Helm Dev Environment

Set up, run, and tear down the local Kubernetes development environment for OpenShell. The stack is: k3d (Docker-backed k3s) for the cluster, Skaffold for image builds and Helm deploys, and the OpenShell Helm chart (deploy/helm/openshell/).

---

Prerequisites

• Docker Desktop (macOS) or Docker Engine (Linux) running
• mise install completed (provides k3d, kubectl, skaffold, helm)

---

Startup

1. Create the cluster

mise run helm:k3s:create

Creates a k3d cluster and merges its kubeconfig into the worktree-local kubeconfig file. When the named cluster already exists, the task starts any stopped containers and refreshes same-named kubeconfig entries so a recreated load balancer's current API port takes effect. Also applies the upstream agent-sandbox CRDs/controller (pinned via AGENT_SANDBOX_VERSION in tasks/scripts/helm-k3s-local.sh, fetched from github.com/kubernetes-sigs/agent-sandbox releases), enables its OTLP tracing on v0.5 and later, installs an OTLP trace collector and UI in the observability namespace, and preloads the default sandbox image into k3d so the first sandbox create does not wait on a large registry pull. Traefik is disabled at cluster creation time.

Multi-worktree support: the cluster name is derived from the last component of the current git branch (e.g. branch chore/1234-local-dev/octocat → cluster openshell-dev-octocat). Each worktree therefore gets its own isolated cluster and its own kubeconfig file. Override with HELM_K3S_CLUSTER_NAME to force a specific name or share one cluster across worktrees.

Port mappings created at cluster time (cannot be changed without recreating):

Host port	Target	Used by
8080	Port 80 via k3d load balancer	Envoy Gateway LoadBalancer service (values-gateway.yaml)

Override with env vars before running helm:k3s:create:

• HELM_K3S_LB_HOST_PORT (default: 8080)
• HELM_K3S_PRELOAD_SANDBOX_IMAGE (default: nvcr.io/nvidia/base/ubuntu:24.04; set to an empty value to skip)
• HELM_K3S_COLLECTOR_IMAGE (default: mcr.microsoft.com/dotnet/aspire-dashboard:latest)
• HELM_K3S_COLLECTOR_HEALTH_TIMEOUT (default: 120 seconds)

2. Deploy OpenShell

Iterative dev (rebuilds on file changes, recommended during active development):

mise run helm:skaffold:dev

One-shot deploy (build once and leave running):

mise run helm:skaffold:run

Resource admission defaults to enabled and caller driver config to disabled. Driver-config scenarios need an explicit allowDriverConfig opt-in; external attachments also need administrator-controlled approval labels in the target namespace. GPU attachments and operator-selected image-pull Secrets are exempt from labels. Managed workspace image-pull Secrets are copied from the configured source in the gateway namespace; do not grant approval to the gateway database PVC or disable admission to make tests pass.

The Skaffold flow builds distinct gateway, sandbox, and supervisor images and deploys the OpenShell Helm chart. The Kubernetes driver creates a capability-free workload Pod and a directly managed capability-free supervisor Pod. One namespace-wide NetworkPolicy denies direct egress from every OpenShell workload Pod. The pkiInitJob hook (a pre-install Job that runs openshell-gateway generate-certs) generates gateway and CLI TLS secrets on first install. Supervisor Pods project only ca.crt and authenticate gateway RPCs with sandbox bearer tokens. User client certificates and private keys remain outside supervisor and workload Pods. The default Skaffold values export gateway and Kubernetes-driver traces to the collector service installed by helm:k3s:create. Envoy Gateway is opt-in; see the Optional Add-ons section.

The gateway Service uses ClusterIP. Access is via Envoy Gateway (port 8080) or the unified local forwarding task:

mise run helm:k3s:forward

The task forwards OTLP/gRPC to http://127.0.0.1:4317 and the trace UI to http://127.0.0.1:18888. When Skaffold has deployed a Kubernetes gateway, it also forwards the gateway to http://127.0.0.1:8090; otherwise it continues with the collector ports only. A successful plaintext helm:skaffold:run registers the gateway under the worktree-specific k3d cluster name and selects it as the active gateway. Keep the forwarding task running while using those endpoints.

Viewing local traces

The gateway exports OTLP/gRPC to http://openshell-collector.observability.svc.cluster.local:4317 through the default Skaffold values. Forward OTLP/gRPC and the trace UI to the host:

mise run helm:k3s:forward

Open http://127.0.0.1:18888 and exercise the gateway to inspect gateway and Kubernetes compute-driver spans under their distinct service names, along with Agent Sandbox controller reconciliation spans linked through the Sandbox trace-context annotation. The same command exposes OTLP/gRPC on http://127.0.0.1:4317 and, when deployed, the Kubernetes gateway on http://127.0.0.1:8090. The local gateway:docker, gateway:podman, and gateway:vm tasks detect the collector listener at startup and enable trace export only while it is reachable.

The Skaffold profile for HA reverse-proxy development is available from deploy/helm/openshell/:

# Two gateway replicas + external PostgreSQL Secret + Envoy Gateway + Gateway API route.
KUBECONFIG=../../../kubeconfig skaffold run -p high-availability

The high-availability profile expects a Secret named openshell-ha-pg in the openshell namespace with a uri key. For local manual testing, either create your own PostgreSQL Secret or use the e2e PostgreSQL fixture manifest in e2e/kubernetes/postgres-fixture.yaml.

For the high-availability profile, return to the repository root and apply the GatewayClass and BackendTrafficPolicy manifest after Skaffold has installed Envoy Gateway:

KUBECONFIG=kubeconfig mise run helm:gateway:apply

The BackendTrafficPolicy disables Envoy request and stream-duration timeouts for OpenShell's GRPCRoute. Keep that policy in deploy/kube/manifests/envoy-gateway-openshell.yaml, not in the Helm chart; it is required for long-lived gRPC create/watch/exec/relay streams during gateway rollouts and scale events.

TLS behaviour

ci/values-skaffold.yaml sets server.disableTls: true, so Skaffold-based deploys run plaintext by default. Override server.disableTls=false to exercise TLS/mTLS.

Mode	server.disableTls	Gateway scheme
Skaffold dev (default)	true	http://
TLS enabled	false (or omitted)	https://

Connecting through the forwarding task

Port 8080 is already bound by the k3d load balancer when Envoy Gateway is active, so the forwarding task uses local port 8090 for the gateway. In a second terminal, confirm that the gateway is registered and active:

openshell gateway list

Plaintext (default Skaffold deploy):

openshell sandbox list

With mTLS enabled — extract the client cert the PKI hook wrote to the cluster, then place it where the CLI expects it. Run once after each fresh install:

mkdir -p ~/.config/openshell/gateways/openshell/mtls
KUBECONFIG=kubeconfig kubectl get secret openshell-client-tls -n openshell \
  -o jsonpath='{.data.ca\.crt}'  | base64 -d > ~/.config/openshell/gateways/openshell/mtls/ca.crt
KUBECONFIG=kubeconfig kubectl get secret openshell-client-tls -n openshell \
  -o jsonpath='{.data.tls\.crt}' | base64 -d > ~/.config/openshell/gateways/openshell/mtls/tls.crt
KUBECONFIG=kubeconfig kubectl get secret openshell-client-tls -n openshell \
  -o jsonpath='{.data.tls\.key}' | base64 -d > ~/.config/openshell/gateways/openshell/mtls/tls.key

The server cert SANs include localhost and 127.0.0.1, so hostname verification passes over a port-forward without any extra flags:

openshell sandbox list --gateway-endpoint https://localhost:8090

---

Teardown

Remove the Helm releases (keep cluster)

mise run helm:skaffold:delete

Delete the cluster entirely

mise run helm:k3s:delete

This removes the k3d cluster and all resources. Kubeconfig context is left behind but will point to a deleted cluster — safe to ignore or clean up manually.

---

Optional Add-ons

Some add-ons can be enabled by uncommenting values in skaffold.yaml, but prefer the dedicated Skaffold profiles when they exist. Profiles avoid leaving local manual edits in the worktree.

Envoy Gateway (Gateway API / GRPCRoute)

Use the high-availability Skaffold profile for HA reverse-proxy testing. The profile intentionally includes Envoy Gateway so multi-replica behavior is exercised through the same Gateway API path used by reverse-proxy deployments:

cd deploy/helm/openshell
KUBECONFIG=../../../kubeconfig skaffold run -p high-availability
cd ../../..
KUBECONFIG=kubeconfig mise run helm:gateway:apply

values-gateway.yaml creates the openshell Gateway (listener on port 80, class eg) and an openshell GRPCRoute in the openshell namespace. The high-availability profile installs the Envoy Gateway Helm chart and layers both values-high-availability.yaml and values-gateway.yaml onto the OpenShell release.

deploy/kube/manifests/envoy-gateway-openshell.yaml creates:

• GatewayClass/eg
• BackendTrafficPolicy/openshell-grpc-timeouts

The Envoy Gateway proxy Service is usually exposed through the k3d load balancer at http://127.0.0.1:8080. If the cluster was created with a different HELM_K3S_LB_HOST_PORT, use that host port instead.

For manual tests against an existing cluster, prefer forwarding the Envoy proxy Service rather than svc/openshell. That keeps client traffic on the same path as a real reverse proxy while gateway pods rotate behind it:

KUBECONFIG=kubeconfig kubectl get svc -A \
  -l gateway.envoyproxy.io/owning-gateway-name=openshell
KUBECONFIG=kubeconfig kubectl -n <envoy-service-namespace> port-forward \
  svc/<envoy-service-name> 8080:80
openshell gateway add http://127.0.0.1:8080 --name openshell --local

When running e2e tests manually through Envoy, register gateway metadata (as above) instead of relying only on OPENSHELL_GATEWAY_ENDPOINT; some tests call openshell gateway info and expect metadata for the active gateway.

Kubernetes E2E Notes

Use mise run e2e:kubernetes for the standard Helm-backed Kubernetes suite. The kube e2e wrapper creates only one port-forward, to svc/openshell; it no longer forwards the unauthenticated health listener or runs a /readyz e2e target. /readyz remains covered by server unit/integration tests.

Use mise run e2e:kubernetes:ha-rebalancing for full-suite HA coverage. The task creates an external PostgreSQL fixture, installs Envoy Gateway, applies deploy/kube/manifests/envoy-gateway-openshell.yaml, enables the chart GRPCRoute, and runs the full Kubernetes e2e suite, including kubernetes_ha_rebalancing. That coverage validates sandbox create/watch and exec through the Envoy proxy while gateway replicas scale up, scale down, and rotate. It also keeps a long-running sandbox alive and runs upload/download operations while gateway pods roll, so file sync exercises the same relay retry path as interactive sessions.

If you reuse an existing Skaffold cluster for the full kube suite, make sure the chart has server.hostGatewayIP set so sandbox pods can resolve host.openshell.internal back to the test host. The e2e wrapper detects this on chart installs; manual reuse may require:

HOST_GATEWAY_IP="${OPENSHELL_E2E_HOST_GATEWAY_IP:?set host gateway IP}"
KUBECONFIG=kubeconfig helm upgrade openshell deploy/helm/openshell \
  --namespace openshell --reuse-values \
  --set "server.hostGatewayIP=${HOST_GATEWAY_IP}" \
  --wait --timeout 5m

Use the IP that pods in that cluster use to reach listeners on the test host.

BackendTLSPolicy (end-to-end TLS)

To enable end-to-end TLS between the Gateway proxy and the gateway pod, add BackendTLSPolicy values to the Helm install:

helm upgrade --install openshell deploy/helm/openshell \
  --set grpcRoute.enabled=true \
  --set grpcRoute.backendTLSPolicy.enabled=true \
  --set server.tls.enableMtls=false \
  ...

This requires server.tls.enableMtls=false because ingress proxies cannot present client certificates to the backend. The certgen hook creates a backend CA ConfigMap from the server Secret's ca.crt key. With cert-manager, a separate post-install Job polls for the cert-manager-issued certificate (up to pkiInitJob.timeoutSeconds); with built-in PKI the ConfigMap is created in the same pre-install hook. The ConfigMap is reconciled on every upgrade so CA rotations propagate automatically.

Key Helm values:

• grpcRoute.backendTLSPolicy.enabled: create the BackendTLSPolicy resource
• grpcRoute.backendTLSPolicy.caCertificateConfigMapName: override ConfigMap name
• grpcRoute.backendTLSPolicy.hostname: override backend validation hostname
• server.tls.enableMtls: must be false for BackendTLSPolicy
• pkiInitJob.timeoutSeconds: polling duration for cert-manager mode
• pkiInitJob.failOnTimeout: fail install if cert-manager times out

Keycloak OIDC

Initial setup — rerun it whenever you want to rotate the development CA:

mise run keycloak:k8s:setup

This deploys Keycloak (quay.io/keycloak/keycloak:24.0) into the keycloak namespace, imports the openshell realm from scripts/keycloak-realm.json, generates a short-lived development TLS certificate, and publishes its trust anchor as the openshell-keycloak-ca ConfigMap in the OpenShell namespace. The command prints a port-forward command for acquiring tokens from the CLI. Rerunning setup rotates the development certificate and trust anchor; redeploy the gateway afterward so it reloads the mounted CA bundle.

Then activate OIDC in the OpenShell Helm chart:

1. Uncomment #- ci/values-keycloak.yaml in skaffold.yaml
2. Redeploy: mise run helm:skaffold:run

To remove Keycloak:

mise run keycloak:k8s:teardown

SPIRE / SPIFFE Provider Token Grants

Skaffold can install SPIRE with the SPIFFE hardened Helm charts. To activate SPIFFE JWT-SVIDs for dynamic provider token grants:

1. Uncomment the spire-crds and spire releases in deploy/helm/openshell/skaffold.yaml
2. Uncomment #- ci/values-spire.yaml in the OpenShell release values files
3. Redeploy: mise run helm:skaffold:run

ci/values-spire-stack.yaml configures the local SPIRE trust domain as openshell.local and adds a ClusterSPIFFEID that maps sandbox pod annotations to spiffe://openshell.local/openshell/sandbox/<sandbox-id>. OpenShell mounts the SPIFFE CSI Workload API socket at /spiffe-workload-api/spire-agent.sock only into supervisor Pods for provider token grants. Supervisor-to-gateway authentication remains on the Kubernetes ServiceAccount bootstrap and gateway-minted sandbox JWT path; the selected Kubernetes compute driver validates the projected token before the gateway returns the current generation-bound session JWT. The driver also returns the runtime identity recorded during provisioning. Restart preserves its namespace and Sandbox CR UID, rejects ambiguous label matches, and rotates only the supervisor Pod UID; bootstrap fails when the live identity does not match the durable sandbox record.

Vault Credential Driver

The credential-driver-vault Skaffold profile applies ci/values-credential-driver-vault.yaml. Its external OpenBao/Vault backend must expose HTTPS at the configured service DNS name and publish the issuing CA certificate as the ca.crt key in the openbao-ca ConfigMap. Local e2e uses OpenBao dev TLS and an openbao-0 DNS alias matching its generated certificate. The Helm value server.credentialDrivers.vault.caConfigMapName mounts that key into the gateway and renders the driver's ca_bundle setting. Non-loopback HTTP addresses fail gateway startup, and hostname verification requires the service DNS name in the server certificate SANs.

cd deploy/helm/openshell
skaffold run -p credential-driver-vault
kubectl -n openshell logs statefulset/openshell -c openshell-gateway --tail=200

---

Cluster Lifecycle (stop/start)

Stop the cluster without losing state (faster than delete/recreate):

mise run helm:k3s:stop
mise run helm:k3s:start

Check cluster status:

mise run helm:k3s:status

---

Helm Chart Checks

Run the chart lint task before changing Helm templates, values overlays, or Skaffold inputs:

mise run helm:lint

If Helm reports missing chart dependencies, remove the specific stale subchart archive or directory named by the error from deploy/helm/openshell/charts/, then rerun the lint task.

For example, when lint reports chart metadata is missing these dependencies: postgresql, remove stale PostgreSQL chart artifacts:

rm -f deploy/helm/openshell/charts/postgresql-*.tgz
rm -rf deploy/helm/openshell/charts/postgresql
mise run helm:lint

The charts/ directory is ignored and regenerated by helm dependency build for dependencies still declared in Chart.yaml.

---

Key Files

Path	Purpose
deploy/helm/openshell/skaffold.yaml	Skaffold config — images, Helm releases, values overlays
deploy/helm/openshell/values.yaml	Default Helm values
deploy/helm/openshell/ci/values-skaffold.yaml	Dev overrides (image pull policy, TLS disabled for local Skaffold)
deploy/helm/openshell/ci/values-cert-manager.yaml	cert-manager PKI overlay (opt-in; disables pkiInitJob)
deploy/helm/openshell/ci/values-gateway.yaml	Envoy Gateway GRPCRoute + Gateway overlay
deploy/helm/openshell/ci/values-high-availability.yaml	HA test overlay (replicaCount: 2 with external PostgreSQL Secret)
deploy/helm/openshell/ci/values-autoscaling.yaml	Render-only overlay for the optional gateway HorizontalPodAutoscaler (helm lint and helm-unittest)
deploy/helm/openshell/ci/values-keycloak.yaml	Keycloak OIDC overlay
deploy/helm/openshell/ci/values-spire.yaml	SPIFFE/SPIRE provider token grant overlay
deploy/helm/openshell/ci/values-spire-stack.yaml	SPIRE hardened chart values for local dev
deploy/helm/openshell/ci/values-tls-disabled.yaml	Lint-only: TLS + auth disabled (reverse-proxy edge termination)
deploy/helm/openshell/ci/values-credential-driver-vault.yaml	Vault credential-driver validation overlay with HTTPS and private-CA trust
deploy/kube/manifests/envoy-gateway-openshell.yaml	GatewayClass and BackendTrafficPolicy for Envoy Gateway (mise run helm:gateway:apply)
tasks/scripts/helm-k3s-local.sh	k3d cluster create/delete/start/stop/status
tasks/scripts/keycloak-k8s-setup.sh	Keycloak deploy, realm import, and development TLS trust anchor