スキルを探す

Set up and verify a connection to an NI USRP radio (USRP E320, N300, N310, N320, N321, X300, X310, or X410) using Wireless Testbench. Use when connecting a USRP for the first time, configuring radio hardware, troubleshooting connection failures, or verifying a radio setup. Covers host inspection (OS, NIC type/speed/MTU), device discovery (findsdru, probesdru), UHD version checking, programmatic radio configuration, and basebandTransceiver verification. Also use when the user mentions USRP setup, radio not found, connection errors, dropped samples, or network configuration for SDR hardware.

日本語の概要は準備中です。原文の説明を表示しています。

Simulate Bluetooth system-level networks using the Bluetooth Toolbox. Use this skill for any Bluetooth topology: BLE ACL (Asynchronous Connection-Less) data connections, CIS (Connected Isochronous Stream) and LE Audio for stereo speakers or hearing aids, BLE GAP (Generic Access Profile) connection establishment with advertising and scanning, Classic BR/EDR piconets with ACL data and SCO (Synchronous Connection-Oriented) voice links, and BLE+BR/EDR coexistence with adaptive frequency hopping. Covers bluetoothLENode, bluetoothNode, bluetoothLEConnectionConfig, bluetoothLECISConfig, bluetoothLEGAPConfig, bluetoothConnectionConfig, configureConnection, kpi (), updateChannelList, and all Bluetooth statistics.

日本語の概要は準備中です。原文の説明を表示しています。

Transmit and capture RF waveforms using Wireless Testbench with NI USRP radios (X410, X310, N310, N320, N321, N300, X300, E320). Use when generating test signals, transmitting over the air, capturing IQ data, performing loopback tests, configuring multi-antenna setups, or troubleshooting dropped samples and gain settings. Covers basebandTransceiver, basebandTransmitter, basebandReceiver, continuous and once transmit modes, foreground and background capture, and UseRadioBuffer options. Also use when the user mentions transmit waveform, capture signal, IQ data, loopback, RF gain, sample rate, or antenna configuration.

日本語の概要は準備中です。原文の説明を表示しています。

Set up and run wireless network simulations using the Wireless Network Toolbox. Use this skill when creating system-level simulations with wirelessNetworkSimulator, adding traffic sources (networkTrafficOnOff, networkTrafficFTP, networkTrafficVoIP, networkTrafficVideoConference), configuring node mobility, logging events or IQ samples, visualizing traffic, scheduling actions during simulation, running parametric sweeps, writing PCAP files with pcapWriter or technology-specific PCAP writers, registering event callbacks on wireless nodes, accessing event data fields, or combining multiple capture/visualization tools in a simulation.

日本語の概要は準備中です。原文の説明を表示しています。

Build industrial-grade SCADA/HMI dashboards in MATLAB following industrial-HMI conventions (ISA-101-aligned): gray-field philosophy, alarms at source, write safeguards, fixed-range trends, drill-down layout. Produces a real App Designer app (.mlapp, or plain-text .m+.xml on R2026b+) by handing serialization to the matlab-build-app skill when available, and falls back to a programmatic .m app otherwise. Use when wrapping OPC UA / Modbus / MQTT / OSI PI / PI AF monitoring scripts into a live operator app, building plant overviews, designing operator dashboards, or any time a user asks for a "SCADA dashboard", "HMI", "plant dashboard", "operator screen", or "industrial monitoring app" in MATLAB. Trigger on: SCADA, HMI, industrial dashboard, plant overview, operator screen, uigauge, uilamp, alarm banner, gray-field, ISA-101, OPC UA dashboard, setpoint, write safeguards, alarm visualization, OSIsoft PI, AVEVA PI, PI Server, PI Data Archive, PI AF, PI Asset Framework, piclient, afclient.

日本語の概要は準備中です。原文の説明を表示しています。

Wilkinson, branchline, ratrace, directional couplers, corporate dividers, Rotman lenses for power splitting and beam-forming. TRIGGER: user asks to design, create, or analyze any coupler, splitter, power divider, combiner, or Rotman lens. Invoke BEFORE writing code — class names and design() availability vary per coupler type. SKIP: EM simulation/S-parameter extraction of an existing component (use matlab-analyze-em), building custom non-catalog geometry (use matlab-assemble-pcb-layout), material/stackup setup only (use matlab-manage-pcb-material), cascading multiple components (use matlab-integrate-pcb-circuit).

日本語の概要は準備中です。原文の説明を表示しています。

Bandpass, lowpass, bandstop filter design — hairpin, coupled-line, combline, stub, SIW for frequency selection and harmonic rejection. TRIGGER: user asks to design, create, or analyze any RF filter (bandpass, lowpass, highpass, bandstop, hairpin, coupled-line, combline, stub, SIW). Invoke BEFORE writing code — filter class names differ from what you would guess. SKIP: EM simulation/S-parameter extraction of an existing filter (use matlab-analyze-em), general PCB layout assembly (use matlab-assemble-pcb-layout), material/stackup setup only (use matlab-manage-pcb-material), optimization sweeps (use matlab-optimize-pcb-design).

日本語の概要は準備中です。原文の説明を表示しています。

Generate 3GPP-compliant 5G NR downlink and uplink baseband waveforms. Use to create NR signals, test model (TM) waveforms, fixed reference channels (FRC), test and measurement (T&M) signals, or test vectors for conformance testing. Covers configuring data, control, and broadcast channels and signals: PDSCH, PUSCH, PDCCH, PUCCH, SRS, SSBurst, CSI-RS, DM-RS, PT-RS, CORESET, and BWP parameters including bandwidth, subcarrier spacing (SCS), modulation (QPSK, QAM), numerology, FR1, FR2, TDD, FDD, and multi-bandwidth-part setups. Use for signal generation, RF instrument playback, or IQ baseband synthesis. Requires 5G Toolbox.

日本語の概要は準備中です。原文の説明を表示しています。

Use when importing or exporting vehicle data from/to log files (MDF/MF4/DAT, BLF, ASC/TXT), decoding CAN/CAN FD/LIN messages to signals via DBC, ARXML, or LDF databases, writing timetable data to MDF or BLF files, or calling blfread, blfinfo, blfwrite, mdfRead, mdfWrite, mdfCreate, mdfInfo, canSignalImport, canMessageImport, canMessageTimetable, canFDMessageTimetable, canSignalTimetable, or linMessageTimetable.

日本語の概要は準備中です。原文の説明を表示しています。

Find and query PI assets using MATLAB's Industrial Communication Toolbox. Two paths: (1) direct PI tag lookup via piclient + tags when user provides a tag name or description (R2022a+), (2) Asset Framework navigation via afclient when user needs element/attribute hierarchy (R2026a+). Use when working with PI AF servers, PI Data Archive tags, asset hierarchies, element templates, attribute lookup, or historical data from OSIsoft PI systems.

日本語の概要は準備中です。原文の説明を表示しています。

Port MATLAB Data Acquisition Toolbox code from the discouraged (legacy) session-based interface (daq.createSession, addAnalogInputChannel, startBackground, DataAvailable listeners, queueOutputData, wait) to the recommended DataAcquisition interface (daq("ni"), addinput, start, ScansAvailableFcn, write, preload). Use when migrating legacy DAQ scripts, converting session-API calls, working with DataAcquisition objects, writing multi-feature DAQ scripts that combine triggers, callbacks, continuous acquisition, or analog output. Also use when a user says their DAQ script "used to work" or "errors on R20XX", since modernizing legacy session-API code is a frequent fix for those failures. Trigger keywords: daq, DAQ, NI, session interface, addtrigger, addclock, ScansAvailableFcn, ScansRequiredFcn, daq.createSession, addAnalogInputChannel, startBackground, queueOutputData, DataAvailable, evt.Data, evt.TimeStamps, wait(d), preload, discouraged, legacy, modernize, R2020a.

日本語の概要は準備中です。原文の説明を表示しています。

Discovers connected MATLAB-supported hardware devices, searches by capability, and checks required support packages and add-ons. Use when the user asks what hardware is connected, finds a device that supports a capability (e.g., CAN, analog input), or checks if required support packages or add-ons are installed. Does NOT connect to, configure, or acquire data from devices — defers to device-specific skills for usage workflows.

日本語の概要は準備中です。原文の説明を表示しています。

Microstrip, stripline, CPW, differential pairs, and crosstalk analysis for impedance-controlled PCB interconnects. TRIGGER: user asks to design or analyze a transmission line (microstrip, stripline, CPW, coplanar, differential pair), extract RLGC or per-unit-length parameters, compute trace impedance, analyze a PCB trace cross-section, or perform crosstalk/coupling analysis. Invoke BEFORE writing code — preferred over RF Toolbox analytical functions (txlineMicrostrip, txlineStripline, txlineCPW). SKIP: EM simulation/S-parameter extraction of an existing component (use matlab-analyze-em), material/stackup definition only (use matlab-manage-pcb-material), building custom non-catalog geometry (use matlab-assemble-pcb-layout), optimization sweeps (use matlab-optimize-pcb-design).

日本語の概要は準備中です。原文の説明を表示しています。

Read BEFORE troubleshooting or enhancing camera image quality. Diagnoses and enhances image quality from cameras connected via Image Acquisition Toolbox or USB Webcams support package. Discovers camera capabilities at runtime, analyzes captured images for quality issues (brightness, contrast, sharpness, noise, color balance, backlighting), suggests hardware setting adjustments tailored to the specific camera, and applies Image Processing Toolbox enhancement functions. Use when a user wants to improve camera image quality, troubleshoot dark/blurry/noisy/grainy/ overexposed/washed out/color cast images, or optimize camera settings.

日本語の概要は準備中です。原文の説明を表示しています。

Connect to and acquire images from cameras in MATLAB using Image Acquisition Toolbox. Use this skill when the user wants to: use a webcam, acquire images, capture video, stream from a camera, connect to a GigE Vision camera, preview live video, list available cameras, configure camera properties, use a CoaXPress frame grabber, or use a Camera Link frame grabber. Covers USB webcams, GigE Vision, USB3 Vision, CoaXPress, Camera Link, and GenICam-compliant cameras. Always prefer videoinput from Image Acquisition Toolbox over webcam support package or gigecam.

日本語の概要は準備中です。原文の説明を表示しています。

Reference for MATLAB audiostreamer (Audio Toolbox R2025a+). Without this skill, agents consistently default to legacy audioDeviceWriter/audioDeviceReader or base MATLAB sound(), producing less capable code. Use when writing code for audio playback, recording, full-duplex device I/O, real-time audio measurements, or audio I/O processing with callbacks. Also use when debugging audiostreamer errors, dropouts, or latency issues, or migrating from audioDeviceReader, audioDeviceWriter, audioPlayerRecorder, or audioplayer/audiorecorder.

日本語の概要は準備中です。原文の説明を表示しています。

Extract features from 1D signals using signalTimeFeatureExtractor, signalFrequencyFeatureExtractor, and signalTimeFrequencyFeatureExtractor. Use when computing time-domain features (amplitude, energy, shape factors), frequency-domain features (spectral location, power, bandwidth, PSD), or time-frequency features (spectral shape, instantaneous, ridges, wavelet, EMD-derived) on a per-frame basis. Use when the user asks to "extract features", "compute spectral features", "build a feature table for a classifier", "get per-frame statistics", "run feature extraction on this signal", or describes a vibration / biosignal / radar / sensor signal needing features for downstream ML or analysis. Includes optional GPU acceleration via canUseGPU and gpuArray. Does not cover filter design, audio-specific feature extraction (use audioFeatureExtractor in Audio Toolbox instead), batch dataset orchestration, or 2D / image features.

日本語の概要は準備中です。原文の説明を表示しています。

Design and implement real-time audio processing chains using Audio Toolbox streaming objects. Use when building frame-based audio processing loops, multiband filters, dynamic range control, parametric EQ, level metering, loudness metering, SPL metering, octave-band analysis, sample rate conversion, frequency-domain filtering (long impulse responses, custom filter banks), or audio chains in Simulink. Covers visualization (visualize method), interactive tuning (parameterTuner), MIDI control, and Audio Toolbox Simulink blocks. Use when the user says "real-time audio", "streaming audio", "audio filter", "compressor", "equalizer", "level meter", "loudness meter", "SPL meter", "octave bands", "crossover filter", "audio chain", "MIDI control", "convolution reverb", "impulse response streaming", "frequency-domain filter", or asks to process audio frame-by-frame.

日本語の概要は準備中です。原文の説明を表示しています。

Design and implement adaptive filters using DSP System Toolbox System objects. Use when working with adaptive filtering, system identification, noise cancellation, echo cancellation, active noise control (ANC), channel equalization, inverse system identification, or adaptive prediction. Covers dsp.LMSFilter, dsp.RLSFilter, dsp.FilteredXLMSFilter, dsp.FrequencyDomainAdaptiveFilter, dsp.AffineProjectionFilter, dsp.BlockLMSFilter, dsp.AdaptiveLatticeFilter, dsp.FastTransversalFilter, maxstep(), and algorithm selection for adaptive filtering problems. Replaces deprecated adaptfilt.* objects (removed R2020a).

日本語の概要は準備中です。原文の説明を表示しています。

Prevents crashes due to problematic scope-related API misuse caused by agent escalation into internal scope framework objects. Use when configuring properties of scope-related Simulink blocks or MATLAB objects — constrains the agent to documented APIs and directs users to the scope UI when a property is not programmatically accessible.

日本語の概要は準備中です。原文の説明を表示しています。

Design and validate digital filters in MATLAB. Use when cleaning up noisy signals, removing interference, filtering signals, designing FIR/IIR filters (lowpass/highpass/bandpass/bandstop/notch), or comparing filters in Filter Analyzer.

日本語の概要は準備中です。原文の説明を表示しています。

Translate NI-DAQmx C function signatures into correct calldaqlib MATLAB calls. Use when the user mentions calldaqlib, any DAQmx* C function name (DAQmxCfgSampClkTiming, DAQmxExportSignal, DAQmxSetStartTrigRetriggerable, DAQmxGetSampClkRate, etc.), or needs NI-DAQmx functionality not exposed by the daq object. Covers: projection rules (taskHandle implicit, output pointers become return values, buffer-size args, enum-as-string), multi-task semantics, start() clobber, device-level empty-daq workaround, dictionary returns, string getter placeholder, array getter placeholder. Trigger contexts: low-level DAQ, escape hatch, retriggerable acquisition, shared timebase, export signal, connect terminals, external sample clock, trigger configuration, NI driver, C function translation.

日本語の概要は準備中です。原文の説明を表示しています。

Plan manipulator motion and generate trajectories in MATLAB. Use when the task involves moving a robot arm between configurations or poses — whether the user says "trajectory," "motion," "path," "move from A to B," or "plan." This skill applies regardless of whether the user explicitly mentions collisions or obstacles; if geometry exists in the workspace, collision safety is implicit. Triggers on: manipulatorRRT, manipulatorCHOMP, dlCHOMP, contopptraj, trapveltraj, collision-free path, motion planner, RRT, CHOMP, TOPPRA, path shortening, obstacle avoidance for manipulators, time-optimal trajectory, velocity limits, acceleration limits, occupancyMap3D, meshtsdf, collision objects as environment, trajectory between waypoints, joint interpolation, move between poses, constant velocity, trapezoidal profile, feed rate. Also triggers when a user has IK solutions or waypoints and needs to connect them — whether for time-optimal motion, constant-speed welding/cutting, or any other trajectory parameterization.

日本語の概要は準備中です。原文の説明を表示しています。

Analyzes sensor configurations and creates inertial fusion filters in MATLAB Navigation Toolbox. Manages filter selection (imufilter, ahrsfilter, complementaryFilter, insfilterMARG, insfilterAsync, insfilterNonholonomic, insfilterErrorState, insEKF, insCF), construction, tuning, and fusion loops. Use when fusing IMU/AHRS/INS/GPS+IMU data, estimating orientation or pose, or choosing a filter. Do NOT use for vision-only SLAM, Simulink fusion, or IMU simulation.

日本語の概要は準備中です。原文の説明を表示しています。