Turn a timestamped rainfall CSV (design storm, gauge record, climate-scenario series) into a MIKE+ rainfall .dfs0 via the mike-plus MCP server, verified by read-back, ready to drive a model's rainfall boundary or to sit on top of a hydrograph figure. Use when the user brings rain as CSV or asks to run a model with a different storm. No license required (writing the file); wiring it into the model needs one.
한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.
설치 방법 보기설치하기 전에 에이전트에게 전달되는 지시 내용을 확인할 수 있습니다.
MIKE+ rainfall boundaries read a .dfs0 of Rainfall Intensity, mm/h,
mean-step-backward: exactly the shape of DHI's own example rain files
(Sirius_IDF_1year_rainfall.dfs0). This skill produces that file from a CSV.
mike_rain_to_dfs0 — {csv, out_dfs0, time_col?, value_col?, unit?, item_name?}
unit: 'mm/h' (intensity, default) or 'mm' (depth per step, converted with each step's own duration; the conversion is reported).{dfs0, item, n_steps, start, end, timestep_s, uniform_step, total_depth_mm, peak_intensity_mm_h, peak_time, conversion} after reading the file back.total_depth_mm and peak_intensity_mm_h; if uniform_step is false say so (MIKE 1D accepts irregular steps, but the user should know).mike-params on a COPY. The boundary lives in table msm_BBoundary (the rainfall row has TypeNo = 1; in Sirius_RTC its MUID is Rainfall) with columns
TSConnection = dfs0 path relative to the model folder (DHI's example: Sirius_IDF_1year_rainfall.dfs0), so write the new file into the model copy folder,TimeseriesName = the dfs0 item name (must match: pass item_name to mike_rain_to_dfs0, or set this column to Rainfall),DataTypeName = Rainfall Intensity.
mike_get_values {table: msm_BBoundary, columns: [TypeNo, TSConnection, TimeseriesName, DataTypeName]} first, then mike_set_values on that MUID, then run and check mike_results_summary..dfs0 is what mike_plot_rain_flow / mike_plot_compare take as rain_dfs0, so use it for the figure of the run it drove.mike_rain_to_dfs0 {csv, out_dfs0: runs/<case>/00_model/storm.dfs0, item_name: <existing TimeseriesName or 'Rainfall'>}
mike_get_values {sqlite: <copy>, table: msm_BBoundary, columns: [TypeNo, TSConnection, TimeseriesName]}
mike_set_values {sqlite: <copy>, table: msm_BBoundary, muids: [<rain row>], values: {TSConnection: storm.dfs0, TimeseriesName: ...}}
mike_run -> mike_results_summary (skip_hours) -> mike_plot_rain_flow {rain_dfs0: storm.dfs0}
mike_manifest_write {inputs: [csv, storm.dfs0], ...}
아직 리뷰가 없습니다. 사용해 본 소감을 남겨 주세요.
로그인 없이 쓸 수 있습니다. 사용 후기, 질문, 작동하지 않은 환경 등을 편하게 남겨 주세요.
아직 댓글이 없습니다. 첫 댓글을 남겨 보세요.
Record provenance for an Agentic MIKE+ step via the mike-plus MCP server — a manifest.json tying the model copy, inputs, edits, run QA status, result files and figures together, each file with a sha256. Use at the end of every run/compare/plot task (successful or failed) so the work can be audited, re-compared or reproduced later. No license required.
한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.
Compare two MIKE+ runs via the mike-plus MCP server — baseline vs scenario, before vs after a parameter edit — to say WHERE a change mattered and BY HOW MUCH (delta peak, delta volume, timing shift, RMSE/NSE) and to draw the overlay hydrograph. Use whenever two .res1d files of the same model exist or a re-run just finished. Comparing needs no license; producing the second run does.
한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.
Standard operating procedure for an auditable, headless MIKE+ workflow via the mike-plus MCP server — how to plan, copy, run, QA-gate, compare, plot, audit, and safely stop. Use FIRST whenever an agent is handed a MIKE+ model (.sqlite) or result (.res1d) plus a plain-language goal; it picks the operating mode and tells the agent which mike-* skill to open next and in what order.
한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.
Bring an EPA SWMM (.inp) or EPANET (.inp) model into MIKE+ via the mike-plus MCP server — the bridge from an INP builder such as SWMMCanada or agentic-swmm into a MIKE+ database that mike_model_info / mike_run can use. Use when the user has an .inp and wants it in MIKE+. Requires MIKE+ installed + a checked-out license (demo mode caps the model size).
한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.
Inspect a MIKE+ .sqlite model via the mike-plus MCP server — active simulation/scenario/model type, unit system, the list of simulation setups and scenarios, element counts — and switch the active scenario. Use when an agent needs to understand a MIKE+ model before running or editing it, or must run a scenario prepared in the GUI. Requires MIKE+ installed + a license.
한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.
Read and modify MIKE+ model parameters via the mike-plus MCP server — inspect or change values in any model table (pipe Diameter/Manning in msm_Link, node levels in msm_Node, catchment properties in msm_Catchment, etc.). Use when an agent must identify a current parameter and change it before re-running. Requires MIKE+ + license; mutating tools must run on a copy.
한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.