本文へ移動
cccskills
無料GitHub で公開

SuggestSkills

Discover WHICH new skills you should create, from your own work history plus your satisfaction/frustration signals. Read-only and proposal-only: it surfaces recurring pain that no existing skill, loop, or workflow covers, then hands you a ranked shortlist to build with CreateSkill. It never creates or edits a skill itself. Frustration is a first-class signal (a topic can look 'covered' while you keep hitting the same wall inside it), so it reads low ratings and recurrence markers, not just session topics. USE WHEN should I create a skill, what skills do I need, suggest skills, skill gap, based on my recent work, am I missing a skill, what should I build. NOT FOR creating/validating/testing/optimizing an individual skill (use CreateSkill) — this only decides WHAT to build, not how.

インストール方法を見る

含まれるファイル(3)

  • SKILL.md6.1 KB
  • Tools/CollectSignals.ts12.1 KB
  • Workflows/Scan.md4.3 KB

SKILL.md(原文)

インストールする前に、エージェントに与えられる指示の中身を確認できます。

SuggestSkills — what should I build next?

A read-only analytics pass over your own work. It answers one question: given what you have actually been doing and where you have been frustrated, is there a recurring problem that deserves its own skill and does not have one yet? It proposes; you decide; CreateSkill builds. It has no capability to create or edit a skill, by design.

Customization

Before executing, check for user customizations at: ~/.claude/LIFEOS/USER/CUSTOMIZATIONS/SKILLS/SuggestSkills/

If this directory exists, load and apply any PREFERENCES.md found there (default window, store paths, review location). If not, proceed with defaults.

Voice Notification

When executing a workflow, do BOTH:

  1. Send voice notification:

    curl -s -X POST http://localhost:31337/notify \
      -H "Content-Type: application/json" \
      -d '{"message": "Running WORKFLOWNAME in SuggestSkills"}' \
      > /dev/null 2>&1 &
    
  2. Output text notification:

    Running **WorkflowName** in **SuggestSkills**...
    

Workflow Routing

WorkflowTriggerFile
Scan"what skills should I build", "skill gap", "suggest skills", "am I missing a skill"Workflows/Scan.md

In short, Scan is:

  1. Gather deterministically. Run Tools/CollectSignals.ts to emit a normalized corpus (recent sessions, low-rating frustrations with sentiment, and the skill/loop/workflow registry for dedup, plus warnings for any missing or malformed store). The LLM does not gather; it only judges what the tool returns, so two runs see the same evidence.
  2. Cluster by pain. Group the corpus into recurring themes, carrying both how often each recurs AND how much frustration it drew.
  3. Dedup against real coverage. For each candidate, read the bodies of the skills/loops/workflows that might cover it. Name-match is not coverage; the covering unit must actually address the failure class.
  4. Verify with two independent passes, report the UNION. Do not require both passes to agree before surfacing a gap (strict intersection suppresses exactly the subtle discipline gaps this exists to find). Report every gap either pass flags, tagged with its agreement level (both = high confidence, one = needs review).
  5. Propose, never create. Emit a ranked shortlist with evidence (session count, frustration count, the specific recurring failure). Route accepted proposals to CreateSkill. Redact secrets, client names, and personal paths from anything written out.

Why it is separate from CreateSkill

Discovery is read-only; creation mutates. Keeping the two apart is the permission boundary that makes "never auto-create" real rather than a promise in prose: this skill cannot write a skill even if asked.

The two blind spots it exists to defeat

  1. Frustration is invisible to topic-matching. A topic can be nominally covered by a build/test skill while you keep hitting the same wall inside it. Low ratings and "regressed again" recurrence are the strongest signal a skill is missing. Weight them above raw topic frequency.
  2. Discipline gaps hide under covered topics. "App development" maps to a build skill, but the recurring pain may be an unowned discipline (state modeling, error handling, migration safety) that the build skill never addresses. Coverage means the discipline is genuinely handled, not that the topic shares a keyword.

Examples

Example 1: routine gap scan

User: "What skills should I build based on my recent work?"
→ Invokes Scan workflow
→ Runs Tools/CollectSignals.ts over the last 45 days
→ Clusters sessions + low ratings, dedups against existing skills/workflows
→ Returns a ranked shortlist with evidence per proposal; nothing is created

Example 2: frustration-led scan

User: "I keep hitting the same wall — am I missing a skill?"
→ Invokes Scan workflow with the frustration store as the lead signal
→ Surfaces discipline gaps hiding under topics that look covered
→ User accepts one proposal → handed to CreateSkill as a separate step

Gotchas

  • A clean topic-coverage result with dirty frustration signals is a FALSE negative. If the ratings show recurring frustration in an area you marked covered, re-open it — the discipline under that topic is the gap. (This is the exact failure this skill was built to fix.)
  • Recurrence is severity-weighted, not a bare count. Three trivial sessions matter less than one long, painful, repeated migration. A high-severity pain that recurs across a few sessions qualifies even below an arbitrary threshold.
  • Behavior is not a skill. "Too verbose", "misread scope", "repeated a reminder" are steering/feedback, not skill gaps. Separate them out and route them to memory/preferences, not to CreateSkill.
  • Gathering is deterministic on purpose. If you find yourself grepping stores by hand in the workflow, use the tool instead — hand-gathering makes runs non-reproducible and the eval meaningless.
  • Paths are discovered, not assumed. The tool resolves stores via flags/env/root, so it works across installs; do not hardcode a home directory.
  • A large work store makes the session list long, not the analysis better. The default 45-day window is the lever — widen it deliberately, and expect the cluster step to carry the cost.

レビュー

まだレビューはありません。使ってみた感想をお寄せください。

同じリポジトリのスキル

概要と使いどころ

3-pass scope oscillation that holds a question constant while shifting zoom — narrow/tactical, wide/strategic, then synthesis — to surface design tensions, scope recommendations, and coherence assessments invisible at any single zoom level. USE WHEN aperture oscillation, oscillate scope, zoom in and out, tactical vs strategic, scope framing, design tension, system coherence check, local vs global design, wrong scope, scope negotiation. NOT FOR lens rotation across angles (use IterativeDepth).

日本語の概要は準備中です。原文の説明を表示しています。

danielmiessler/LifeOS1.9万2026年9月4日 更新

Aphorisms

無料

Curated aphorism collection with CRUD — content-based matching, themed search, thinker research, DB maintenance. Quotes organized by author/theme/context/usage to prevent repetition. Four workflows: FindAphorism, AddAphorism, ResearchThinker, SearchAphorisms. Themes: Stoicism, Wisdom, Truth-seeking, Excellence, Resilience, Curiosity. USE WHEN aphorism, quote, find a quote, research thinker, add aphorism, quote for newsletter, what did X say about, quote bank. NOT FOR creative writing or social posts.

日本語の概要は準備中です。原文の説明を表示しています。

danielmiessler/LifeOS1.9万2026年9月4日 更新

Apify

無料

Scrapes social platforms, business data, and e-commerce via Apify actors — Instagram, LinkedIn, TikTok, YouTube, Facebook, Google Maps, Amazon, and web crawls — filtering in code. USE WHEN scrape Instagram, scrape LinkedIn, scrape TikTok, scrape YouTube, scrape Facebook, Google Maps leads, Amazon reviews, business intelligence, multi-platform social listening, competitive analysis, lead generation, social monitoring, Apify actors, web crawl, extract contacts. NOT FOR X/Twitter account operations like posting, threads, or bookmarks (those need a dedicated X API client), 4-tier progressive scraping with proxy escalation (use BrightData), or real-Chrome bot bypass and computer use (use Interceptor).

日本語の概要は準備中です。原文の説明を表示しています。

danielmiessler/LifeOS1.9万2026年9月4日 更新

Art

無料

Static visual content across 20+ formats — diagrams, mermaid, infographics, D3 dashboards, comics, icons, wallpaper — via Nano Banana Pro (default), Nano Banana, and Flux. USE WHEN art, illustration, diagram, flowchart, infographic, header image, blog social thumbnail, visualize, generate image, mermaid, architecture diagram, comic, icon, blog art, framework diagram, D3 chart, remove background, wallpaper. NOT FOR locked house-style YouTube/channel/video thumbnails, video or animation (use Remotion), or web UI design and integrated frontend layout (use Webdesign).

日本語の概要は準備中です。原文の説明を表示しています。

danielmiessler/LifeOS1.9万2026年9月4日 更新

ArXiv

無料

Search and retrieve arXiv academic papers by topic, category, or paper ID — with AlphaXiv-enriched AI-generated overviews. Uses arXiv Atom API across cs.AI/cs.LG/cs.CL/cs.CR/cs.MA/cs.SE/cs.IR. Three workflows: Latest, Search, Paper. USE WHEN arxiv, papers, latest papers, research papers, recent ML papers, paper lookup, summarize paper, latest LLM papers, AI safety papers, cs.AI latest. NOT FOR general research (Research), URL parsing, or annual reports.

日本語の概要は準備中です。原文の説明を表示しています。

danielmiessler/LifeOS1.9万2026年9月4日 更新

AI audio editing pipeline: Whisper word-level transcription → Claude segment classification (KEEP/CUT_FILLER/CUT_FALSE_START/CUT_STUTTER/CUT_DEAD_AIR) → ffmpeg with 40ms qsin crossfades and room-tone fill → optional Cleanvoice cloud polish; plus GateScan/GateRepair for noise-gate ticking artifacts. Modes: --preview, --aggressive, --polish. Workflow: Clean. USE WHEN clean audio, edit audio, remove filler words, clean podcast, remove ums, cut dead air, polish audio, trim recording, cut stutters, ticking audio, clicking audio, audio clicks, gate artifacts, popping audio. NOT FOR video composition (use Remotion).

日本語の概要は準備中です。原文の説明を表示しています。

danielmiessler/LifeOS1.9万2026年9月4日 更新

danielmiessler のスキルをすべて見る

このスキルの問題を報告する