna creation (E-field, directivity-only, EmbeddedE, ffsReader import), RF propagation and site planning (txsite/rxsite, coverage, SINR, ray tracing, link budget), and SAR estimation (birdcage+Phantom, conformalArray+Custom3D, direct EHfields). Use when the user wants to match an antenna, create a measuredAntenna, compute coverage or signal strength, perform ray tracing, or estimate SAR.

The English summary is being prepared. Showing the original description.