6,278 件 ・ 関連度順
概要と使いどころ
Migrate Terraform projects to Pulumi. Use when users need to move infrastructure from Terraform to Pulumi, translate HCL configurations, or convert Terraform modules to Pulumi components.
日本語の概要は準備中です。原文の説明を表示しています。
Validate markdown files against formatting standards. Auto-detects and installs markdownlint-cli if missing. Checks project config or falls back to sensible defaults. Supports auto-fix mode. Use when creating or modifying markdown files, validating documentation, or enforcing markdown conventions.
日本語の概要は準備中です。原文の説明を表示しています。
Safe systematic dependency upgrade with vulnerability scanning and rollback capability. Detects project ecosystem, audits outdated and vulnerable packages, presents a prioritized upgrade plan, and executes upgrades one at a time with test verification after each. Use when updating dependencies, fixing vulnerability alerts, or performing periodic dependency maintenance.
日本語の概要は準備中です。原文の説明を表示しています。
Guide for writing idiomatic Rust code based on Apollo GraphQL's best practices handbook. Use this skill when: (1) writing new Rust code or functions, (2) reviewing or refactoring existing Rust code, (3) deciding between borrowing vs cloning or ownership patterns, (4) implementing error handling with Result types, (5) optimizing Rust code for performance, (6) writing tests or documentation for Rust projects.
日本語の概要は準備中です。原文の説明を表示しています。
Create or update the project constitution from interactive or provided principle inputs, ensuring all dependent templates stay in sync.
日本語の概要は準備中です。原文の説明を表示しています。
General code quality review — project guideline compliance, bug detection, code quality analysis.
日本語の概要は準備中です。原文の説明を表示しています。
Extract knowledge, guidelines, and ADRs from one or more completed spec directories into the project documentation system.
日本語の概要は準備中です。原文の説明を表示しています。
Circuit simulation workflows — SPICE simulation via ngspice, confidence scoring, RF chain analysis (scikit-rf), power/clock transient and AC analysis. Trigger on: "simulate", "run simulation", "spice", "check stability", "ripple analysis". Load the canonical sim skill from `project-skills/sim/SKILL.md`.
日本語の概要は準備中です。原文の説明を表示しています。
Search DigiKey by keyword or part number, check stock and price breaks, retrieve component specifications, and download or synchronize datasheets for an electronics project. Use when the user explicitly wants DigiKey data, a DigiKey prototype-order comparison, or direct datasheet synchronization. For distributor-neutral sourcing, multi-vendor price comparison, or order-file generation, use the bom skill instead.
日本語の概要は準備中です。原文の説明を表示しています。
Create, import, analyze, resume, or revise an end-to-end Circuit Weaver electronic design from requirements through validated functional KiCad schematics, placement review, and a truthful manufacturing handoff. Use for new designs and for existing KiCad/PCB/Gerber projects that need durable state. Use kicad for one-off file inspection, bom for standalone sourcing, and design-wizard only when the user explicitly requests the slower questionnaire.
日本語の概要は準備中です。原文の説明を表示しています。
Create, import, analyze, or resume an end-to-end Circuit Weaver electronic design with durable project state. Load the canonical workflow from skills/circuit-weaver/SKILL.md. Use kicad for one-off file inspection, bom for sourcing, and design-wizard only when explicitly requested.
日本語の概要は準備中です。原文の説明を表示しています。
Analyze existing KiCad projects, schematics, PCB layouts, Gerbers, netlists, and PDF reference schematics. Use when files such as .kicad_sch, .kicad_pcb, .kicad_pro, or Gerbers are supplied and the user wants review, debugging, net tracing, ERC/DRC/DFM, schematic-to-PCB comparison, or pre-fabrication checks. Do not use to create a new design from requirements or for standalone sourcing and ordering.
日本語の概要は準備中です。原文の説明を表示しています。
Search LCSC Electronics for electronic components — find parts by LCSC number (Cxxxxx) or MPN, check stock/pricing, download datasheets, analyze specifications. Sister company to JLCPCB, same parts library. Sync and maintain a local datasheets directory for a KiCad project. No API key needed — uses the free jlcsearch community API. Use this skill when the user mentions LCSC, JLCPCB parts library, JLCPCB assembly parts, production sourcing, Cxxxxx part numbers, needs to find LCSC equivalents for parts, is preparing a BOM for JLCPCB assembly, or wants to download datasheets and LCSC is available. For package cross-reference tables and BOM workflow, see the `bom` skill.
日本語の概要は準備中です。原文の説明を表示しています。
Orchestrate AI coding agents (Claude Code, Codex, OpenCode) in isolated sandboxes using the @ai-hero/sandcastle SDK. Use when the user needs to (1) run agents AFK in Docker/Podman containers, (2) build multi-agent pipelines with plan-execute-review patterns, (3) run parallel agents on separate worktrees, (4) create iterative agent loops with maxIterations, (5) extract structured output from agent runs, (6) set up sandcastle in a new or existing project, or (7) write prompt files with template args and shell expressions.
日本語の概要は準備中です。原文の説明を表示しています。
Build a HyperFrames video composition from a brief/script autonomously. Uses separated builder and critic subagents — builders never review their own work. Quality decisions are grounded in project context (identity, audience, goals) and established visual/motion design principles. Measurable criteria (text size, contrast, overflow) are verified with tooling, not visual judgment. Use when the user says "make this video", "implement this brief", "build this composition", or provides a video script/brief to implement.
日本語の概要は準備中です。原文の説明を表示しています。
Systematically explore and test any software project (CLI, API, Backend, Library, etc.) to find bugs, usability issues, and edge cases. Produces a structured report with full reproduction evidence (exact commands, inputs, logs, and tracebacks) for every issue.
日本語の概要は準備中です。原文の説明を表示しています。
Firmware development for the 36-pin ESP32-WROOM-32 development board — the original DOIT ESP32 DevKit V1 with 18 pins per side, i.e. the 30-pin layout plus the six in-package flash pins (SD0 SD1 SD2 SD3 CMD CLK = GPIO6-11) broken out at the USB end, CH340G or CP2102 bridge, AMS1117 LDO, user LED on GPIO2, GPIO0 not on the header. Use when working on a 36-pin ESP32 devkit (ESP32-D0WDQ6 / ESP32-D0WD-V3, ESP-WROOM-32 module), or when identifying which ESP32 board size you have: project setup, platformio.ini and sdkconfig for ESP-IDF or Arduino, pin mapping and which GPIOs are safe, the flash-pin trap, strapping pins, ADC1 vs ADC2 with Wi-Fi, SPI speed and IO_MUX pins, deep sleep and RTC wake pins, flashing, BOOT/EN recovery, brownouts, or debugging why something on the board does not work.
日本語の概要は準備中です。原文の説明を表示しています。
Firmware development for the 40-pin ESP32-S3-WROOM-1 camera board — the Freenove ESP32-S3-WROOM (FNK0085) and the AliExpress "ESP32-S3 CAM" / "ESP32-S3-WROOM N16R8 CAM" clones that copy its header: 20 pins a side, a 24-pin DVP camera FPC connector for an OV2640/OV3660, an on-board microSD slot on the SDMMC bus, a WS2812, two USB-C sockets (CH343 bridge and native USB), ESP32-S3-WROOM-1-N8R8 or N16R8 with 8 MB octal PSRAM. Use when working on this board or any ESP32-S3 DVP camera board: project setup, platformio.ini, the qio_opi PSRAM memory type, camera and SD_MMC pin maps, esp_camera_init failures, PSRAM not found, frame buffer allocation, SD card mount failures, which GPIOs are left once the camera is wired, strapping pins, ADC1/ADC2, flashing over the two USB ports, BOOT/RESET recovery, brownouts, or debugging why the camera, the card or the board does not work.
日本語の概要は準備中です。原文の説明を表示しています。
Firmware development for the ProMicro nRF52840 (V1940) — the nice!nano v2 compatible clone also sold as SuperMini nRF52840, nRF52840 Pro Micro or nRFMicro (nRF52840 QIAA, Cortex-M4F @ 64 MHz, 1 MB flash / 256 KB RAM, BLE 5 + 802.15.4, native USB, Adafruit UF2 bootloader with SoftDevice S140). Covers the PlatformIO + Adafruit nRF52 Arduino setup for a board that ships in neither, the vendored board definition and Pro Micro pin map, USB CDC via TinyUSB, Bluefruit BLE, the 32.768 kHz crystal that clones omit, SAADC pins, NFC pins as GPIO, and Zephyr's promicro_nrf52840 board target. Use when working on this board or any nice!nano v2 / ZMK keyboard controller: project setup, platformio.ini, pin mapping, LED not blinking, double-tap RESET and UF2/DFU flashing, SoftDevice version mismatches, a board that enumerates but never runs, or debugging why something on the board does not work.
日本語の概要は準備中です。原文の説明を表示しています。
Firmware development for the Raspberry Pi Pico (original, RP2040 — dual Cortex-M0+ @ 133 MHz, 264 KB SRAM, 2 MB QSPI flash) — its 26 exposed GPIO, 4-channel 12-bit ADC, 16-channel PWM, 2× UART/I2C/SPI, PIO state machines, USB 1.1 CDC, VSYS/VBUS/SMPS power wiring, and the PlatformIO + arduino-pico (earlephilhower) setup around them. Use when working on this board, any Pico H or Pico clone, or a bare RP2040: project setup, platformio.ini, the earlephilhower-vs-Mbed core choice, pin mapping, USB CDC serial, analogRead/analogWrite behaviour, Wire/SPI defaults, battery power, EEPROM emulation, BOOTSEL/UF2 flashing, or debugging why something on the board does not work.
日本語の概要は準備中です。原文の説明を表示しています。
Firmware development for the Arduino Nano (A000005, ATmega328P @ 16 MHz, 5 V) — its 30 KB usable flash, 2 KB SRAM, 1 KB EEPROM, 8-channel 10-bit ADC, six 8-bit PWM pins across three timers, UART shared with the USB-serial chip, I2C on A4/A5, SPI on D10–D13, sleep modes, and the Arduino AVR core + PlatformIO setup around them. Use when working on this board or any ATmega328P Nano clone (FTDI or CH340 USB): project setup, platformio.ini, old-vs-new bootloader uploads, pin mapping, A6/A7 restrictions, timer/Servo/tone conflicts, the 2 KB SRAM budget, analog references, powering from VIN, ICSP recovery, or debugging why something on the board does not work.
日本語の概要は準備中です。原文の説明を表示しています。
Firmware development for the WeAct Studio MiniSTM32H7xx core board (STM32H750VBT6) — its 0.96" ST7735 TFT, DVP camera, QSPI/SPI flash, MicroSD, USB, and the STM32Cube HAL + PlatformIO setup around them. Use when working on this board or any STM32H750/H743 WeAct core board: project setup, platformio.ini, clock/PLL configuration, pin mapping, peripheral bring-up, LCD performance, D-cache/DMA problems, DFU flashing, or debugging why something on the board does not work.
日本語の概要は準備中です。原文の説明を表示しています。
Firmware development for the Waveshare ESP32-C6-LCD-1.47 board (ESP32-C6FH4, QFN32) — its 1.47" 172x320 ST7789 LCD, WS2812 RGB LED, microSD/TF slot, USB-Serial-JTAG console, Wi-Fi 6/BLE/802.15.4 radio, and the ESP-IDF + PlatformIO setup around them. Use when working on this board or the ESP32-C6-LCD-1.47-M variant (SKU 28563 / 30381, WS-28563): project setup, platformio.ini and sdkconfig, pin mapping and strapping pins, LCD or SD bring-up on the shared SPI bus, backlight brightness, display frame rate, flashing over Type-C, or debugging why something on the board does not work.
日本語の概要は準備中です。原文の説明を表示しています。
Firmware development for the <VENDOR> <BOARD NAME> (<MCU PART NUMBER>) — its <peripheral>, <peripheral>, <peripheral>, and the <SDK/HAL> + <build system> setup around them. Use when working on this board or any <compatible siblings>: project setup, <config file>, clock configuration, pin mapping, peripheral bring-up, <the board's headline concern>, flashing, or debugging why something on the board does not work.
日本語の概要は準備中です。原文の説明を表示しています。