「any」の検索結果

Assess the current codebase against the feature's spec, plan, and tasks, then append any remaining unbuilt work as new tasks to tasks.md so implement can complete it.

日本語の概要は準備中です。原文の説明を表示しています。

Stress-tests a fuzzy or vague feature idea before any PRD, spec, or ticket is written. TRIGGER when: the user has a fuzzy feature idea — one or two paragraphs, vague on users / scope / success — and wants to harden it, or says "grill / stress-test / pressure-test this idea." DO NOT TRIGGER when: the idea is already turned into a spec or PRD; bug fixes or refactors; the idea is hardened and you are ready to write the PRD → creating-prd.

日本語の概要は準備中です。原文の説明を表示しています。

Search LCSC Electronics for electronic components — find parts by LCSC number (Cxxxxx) or MPN, check stock/pricing, download datasheets, analyze specifications. Sister company to JLCPCB, same parts library. Sync and maintain a local datasheets directory for a KiCad project. No API key needed — uses the free jlcsearch community API. Use this skill when the user mentions LCSC, JLCPCB parts library, JLCPCB assembly parts, production sourcing, Cxxxxx part numbers, needs to find LCSC equivalents for parts, is preparing a BOM for JLCPCB assembly, or wants to download datasheets and LCSC is available. For package cross-reference tables and BOM workflow, see the `bom` skill.

日本語の概要は準備中です。原文の説明を表示しています。

Cross-reference design audit -- validates consistency across spec, schematics, BOM, pin maps, and PCB layout. Catches disagreements before fabrication. Run after any significant design change.

日本語の概要は準備中です。原文の説明を表示しています。

Xilinx/AMD Vivado FPGA build workflow -- batch-mode TCL scripting, ADI HDL reference design integration, Zynq-7000/MPSoC block design, IP builds, synthesis, implementation, and bitstream generation. Use for any Zynq or UltraScale+ design that incorporates ADI transceivers or follows the ADI HDL reference design pattern.

日本語の概要は準備中です。原文の説明を表示しています。

Bulletproof agent operating protocol. 15 failure-prevention rules distilled from 120+ real sessions and 10 agent definitions. Covers fabrication, constraint tracking, verification, scoping, retry discipline, and communication. Load before any task to prevent the most common agent failure modes.

日本語の概要は準備中です。原文の説明を表示しています。

How to use the coding agents installed on this machine (claude, codex, droid, grok, vktr, hermes, opencode, copilot, pi) as plain sub-agents in orchestrated workflows: one headless invocation, one prompt in, one result out. Deliberately ignores each CLI's own orchestration features (droid --mission, codex multi_agent, hermes delegation/moa/kanban, grok --agents, opencode personas). The orchestrator is whatever session is running the skill; the CLIs are interchangeable workers. Use when the user asks "which agent should run this", "fan out workers", "run X headless", or when a lifeos skill (overnight, timeboxed-iterating, workgraph, gauntlet, bughunt, dark-factory) needs to launch an agent CLI, or when a worker needs company context it should ask Viktor for (vktr).

日本語の概要は準備中です。原文の説明を表示しています。

Systematically explore and test any software project (CLI, API, Backend, Library, etc.) to find bugs, usability issues, and edge cases. Produces a structured report with full reproduction evidence (exact commands, inputs, logs, and tracebacks) for every issue.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the <VENDOR> <BOARD NAME> (<MCU PART NUMBER>) — its <peripheral>, <peripheral>, <peripheral>, and the <SDK/HAL> + <build system> setup around them. Use when working on this board or any <compatible siblings>: project setup, <config file>, clock configuration, pin mapping, peripheral bring-up, <the board's headline concern>, flashing, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the ProMicro nRF52840 (V1940) — the nice!nano v2 compatible clone also sold as SuperMini nRF52840, nRF52840 Pro Micro or nRFMicro (nRF52840 QIAA, Cortex-M4F @ 64 MHz, 1 MB flash / 256 KB RAM, BLE 5 + 802.15.4, native USB, Adafruit UF2 bootloader with SoftDevice S140). Covers the PlatformIO + Adafruit nRF52 Arduino setup for a board that ships in neither, the vendored board definition and Pro Micro pin map, USB CDC via TinyUSB, Bluefruit BLE, the 32.768 kHz crystal that clones omit, SAADC pins, NFC pins as GPIO, and Zephyr's promicro_nrf52840 board target. Use when working on this board or any nice!nano v2 / ZMK keyboard controller: project setup, platformio.ini, pin mapping, LED not blinking, double-tap RESET and UF2/DFU flashing, SoftDevice version mismatches, a board that enumerates but never runs, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the LGT8F328P-LQFP32 MiniEVB — the Nano-style 30-pin "purple nano" board whose silkscreen reads LGTBF32BP (also sold as BTE21-15A, WAVGAT, LGT8F328P Nano V3.0), built on the Logic Green / Prodesign LGT8F328P, an AVR-instruction-compatible LGT8XM part with a 32 MHz internal RC and no crystal, a 12-bit ADC, an 8-bit DAC on D4, four timers, 80 mA drive pins, SWD instead of ICSP, and EEPROM emulated in program flash. Use when working on this board, any LGT8F328P/LGT8F328D/LGT8FX8P board, or a sketch being ported from an Arduino Nano or ATmega328P: PlatformIO setup with the lgt8fx core, platformio.ini, f_cpu/f_osc/clock_source and why timings come out 2x wrong, pin mapping and the LQFP32 bonded pads, analogRead resolution and reference errors, analogWrite hitting the DAC, EEPROM vanishing after upload, 80 mA outputs, upload failures over CH340/CH9340/HT42B534, SWD recovery, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the Raspberry Pi Pico (original, RP2040 — dual Cortex-M0+ @ 133 MHz, 264 KB SRAM, 2 MB QSPI flash) — its 26 exposed GPIO, 4-channel 12-bit ADC, 16-channel PWM, 2× UART/I2C/SPI, PIO state machines, USB 1.1 CDC, VSYS/VBUS/SMPS power wiring, and the PlatformIO + arduino-pico (earlephilhower) setup around them. Use when working on this board, any Pico H or Pico clone, or a bare RP2040: project setup, platformio.ini, the earlephilhower-vs-Mbed core choice, pin mapping, USB CDC serial, analogRead/analogWrite behaviour, Wire/SPI defaults, battery power, EEPROM emulation, BOOTSEL/UF2 flashing, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the WeAct Studio MiniSTM32H7xx core board (STM32H750VBT6) — its 0.96" ST7735 TFT, DVP camera, QSPI/SPI flash, MicroSD, USB, and the STM32Cube HAL + PlatformIO setup around them. Use when working on this board or any STM32H750/H743 WeAct core board: project setup, platformio.ini, clock/PLL configuration, pin mapping, peripheral bring-up, LCD performance, D-cache/DMA problems, DFU flashing, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the Arduino Nano (A000005, ATmega328P @ 16 MHz, 5 V) — its 30 KB usable flash, 2 KB SRAM, 1 KB EEPROM, 8-channel 10-bit ADC, six 8-bit PWM pins across three timers, UART shared with the USB-serial chip, I2C on A4/A5, SPI on D10–D13, sleep modes, and the Arduino AVR core + PlatformIO setup around them. Use when working on this board or any ATmega328P Nano clone (FTDI or CH340 USB): project setup, platformio.ini, old-vs-new bootloader uploads, pin mapping, A6/A7 restrictions, timer/Servo/tone conflicts, the 2 KB SRAM budget, analog references, powering from VIN, ICSP recovery, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the WeAct Studio "Black Pill" (STM32F411CEU6) and its clones such as the DFRobot DFR0864 — the 25 MHz HSE and 32.768 kHz LSE crystals, PC13 LED, K1 button, USB-C wired straight to USB_OTG_FS, ROM DFU flashing, the SPI-flash footprint, and the STM32Cube HAL + PlatformIO setup around them. Use when working on this board or any STM32F411CE/F401CC Black Pill: project setup, platformio.ini, clock and PLL configuration for 96 MHz plus 48 MHz USB, pin mapping on the 48-pin package, USB CDC console, RTC on the LSE crystal, the internal temperature sensor, ADC accuracy, DFU flashing and recovery, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the 40-pin ESP32-S3-WROOM-1 camera board — the Freenove ESP32-S3-WROOM (FNK0085) and the AliExpress "ESP32-S3 CAM" / "ESP32-S3-WROOM N16R8 CAM" clones that copy its header: 20 pins a side, a 24-pin DVP camera FPC connector for an OV2640/OV3660, an on-board microSD slot on the SDMMC bus, a WS2812, two USB-C sockets (CH343 bridge and native USB), ESP32-S3-WROOM-1-N8R8 or N16R8 with 8 MB octal PSRAM. Use when working on this board or any ESP32-S3 DVP camera board: project setup, platformio.ini, the qio_opi PSRAM memory type, camera and SD_MMC pin maps, esp_camera_init failures, PSRAM not found, frame buffer allocation, SD card mount failures, which GPIOs are left once the camera is wired, strapping pins, ADC1/ADC2, flashing over the two USB ports, BOOT/RESET recovery, brownouts, or debugging why the camera, the card or the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Разработка прошивок для BE-U1000 (Baikal Electronics / Байкал Электроникс, три ядра RISC-V: BR-350 и BM-310) на отладочных платах EVU-BA-2.1, EVU-BA-2.0 и EVU-BA-1.2 — её eFlash и QSPI flash, UART0/BootROM CLI, PWMA (захват и импульсы), АЦП с DMA, CAN FD, SPI, WDT, CLIC, а также SDK Байкала и его система сборки на make. Use when working on this board or any BE-U1000 / BMCU_U project (SDK 2.1/2.3, riscv32-none-elf, dfu-util, OpenOCD): настройка проекта, Makefile и MEM_REG_ROM, карта выводов и разъёмы XP1/XP8/XP9/XP10, режимы начальной загрузки и страповые выводы, прошивка по UART XMODEM либо USB DFU, работа с eFlash и TCM, прерывания и CLIC, отладка по JTAG — и разбор, почему плата молчит, не стартует, зависает или почему периферия «настроилась», а обмена нет.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the WeAct Studio RP2350A Core Board (RP2350A — dual Cortex-M33 @ 150 MHz, 520 KB SRAM, 4 MB or 16 MB QSPI flash) in both of its revisions, RP2350A_V10 and RP2350A_V20 — the 40-pin Pico-2-shaped header, 3-or-4-channel 12-bit ADC, PWM, PIO, USB-C CDC, the V1.0 LDO vs V2.0 buck-boost power wiring, and the PlatformIO + arduino-pico (earlephilhower) setup around them. Use when working on this board, a WeAct RP2350 core board of unknown revision, or any Raspberry Pi Pico 2 / RP2350A clone: project setup, platformio.ini, board = rpipico2 vs weact_rp2350b, telling V1.0 and V2.0 apart, pin mapping, LED and KEY pins, powering it from a battery, 4 MB vs 16 MB flash, erratum RP2350-E9 pull-down trouble, BOOT/RESET UF2 flashing, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the Beetle — the CJMCU / DFRobot "Mini Arduino Leonardo" USB board (ATmega32U4 @ 16 MHz, 5 V, 21×28 mm, castellated pads) — its native USB (CDC serial + HID keyboard/mouse/joystick), Caterina bootloader and 1200 bps touch upload, ten exposed I/O pads, four PWM pins across Timer0/Timer1, five ADC channels, I2C on D2/D3, SPI on the back-side ICSP pads, 28 KB usable flash and 2.5 KB SRAM, and the PlatformIO + Arduino AVR core (`board = leonardo`) setup around them. Use when working on this board or any ATmega32U4 Leonardo/Micro/Pro-Micro-class clone: project setup, platformio.ini, why the board shows up as two different serial ports, uploads that fail or hang, recovering a bricked or HID-spamming board by shorting the ICSP reset pads, pin mapping and which pads are missing, PWM/timer conflicts, Servo and tone, USB HID keyboard projects, the SRAM budget, powering from the + pad, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Observes runtime behavior of binaries via QEMU emulation, GDB debugging, and Frida hooking — syscall tracing, breakpoints, memory inspection, and function interception. Use when running, tracing, or debugging a binary, verifying hypotheses from static analysis, or watching actual syscalls, network calls, or file access; requires human approval before any execution.

日本語の概要は準備中です。原文の説明を表示しています。

Thorough, consistently formatted competitor and product research. Produces a structured "About" doc, a "Recent News" log, and a row in a tracking spreadsheet. Use whenever the user researches a company or competitor, builds or updates a competitor doc, compares products, or logs a competitor to the tracker.

日本語の概要は準備中です。原文の説明を表示しています。

Check that the scheduled data work behind the reports actually ran and produced something sensible: the daily reshaping scripts, the API pulls, the tables the reports read from. Use each morning before anyone opens a report, when a report looks wrong and nobody knows whether it is the data or the query, after a schema or API change, when a new audience or source is added to the pipeline, or when a scheduled job failed or finished suspiciously fast.

日本語の概要は準備中です。原文の説明を表示しています。

Full quality pass -- chains parallel UX + scalability audit, then QA verification, then consistency gate. Fixes everything it finds. Works with any stack.

日本語の概要は準備中です。原文の説明を表示しています。

Build and ship features with security baked in — runs OWASP Top 10 pre-scan, builds and ships with /ship, validates with post-build security review, then penetration tests the result. Use when shipping auth flows, payment logic, API endpoints, admin panels, or any security-sensitive code.

日本語の概要は準備中です。原文の説明を表示しています。