MATLAB Development & AI Coding Projects

Statically analyze a Simulink model for Rapid Accelerator (raccel) mode incompatibilities. Identifies unsupported blocks (Interpreted MATLAB Function, Level-2 S-Functions without TLC), configuration issues, and data type restrictions that prevent code generation. Classifies each issue as BLOCKER (build error) or WARNING (build warning). Use BEFORE calling sim() in rapid-accelerator mode, when buildRapidAcceleratorTarget fails, or when the user asks "why won't my model run in raccel?" TRIGGER: any request explicitly involving rapid accelerator mode, raccel, raccel build errors, or buildRapidAcceleratorTarget failures.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Configure a Simulink model for Simulink Real-Time code generation and deployment. Use when setting up a model for Simulink Real-Time, selecting the correct system target file, fixing TLC/STF mismatches, applying fixed-step solver settings, validating target-platform compatibility, or configuring Simulink Real-Time build options before model build.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Use when SLCI code inspection has failed due to compatibility issues and you need to diagnose the incompatibilities. Traces inspection failures back to root-cause incompatibility settings or known limitations by matching failed code lines against known incorrect code generation patterns and documented limitation scenarios. Hands off to slci-compatibility-analysis for fixes. Trigger keywords: inspect, inspection failed, trace inspection errors, why did inspection fail, SLCI verification failures, limitation.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Set up signal capture for a Simulink Real-Time application using `slrealtime.Instrument`. Use when choosing which signals a real-time application captures and where the data goes — test-pointing or canvas-badging a signal before build (`TestPoint`, `DataLogging`), constructing an Instrument from an `.mldatx`, calling `addSignal`, `addInstrumentedSignals`, `addFileLogSignals`, `validate`, `connectCallback`, `copy`, or `generateScript`, attaching an instrument to `tg.Instruments` via `addForFileLog`, `addForSDI`, or `addForMATLAB`, setting up live-streaming signals, dynamic file-log workflows, or persisting an instrument as M-code. Selects and routes signals only — not for configuring, building, running, or connecting applications onto targets.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Use when you need to verify a Simulink model is compatible with SLCI code inspection, or to apply fixes for identified incompatibilities. Checks model configuration, identifies incompatibilities, and explains why each constraint is required for verification. Also invoked by slci-inspection-incompatibility-analysis to fix constraints and obtain compatibility results. Trigger keywords: checkCompatibility, SLCI compatibility, code inspection readiness, Model Advisor compatibility report.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Build, deploy, run, monitor, tune, and stop Simulink Real-Time applications. Use when the user wants to build a Simulink Real-Time model, load/start/stop an `.mldatx` on a target, set stop time or start options, drive root inports/playback/parameter stimulation, inspect installed or running apps, tune parameters with `getparam`/`setparam`, read ad hoc signal values with `getsignal`, manage parameter sets, control recording, or choose between file logging, live streaming, and file-log import. Covers `slbuild`, `install`, `load`, `start`, `stop`, `setStopTime`, `tg.Stimulation`, `startRecording`/`stopRecording`, `tg.FileLog.import`, `slrealtime.exportRun`, `getparam`/`setparam`, `getsignal`, and installed app management for Speedgoat targets and Simulink Real-Time Linux devices.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Collect and assess quality metrics for Simulink models using the metric.Engine API. Use when evaluating model design quality (maintainability, complexity, architecture) or testing completeness (unit testing, SIL, PIL, coverage, pass rates) after edits or test runs. Covers metric discovery, collection, report generation, and diagnostics. Triggers on: "collect metrics", "quality metrics", "metric.Engine", "testing metrics", "maintainability metrics", "SIL metrics", "PIL metrics", "what metrics are available", "assess quality", "coverage metrics", "generate metric report", "diagnose metric errors".

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Manage Simulink Real-Time target computers from MATLAB — list available targets, check whether a target is connected, read its lifecycle status, add/remove/rename targets, set IP addresses and credentials, choose the default target, install TLS material, configure a startup application, and run target lifecycle ops (connect, reboot, RTOS update). Use whenever the user asks "which targets are available", "is my target connected", "what's the status of the target", "add a Speedgoat", "switch default target", "change the target IP", "reboot the box", "update the target", or works with `slrealtime.Targets`, `tg = slrealtime`, `addTarget`, `removeTarget`, `getTargetNames`, `getDefaultTargetName`, `setDefaultTargetName`, `connect`, `isConnected`, `status(tg)`, `setipaddr`, `setupTLSCertificate`, `setStartupApp`, `reboot`, `update`, or `slrealtime.testSetup`. Covers Speedgoat target computers and Simulink Real-Time Linux devices.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Use when asked to run Design Error Detection (quick defect scan), find design errors in a Simulink model, perform root cause analysis on DED findings, fix division-by-zero, overflow, dead logic or out-of-bounds defects detected by SLDV, or diagnose why missing coverage cannot be achieved (dead logic blocking coverage objectives). Do NOT use for requirement verification, test generation, Inf/NaN detection, active logic analysis, or coverage measurement.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Configure Simulink models for Embedded Coder (ERT), Simulink Coder (GRT rapid-prototyping), or AUTOSAR code generation. Use when the user asks to generate embedded C or C++ code, run a full build of a model, produce a code generation report, configure a model for production/ECU deployment or rapid-prototyping code, target ARM or x86 hardware, apply MISRA C/C++ compliance (ERT/AUTOSAR only — Simulink Coder does not ship MISRA profiles), or set up GRT, ERT, AUTOSAR, or shared-library targets. Handles target selection, hardware mapping, model hierarchy propagation, and constraint introspection via the configure_for_codegen function. Do NOT use for GRT shared-library variants (grt_malloc.tlc), DDS, or ROS, or for iterative optimization workflows that measure baseline metrics, apply targeted changes, and re-measure to confirm improvement.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Configures Simulink simulations non-destructively using SimulationInput objects — parameter overrides without modifying the model, batch sweeps via parsim, custom input signals via Dataset, and simulation data retrieval via logsout. Use when running sim()/parsim() with setVariable, setBlockParameter, setExternalInput, or when performing parameter sweeps and multi-run analysis. Not needed for one-shot simulations without configuration.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Create, populate, and manage safety analysis spreadsheets (FMEA, FHA, HARA, custom) and fault trees (FTA) in Safety Analysis Manager. Use when the user asks to perform FMEA, hazard analysis, fault tree analysis, safety analysis, or work with Safety Analysis Manager documents. Requires Simulink Fault Analyzer.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Manages MATLAB projects for Simulink workflows: path management, file registration, labels, source control configuration, and project lifecycle. Use when creating projects, adding models/dictionaries/requirements to projects, configuring labels for automation, fixing broken model references, or setting up source control for Simulink artifacts.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Builds and edits Simulink, System Composer, Stateflow, and Simscape models. Use when modifying model structure, parameters, ports, connections, or Stateflow chart internals.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Estimate frequency response from Simulink models using frestimate. Use when frequency response should be obtained from simulation rather than model linearization.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Use when a Simulink model is incompatible with Simulink Design Verifier (sldvcompat returns false, or an SLDV analysis errors out on an unsupported construct) and needs to be made analyzable. Diagnoses the incompatibility, applies the matching fix to a copy, and confirms the copy is compatible; optionally raises confidence the fix preserved behavior via a back-to-back consistency replay (agreement on the generated tests, not a proof of equivalence). Do NOT use for running test generation, design error detection, or requirement verification themselves — only for making a model compatible so those can proceed.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Common steps for building multi-layer system architecture models using System Composer. Use when implementing architecture models or when interacting with interface dictionaries, allocation sets, stereotypes, and requirements for architecture components.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Import data into the Simulation Data Inspector (SDI) from MAT, CSV, or Excel files, from workspace variables, or from a Simulink simulation. Use when the user wants to view a logged file in SDI, load a bench-test log, or verify what a just-completed `Simulink.sdi.createRun` or `sim(model)` produced. Covers the `'file'`, `'vars'`, and `'namevalue'` sources of `createRun`, the auto-populate behavior after `sim()`, and post-import verification. Not for comparing existing runs (use `Simulink.sdi.compareRuns`); not for streaming data live during a running simulation (use `Simulink.sdi.createRunOrAddToStreamedRun` — a separate API); and not for authoring Gherkin or Simulink Test test cases, assertions, or regression tests (use `testing-simulink-models`). Do not activate on test-authoring or verification prompts even when no test-authoring skill is available — say so and stop.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Add, configure, and manage faults on Simulink, Simscape, and System Composer model signals for robustness analysis and safety validation. Use when injecting faults (stuck, noise, gain, offset) onto block inports/outports, enabling fault simulation, or analyzing fault effects. Covers sensor failures, signal corruptions, actuator faults, FMEA validation, and robustness testing. Requires Simulink Fault Analyzer.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Use this skill when the user asks to summarize, or asks why Simulink Coverage objectives are missing, unsatisfied, or uncovered on a coverage result they already have — why specific decision, condition, MCDC, relational-boundary, or saturation/overflow outcomes weren't exercised, whether uncovered logic is dead code, or how to close the gap (a test, a coverage filter, or a design change). It reads an existing cvdata, .cvt file, sim-with-coverage output, or Simulink Test result; it never runs cvsim to collect coverage.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Optimizes Simulink models for Embedded Coder generated code. Use when asked to optimize or improve generated code, or reduce code metrics for a Simulink model. Targets: execution time, memory footprint (RAM, ROM, stack, data copies), code size, MISRA compliance, or any semantically similar generated-code metric. Works iteratively — measures baseline, suggests changes, applies, and re-measures to confirm improvement. Triggers can be prompts similar to: optimize generated code runtime, reduce runtime, shrink code size, improve code efficiency, reduce memory usage, speed up generated code, follow MISRA compliance and so on. CAUTION: Do NOT attempt to optimize Simulink models for generated code efficiency without following this skill — the iterative measurement, gating, and rollback workflow is essential for safe optimization.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Use this skill when authoring, reworking, or validating a Classic AUTOSAR software component (SWC) in Simulink, including autosar.api mappings, runnables, timing events, sender-receiver ports, client-server operations, IRVs, BSW service callers, and component ARXML updates.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Customize A2L (ASAP2) files generated from Simulink models using coder.asap2 and coder.mapping APIs. Use this skill when adding COMPU_METHODs, creating GROUPs, converting STD_AXIS to COM_AXIS, adding BIT_OPERATIONs, creating VARIANT_CODING, excluding measurements or struct elements, removing DEFAULT_EVENT_LIST, or any A2L customization for calibration tool compatibility (INCA, CANape). Also use when the user mentions ASAP2, ECU calibration data, A2L export.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.

Guide users through creating and managing .satk/block-policy.json for controlling which blocks the agent can use, which are excluded, and which block parameters the agent should not modify. Use when setting up block usage policy for a project.

한국어 요약은 준비 중입니다. 원문 설명을 표시하고 있습니다.