スキルを探す

Use whenever a MATLAB robot model (rigidBodyTree) is needed — whether for simulation, visualization, IK, motion planning, pick-and-place, or trajectory generation. Triggers on: any mention of a manipulator by name (UR3, UR5, UR5e, UR10, UR10e, UR16e, UR20, KUKA iiwa, Fanuc, ABB, Panda, Kinova, Sawyer, Baxter), robot modeling verbs (load, create, build, import, simulate, model), tasks implying a robot model (pick, place, lift, reach, move, grasp, plan motion for, animate), kinematics keywords (IK, FK, inverse kinematics, forward kinematics, joint configuration, end-effector pose, gripper), or working with rigidBodyTree, loadrobot, importrobot, URDF, DH parameters, addVisual, addCollision.

日本語の概要は準備中です。原文の説明を表示しています。

Design and validate digital filters in MATLAB. Use when cleaning up noisy signals, removing interference, filtering signals, designing FIR/IIR filters (lowpass/highpass/bandpass/bandstop/notch), or comparing filters in Filter Analyzer.

日本語の概要は準備中です。原文の説明を表示しています。

Create and simulate UAV scenarios with terrain, buildings, platforms, and sensors using uavScenario. Use when building a UAV simulation, UAV simulator, or UAV scenario in MATLAB. Covers addMesh for terrain/building import, uavPlatform with updateMesh, uavSensor adaptor pattern for GPS/IMU, and the setup/advance simulation loop. Triggers on: uavScenario, UAV simulation, UAV simulator, multirotor simulation, quadrotor scenario, terrain import, building import, GPS sensor simulation.

日本語の概要は準備中です。原文の説明を表示しています。

Perform time-frequency analysis in MATLAB using CWT, STFT, synchrosqueezing, reassignment, wavelet coherence, cross spectrogram, EMD/VMD, multiresolution analysis, and time-frequency filtering. Triggers on: time-frequency, spectrogram, scalogram, cwt, stft, istft, fsst, wsst, wcoherence, xspectrogram, modwt, modwtmra, modwpt, emd, vmd, hht, tffilt, dgt, gabor, instantaneous frequency, synchrosqueezing, reassignment, ridge extraction, wavelet coherence, cross spectrum, mode decomposition, signal decomposition, time-frequency filtering.

日本語の概要は準備中です。原文の説明を表示しています。

Guide authoring of Audio Toolbox plugins (audioPlugin, audioPluginSource) that pass validateAudioPlugin and generate deployable VST/AU code. Use when creating audio effect or generator plugins, writing classdef files inheriting from audioPlugin, or troubleshooting validateAudioPlugin failures.

日本語の概要は準備中です。原文の説明を表示しています。

RF Toolbox and RF Blockset in MATLAB -- S-parameter I/O, network conversions (S/Z/Y/ABCD/T/H/G, mixed-mode), cascade/de-embedding, rfbudget analysis, circuit composition, matching networks, amplifier stability, mixer spurs, rational fitting, SI channels, baseband processing, Circuit Envelope simulation. Trigger: sparameters, Touchstone, .s2p, .s4p, rfplot, smithplot, rfparam, rfwrite, zparameters, yparameters, abcdparameters, s2sdd, cascadesparams, deembedsparams, rfbudget, noise figure, OIP3, IIP3, amplifier, modulator, nport, rffilter, attenuator, seriesRLC, shuntRLC, lcladder, txline, circuit, setports, clone, matchingnetwork, stabilityk, stabilitymu, powergain, gammams, gammaml, mixerIMT, OpenIF, rational, rationalfit, stepresp, txlineWRLGC, rf.Amplifier, rf.Mixer, rf.Filter, rf.Sparameter, rfsystem, RF Blockset.

日本語の概要は準備中です。原文の説明を表示しています。

Model, simulate, and optimize Serializer/Deserializer (SerDes) systems — serial and parallel links — using MATLAB SerDes Toolbox. Design NRZ and PAM-N links (PAM3 through PAM16) — explore equalization architectures (FFE, CTLE, DFE), sweep or optimize parameters with genetic algorithms, and characterize channels from loss models, S-parameter files, or crosstalk scenarios. Process captured waveforms through equalization chains, build eye diagrams, and decompose jitter. Deliver IBIS-AMI models for Tx, Rx, Redriver, or Retimer by exporting to Simulink and compiling .ami/.ibs/.dll/.so files. Covers the full arc from initial design exploration and parameter optimization to compliance testing and compiled model validation, including custom datapath blocks for nonstandard equalization.

日本語の概要は準備中です。原文の説明を表示しています。

Cascade PCB components, add lumped elements, export Touchstone, and bridge to eye diagram or antenna array workflows. TRIGGER: user asks to cascade or connect multiple RF PCB components, add lumped R/L/C, export S-parameters to Touchstone, or combine PCB elements into a circuit. Invoke BEFORE writing pcbcascade or circuit code — cascade rules and port matching are non-obvious. SKIP: designing individual components (use the specific matlab-design-pcb-* skill), EM analysis of a single component (use matlab-analyze-em), material/stackup setup only (use matlab-manage-pcb-material), optimization (use matlab-optimize-pcb-design).

日本語の概要は準備中です。原文の説明を表示しています。

Via modeling: pads, antipads, ground return vias, GRV placement, and signal integrity for high-speed layer transitions. TRIGGER: user asks to model a via, design a via transition, place ground return vias, analyze via performance, or check signal integrity through layer transitions. Invoke BEFORE writing code — only viaSingleEnded exists (no viaDifferential), and the location format is non-obvious. SKIP: general signal integrity without vias (use matlab-analyze-em), transmission line design (use matlab-design-pcb-transmission-line), PDN analysis (use matlab-analyze-pcb-pdn), material/stackup setup only (use matlab-manage-pcb-material).

日本語の概要は準備中です。原文の説明を表示しています。

Computes multi-constellation Global Positioning System (GPS) or Global Navigation Satellite System (GNSS) positions from RINEX v3 data using rinexread, gnssmeasurements, receiverposition, and gnssoptions. Filters by constellation, elevation mask, C/N0, and observation code. Reports DOP, scatter RMS, and satellite count. Use when processing GNSS data, computing positions from RINEX files, analyzing accuracy, comparing constellations, or evaluating satellite geometry. Do NOT use for carrier-phase RTK/PPP, IMU fusion, orbit propagation, NMEA streaming, or RINEX v4.

日本語の概要は準備中です。原文の説明を表示しています。

Microstrip, stripline, CPW, differential pairs, and crosstalk analysis for impedance-controlled PCB interconnects. TRIGGER: user asks to design or analyze a transmission line (microstrip, stripline, CPW, coplanar, differential pair), extract RLGC or per-unit-length parameters, compute trace impedance, analyze a PCB trace cross-section, or perform crosstalk/coupling analysis. Invoke BEFORE writing code — preferred over RF Toolbox analytical functions (txlineMicrostrip, txlineStripline, txlineCPW). SKIP: EM simulation/S-parameter extraction of an existing component (use matlab-analyze-em), material/stackup definition only (use matlab-manage-pcb-material), building custom non-catalog geometry (use matlab-assemble-pcb-layout), optimization sweeps (use matlab-optimize-pcb-design).

日本語の概要は準備中です。原文の説明を表示しています。

Export conversation MATLAB code to a clean, runnable .m script. Use when asked to save or export session work. TRIGGER: user asks to save, export, or generate a script from the current session's MATLAB code. Also when asked for a reproducible script or clean version of what was run.

日本語の概要は準備中です。原文の説明を表示しています。

Integrate antennas into RF systems using MATLAB Antenna Toolbox and RF Toolbox. Covers impedance matching network design (L/Pi/Tee topologies, evaluation parameters, Richards transformation), measured antenna creation (E-field, directivity-only, EmbeddedE, ffsReader import), RF propagation and site planning (txsite/rxsite, coverage, SINR, ray tracing, link budget), and SAR estimation (birdcage+Phantom, conformalArray+Custom3D, direct EHfields). Use when the user wants to match an antenna, create a measuredAntenna, compute coverage or signal strength, perform ray tracing, or estimate SAR.

日本語の概要は準備中です。原文の説明を表示しています。

Plan manipulator motion and generate trajectories in MATLAB. Use when the task involves moving a robot arm between configurations or poses — whether the user says "trajectory," "motion," "path," "move from A to B," or "plan." This skill applies regardless of whether the user explicitly mentions collisions or obstacles; if geometry exists in the workspace, collision safety is implicit. Triggers on: manipulatorRRT, manipulatorCHOMP, dlCHOMP, contopptraj, trapveltraj, collision-free path, motion planner, RRT, CHOMP, TOPPRA, path shortening, obstacle avoidance for manipulators, time-optimal trajectory, velocity limits, acceleration limits, occupancyMap3D, meshtsdf, collision objects as environment, trajectory between waypoints, joint interpolation, move between poses, constant velocity, trapezoidal profile, feed rate. Also triggers when a user has IK solutions or waypoints and needs to connect them — whether for time-optimal motion, constant-speed welding/cutting, or any other trajectory parameterization.

日本語の概要は準備中です。原文の説明を表示しています。

Optimize RF PCB dimensions for bandwidth, return loss, or area via patternsearch and surrogateopt with constraints. TRIGGER: user asks to optimize an RF PCB component for performance (bandwidth, return loss, insertion loss, area) or apply constraints to a design. Invoke BEFORE writing optimization code — RF PCB Toolbox has a built-in optimize() function that differs from generic fmincon/ga approaches. SKIP: designing a component from scratch without an optimization objective (use the specific matlab-design-pcb-* skill), EM analysis without optimization (use matlab-analyze-em), material/stackup setup only (use matlab-manage-pcb-material).

日本語の概要は準備中です。原文の説明を表示しています。

Use when importing or exporting vehicle data from/to log files (MDF/MF4/DAT, BLF, ASC/TXT), decoding CAN/CAN FD/LIN messages to signals via DBC, ARXML, or LDF databases, writing timetable data to MDF or BLF files, or calling blfread, blfinfo, blfwrite, mdfRead, mdfWrite, mdfCreate, mdfInfo, canSignalImport, canMessageImport, canMessageTimetable, canFDMessageTimetable, canSignalTimetable, or linMessageTimetable.

日本語の概要は準備中です。原文の説明を表示しています。

Port MATLAB Data Acquisition Toolbox code from the discouraged (legacy) session-based interface (daq.createSession, addAnalogInputChannel, startBackground, DataAvailable listeners, queueOutputData, wait) to the recommended DataAcquisition interface (daq("ni"), addinput, start, ScansAvailableFcn, write, preload). Use when migrating legacy DAQ scripts, converting session-API calls, working with DataAcquisition objects, writing multi-feature DAQ scripts that combine triggers, callbacks, continuous acquisition, or analog output. Also use when a user says their DAQ script "used to work" or "errors on R20XX", since modernizing legacy session-API code is a frequent fix for those failures. Trigger keywords: daq, DAQ, NI, session interface, addtrigger, addclock, ScansAvailableFcn, ScansRequiredFcn, daq.createSession, addAnalogInputChannel, startBackground, queueOutputData, DataAvailable, evt.Data, evt.TimeStamps, wait(d), preload, discouraged, legacy, modernize, R2020a.

日本語の概要は準備中です。原文の説明を表示しています。

Wilkinson, branchline, ratrace, directional couplers, corporate dividers, Rotman lenses for power splitting and beam-forming. TRIGGER: user asks to design, create, or analyze any coupler, splitter, power divider, combiner, or Rotman lens. Invoke BEFORE writing code — class names and design() availability vary per coupler type. SKIP: EM simulation/S-parameter extraction of an existing component (use matlab-analyze-em), building custom non-catalog geometry (use matlab-assemble-pcb-layout), material/stackup setup only (use matlab-manage-pcb-material), cascading multiple components (use matlab-integrate-pcb-circuit).

日本語の概要は準備中です。原文の説明を表示しています。

Find and query PI assets using MATLAB's Industrial Communication Toolbox. Two paths: (1) direct PI tag lookup via piclient + tags when user provides a tag name or description (R2022a+), (2) Asset Framework navigation via afclient when user needs element/attribute hierarchy (R2026a+). Use when working with PI AF servers, PI Data Archive tags, asset hierarchies, element templates, attribute lookup, or historical data from OSIsoft PI systems.

日本語の概要は準備中です。原文の説明を表示しています。

Connect to and acquire images from cameras in MATLAB using Image Acquisition Toolbox. Use this skill when the user wants to: use a webcam, acquire images, capture video, stream from a camera, connect to a GigE Vision camera, preview live video, list available cameras, configure camera properties, use a CoaXPress frame grabber, or use a Camera Link frame grabber. Covers USB webcams, GigE Vision, USB3 Vision, CoaXPress, Camera Link, and GenICam-compliant cameras. Always prefer videoinput from Image Acquisition Toolbox over webcam support package or gigecam.

日本語の概要は準備中です。原文の説明を表示しています。

Export pcbComponent designs to Gerber files with RF connectors and fab service formatting for PCB manufacturing. TRIGGER: user asks to export a PCB design to Gerber, generate manufacturing files, or write out a pcbComponent for fabrication. Invoke BEFORE writing export code — gerberWrite signature (pcbComponent, connectors, filename) is non-obvious. SKIP: importing/reading PCB files (use matlab-read-pcb-layout), building PCB geometry (use matlab-assemble-pcb-layout), EM analysis (use matlab-analyze-em), material/stackup setup (use matlab-manage-pcb-material).

日本語の概要は準備中です。原文の説明を表示しています。

Extract features from 1D signals using signalTimeFeatureExtractor, signalFrequencyFeatureExtractor, and signalTimeFrequencyFeatureExtractor. Use when computing time-domain features (amplitude, energy, shape factors), frequency-domain features (spectral location, power, bandwidth, PSD), or time-frequency features (spectral shape, instantaneous, ridges, wavelet, EMD-derived) on a per-frame basis. Use when the user asks to "extract features", "compute spectral features", "build a feature table for a classifier", "get per-frame statistics", "run feature extraction on this signal", or describes a vibration / biosignal / radar / sensor signal needing features for downstream ML or analysis. Includes optional GPU acceleration via canUseGPU and gpuArray. Does not cover filter design, audio-specific feature extraction (use audioFeatureExtractor in Audio Toolbox instead), batch dataset orchestration, or 2D / image features.

日本語の概要は準備中です。原文の説明を表示しています。

Bandpass, lowpass, bandstop filter design — hairpin, coupled-line, combline, stub, SIW for frequency selection and harmonic rejection. TRIGGER: user asks to design, create, or analyze any RF filter (bandpass, lowpass, highpass, bandstop, hairpin, coupled-line, combline, stub, SIW). Invoke BEFORE writing code — filter class names differ from what you would guess. SKIP: EM simulation/S-parameter extraction of an existing filter (use matlab-analyze-em), general PCB layout assembly (use matlab-assemble-pcb-layout), material/stackup setup only (use matlab-manage-pcb-material), optimization sweeps (use matlab-optimize-pcb-design).

日本語の概要は準備中です。原文の説明を表示しています。

Read BEFORE troubleshooting or enhancing camera image quality. Diagnoses and enhances image quality from cameras connected via Image Acquisition Toolbox or USB Webcams support package. Discovers camera capabilities at runtime, analyzes captured images for quality issues (brightness, contrast, sharpness, noise, color balance, backlighting), suggests hardware setting adjustments tailored to the specific camera, and applies Image Processing Toolbox enhancement functions. Use when a user wants to improve camera image quality, troubleshoot dark/blurry/noisy/grainy/ overexposed/washed out/color cast images, or optimize camera settings.

日本語の概要は準備中です。原文の説明を表示しています。