「firmware」の検索結果

Provides reverse engineering techniques. Use when the main job is to understand how a compiled, obfuscated, packed, or virtualized target works before exploiting or solving it, including binaries, APKs, WASM, firmware, custom VMs, bytecode, malware-like loaders, and anti-debug or anti-analysis logic. Do not use it when the vulnerability is already understood and the remaining task is exploitation; use pwn instead. Do not use it for pure web workflows, log or disk forensics, or standalone crypto problems unless reversing the implementation is the real blocker.

日本語の概要は準備中です。原文の説明を表示しています。

Bench instruments and measurement techniques for electronics — digital multimeter, oscilloscope, logic analyzer, spectrum analyzer, function generator, power supply, and their proper use. Covers probing technique, ground loops, loading effects, trigger modes, FFT mode pitfalls, signal integrity, noise budget analysis, and debugging workflows from "it doesn't work" to "here is the failure mechanism." Use when measuring, debugging, or characterizing any electronic circuit or firmware-hardware interaction.

日本語の概要は準備中です。原文の説明を表示しています。

Zephyr RTOS development — boards and devicetree, the build system (west, Kconfig, CMake, sysbuild), drivers and peripherals, BLE and networking, the kernel, storage, power, testing and debugging, security and OTA. Use this for ANY Zephyr RTOS or embedded-firmware task on a Zephyr project; it routes you to the right specialized skill via the zephyr-cli registry.

日本語の概要は準備中です。原文の説明を表示しています。

Secure boot and firmware update workflows for Zephyr RTOS. Covers MCUboot integration, production image signing, DFU protocols (MCUmgr), fail-safe rollback mechanisms, and mbedTLS crypto basics. Trigger when implementing over-the-air (OTA) updates, securing the boot process, or managing cryptographic keys.

日本語の概要は準備中です。原文の説明を表示しています。

Automate on-target verification of a program's logic by driving its RTT console with rttsh - write Lua scripts that exercise commands and assert responses, output and timing on real hardware. Use when asked to verify target-side behavior on board, build board-level checks for firmware features, or automate hardware test runs.

日本語の概要は準備中です。原文の説明を表示しています。

Provides reverse engineering techniques. Use when the main job is to understand how a compiled, obfuscated, packed, or virtualized target works before exploiting or solving it, including binaries, APKs, WASM, firmware, custom VMs, bytecode, game clients, malware-like loaders, and anti-debug or anti-analysis logic. Do not use it when the vulnerability is already understood and the remaining task is exploitation; use pwn instead. Do not use it for pure web workflows, log or disk forensics, or standalone crypto problems unless reversing the implementation is the real blocker.

日本語の概要は準備中です。原文の説明を表示しています。

IDA Pro 逆向分析辅助技能。当用户提到逆向、反编译、分析二进制/PE/ELF/APK/DLL/SO、破解、找密码、漏洞分析、病毒分析、firmware 固件分析，或需要分析 exe/dll/so/elf/macho/sys 等文件时，务必使用此技能。 Ensure to use this skill when the user wants to analyze any binary file, regardless of whether they explicitly mention "IDA" or "reverse engineering". This includes requests like "看看这个exe", "分析这个dll", "帮我破解", "找一下密码", "这个软件怎么注册", etc. Use the bundled scripts (scripts/start.ps1, scripts/open.ps1) for deterministic server management and file opening — do NOT write ad-hoc PowerShell commands for these operations.

日本語の概要は準備中です。原文の説明を表示しています。

Internal downstream skill for ctf-sandbox-orchestrator. CTF-sandbox workflow for reverse engineering, malware, DFIR, firmware, pwnable, and native exploit challenges. Use when the user asks to reverse a binary, unpack a sample, inspect a memory dump or PCAP, recover malware behavior, debug a crash, or build or verify an exploit chain under sandbox assumptions. Use only after `$ctf-sandbox-orchestrator` has already established sandbox assumptions and routed here.

日本語の概要は準備中です。原文の説明を表示しています。

Use for every hardware bring-up or debug session that ports mainline Linux to a phone or tablet. Retail-unlock targets require an already-unlocked bootloader; locked retail bootloaders are out of scope. Exploit-booted and firmware-booted targets require a demonstrated boot path; the skill never provides unlock or exploit steps.

日本語の概要は準備中です。原文の説明を表示しています。

Use when writing no_std Cortex-M or RISC-V firmware in Rust with cortex-m-rt, probe-rs, defmt, RTIC, or a panic handler. Not for no_std library constraints: use rust-no-std.

日本語の概要は準備中です。原文の説明を表示しています。

Use when writing a custom bootloader, jumping to application code, relocating VTOR, or implementing DFU/USB firmware update on Cortex-M. Not for reset-to-main: use baremetal-startup.

日本語の概要は準備中です。原文の説明を表示しています。

Use whenever the user mentions Betaflight, FPV drone firmware, flight-controller config, PID/filter/rates tuning, or blackbox log analysis — or shares a Betaflight artifact: a CLI diff/dump (lines like 'diff all', 'set ', 'feature ', 'resource ') or a .bbl/.bfl blackbox log, even when not named as such — or runs a chirp tuning session via Sweep Studio / FPVLogForge (a chirp log ID to analyse, 'analyse log', 'résultat chirp', iterative Bode/step/Ms tuning). Covers flight symptoms (oscillations, wobble, propwash, jello, hot motors, drift), motor/ESC and RX/ELRS/CRSF setup, builds from 3" to 10" (cinewhoop, tinywhoop, longrange, X-class), version migrations (4.4 → 4.5 → 4.6), and configuring a new drone from scratch (setup wizard). Trigger even when phrased casually ("mon drone wobble", "PID help", "config FC") — under-triggering is worse than over-triggering.

日本語の概要は準備中です。原文の説明を表示しています。

Analyzes bootkit and rootkit samples by identifying boot-process tampering (MBR/VBR/ UEFI), kernel-mode components, and stealth hooking techniques from static indicators. Activates for requests to analyze a bootkit or rootkit, examine MBR/UEFI tampering, or identify kernel-mode stealth components.

日本語の概要は準備中です。原文の説明を表示しています。

Fingerprints unknown binaries using rabin2 — detects architecture (ARM, x86, MIPS), ABI, libc, dependencies, and strings of interest. Use when first encountering an unknown binary, ELF file, or firmware blob, or when you need architecture or ABI information before committing to deeper analysis.

日本語の概要は準備中です。原文の説明を表示しています。

Analyzes ELF binaries, executables, and firmware images to understand behavior without source code; coordinates sub-skills binary-re:triage, binary-re:static-analysis, binary-re:dynamic-analysis, binary-re:synthesis, and binary-re:tool-setup. Use when working with a binary, executable, or ELF file; asked to reverse engineer, disassemble, decompile, or figure out what something does; targeting ARM64, ARMv7, x86_64, or MIPS; or analyzing Python bytecode (.pyc, marshal). For Python bytecode analysis, see docs/python-bytecode-re.md.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the LGT8F328P-LQFP32 MiniEVB — the Nano-style 30-pin "purple nano" board whose silkscreen reads LGTBF32BP (also sold as BTE21-15A, WAVGAT, LGT8F328P Nano V3.0), built on the Logic Green / Prodesign LGT8F328P, an AVR-instruction-compatible LGT8XM part with a 32 MHz internal RC and no crystal, a 12-bit ADC, an 8-bit DAC on D4, four timers, 80 mA drive pins, SWD instead of ICSP, and EEPROM emulated in program flash. Use when working on this board, any LGT8F328P/LGT8F328D/LGT8FX8P board, or a sketch being ported from an Arduino Nano or ATmega328P: PlatformIO setup with the lgt8fx core, platformio.ini, f_cpu/f_osc/clock_source and why timings come out 2x wrong, pin mapping and the LQFP32 bonded pads, analogRead resolution and reference errors, analogWrite hitting the DAC, EEPROM vanishing after upload, 80 mA outputs, upload failures over CH340/CH9340/HT42B534, SWD recovery, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the ProMicro nRF52840 (V1940) — the nice!nano v2 compatible clone also sold as SuperMini nRF52840, nRF52840 Pro Micro or nRFMicro (nRF52840 QIAA, Cortex-M4F @ 64 MHz, 1 MB flash / 256 KB RAM, BLE 5 + 802.15.4, native USB, Adafruit UF2 bootloader with SoftDevice S140). Covers the PlatformIO + Adafruit nRF52 Arduino setup for a board that ships in neither, the vendored board definition and Pro Micro pin map, USB CDC via TinyUSB, Bluefruit BLE, the 32.768 kHz crystal that clones omit, SAADC pins, NFC pins as GPIO, and Zephyr's promicro_nrf52840 board target. Use when working on this board or any nice!nano v2 / ZMK keyboard controller: project setup, platformio.ini, pin mapping, LED not blinking, double-tap RESET and UF2/DFU flashing, SoftDevice version mismatches, a board that enumerates but never runs, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the 30-pin NodeMCU ESP8266 devkit — NodeMCU DevKit V1.0 / Amica (CP2102) and LoLin NodeMCU V3 (CH340G), built on the Ai-Thinker ESP-12E or ESP-12F module (ESP8266EX, 4 MB flash), with PlatformIO and the Arduino ESP8266 core (`board = nodemcuv2`). Use when working on a NodeMCU, ESP-12E, ESP-12F or ESP8266 devkit: project setup, platformio.ini, the D0-D10 vs GPIO numbering, which pins are safe and which break the boot, GPIO15/GPIO0/GPIO2 strapping, the A0 divider and 1 V ADC, software I2C and software PWM, analogWrite range, LittleFS and flash layouts, OTA, deep sleep and the missing GPIO16-to-RST link, Wi-Fi, heap exhaustion, watchdog and Soft WDT resets, exception decoding, flashing over CP2102/CH340, or debugging why the board does not boot, prints garbage, or reboots by itself.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the WeAct Studio RP2350A Core Board (RP2350A — dual Cortex-M33 @ 150 MHz, 520 KB SRAM, 4 MB or 16 MB QSPI flash) in both of its revisions, RP2350A_V10 and RP2350A_V20 — the 40-pin Pico-2-shaped header, 3-or-4-channel 12-bit ADC, PWM, PIO, USB-C CDC, the V1.0 LDO vs V2.0 buck-boost power wiring, and the PlatformIO + arduino-pico (earlephilhower) setup around them. Use when working on this board, a WeAct RP2350 core board of unknown revision, or any Raspberry Pi Pico 2 / RP2350A clone: project setup, platformio.ini, board = rpipico2 vs weact_rp2350b, telling V1.0 and V2.0 apart, pin mapping, LED and KEY pins, powering it from a battery, 4 MB vs 16 MB flash, erratum RP2350-E9 pull-down trouble, BOOT/RESET UF2 flashing, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the 38-pin ESP32-WROOM-32 development board — Espressif ESP32-DevKitC V4, Ai-Thinker NodeMCU-32S, DOIT ESP32 DevKit V1 38-pin and their CH340/CP2102 clones, 19 pins per side, with GPIO0 and the six in-package flash pins (GPIO6-11, labelled D0 D1 D2 D3 CMD CLK or SD0-SD3) broken out. Use when working on a 38-pin ESP32 devkit (ESP32-D0WDQ6 / ESP32-D0WD-V3, ESP-WROOM-32 or ESP32-WROVER module): project setup, platformio.ini and sdkconfig for ESP-IDF or Arduino, pin mapping and which GPIOs are safe, the flash-pin and IO0 traps, WROVER GPIO16/17 PSRAM conflict, strapping pins, ADC1 vs ADC2 with Wi-Fi, SPI speed and IO_MUX pins, deep sleep and RTC wake pins, flashing, BOOT/EN recovery, brownouts, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the WeAct Studio "Black Pill" (STM32F411CEU6) and its clones such as the DFRobot DFR0864 — the 25 MHz HSE and 32.768 kHz LSE crystals, PC13 LED, K1 button, USB-C wired straight to USB_OTG_FS, ROM DFU flashing, the SPI-flash footprint, and the STM32Cube HAL + PlatformIO setup around them. Use when working on this board or any STM32F411CE/F401CC Black Pill: project setup, platformio.ini, clock and PLL configuration for 96 MHz plus 48 MHz USB, pin mapping on the 48-pin package, USB CDC console, RTC on the LSE crystal, the internal temperature sensor, ADC accuracy, DFU flashing and recovery, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the 36-pin ESP32-WROOM-32 development board — the original DOIT ESP32 DevKit V1 with 18 pins per side, i.e. the 30-pin layout plus the six in-package flash pins (SD0 SD1 SD2 SD3 CMD CLK = GPIO6-11) broken out at the USB end, CH340G or CP2102 bridge, AMS1117 LDO, user LED on GPIO2, GPIO0 not on the header. Use when working on a 36-pin ESP32 devkit (ESP32-D0WDQ6 / ESP32-D0WD-V3, ESP-WROOM-32 module), or when identifying which ESP32 board size you have: project setup, platformio.ini and sdkconfig for ESP-IDF or Arduino, pin mapping and which GPIOs are safe, the flash-pin trap, strapping pins, ADC1 vs ADC2 with Wi-Fi, SPI speed and IO_MUX pins, deep sleep and RTC wake pins, flashing, BOOT/EN recovery, brownouts, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the WeAct Studio MiniSTM32H7xx core board (STM32H750VBT6) — its 0.96" ST7735 TFT, DVP camera, QSPI/SPI flash, MicroSD, USB, and the STM32Cube HAL + PlatformIO setup around them. Use when working on this board or any STM32H750/H743 WeAct core board: project setup, platformio.ini, clock/PLL configuration, pin mapping, peripheral bring-up, LCD performance, D-cache/DMA problems, DFU flashing, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。

Firmware development for the <VENDOR> <BOARD NAME> (<MCU PART NUMBER>) — its <peripheral>, <peripheral>, <peripheral>, and the <SDK/HAL> + <build system> setup around them. Use when working on this board or any <compatible siblings>: project setup, <config file>, clock configuration, pin mapping, peripheral bring-up, <the board's headline concern>, flashing, or debugging why something on the board does not work.

日本語の概要は準備中です。原文の説明を表示しています。